Blasting
Mostrando 1-12 de 47 artigos, teses e dissertações.
-
1. Peculiarities of drilling and blasting in underground small-scale mines
Abstract Artisanal and Small-scale Mining (ASM) is a prominent activity in the extractive industry: considering only gold, it produces about 20% of the world market supply. Despite this fact, ASM is generally associated with the negative aspects of its environ mental impact, and operational research is generally neglected. This article empha sizes the peculi
REM, Int. Eng. J.. Publicado em: 2020-09
-
2. Modeling non-ideal velocity of detonation in rock blasting
Abstract The performance of commercial explosives is an important subject in rock blast ing modeling and simulation. As a result of its non-ideal behavior, these explosives usu ally react below their ideal detonation velocity. In these cases, the multi-dimensional effects, heterogeneities and confinement conditions become important for properly quantifying t
REM, Int. Eng. J.. Publicado em: 2020-09
-
3. Avaliação da resistência de união de uma cerâmica de óxido de zircônia submetida a tratamentos de superfície por abrasão
Resumo Introdução A cimentação adesiva, com cerâmicas puras, é um passo relevante no estabelecimento da longevidade de trabalhos protéticos, sendo estes os melhores materiais utilizados para a reposição de dentes perdidos, de forma a reabilitar o sorriso. O sistema cerâmico de zircônia não se beneficia do tratamento com ácidos e necessita de di
Rev. odontol. UNESP. Publicado em: 12/09/2019
-
4. Influence of blasting charges and delays on the energy consumption of mechanical crushing
Abstract This article deals with a study performed at the Experimental Mine of the Research Center of Responsible Mining of the University of São Paulo, to examine the correlations between geological environment, blasting parameters and energy consumption in the primary crushing phase. The research is designed to appreciate the relationships between the ene
REM, Int. Eng. J.. Publicado em: 2019-06
-
5. An integrated pit-to-plant approach using technological models for strategic mine planning of copper and gold deposits
Abstract The strategic mine plan is a crucial step for the success of mining companies, and for its development, it is necessary to use a number of inter-related variables that are usually estimated independently. These variables include operational data that is traditionally isolated in information islands between the different departments in the mine or th
REM, Int. Eng. J.. Publicado em: 2019-06
-
6. A review of the benefits for comminution circuits offered by rock blasting
Abstract Rock blasting is the first phase of comminution, completed by mechanical means downstream in the crushing and milling phases. Nevertheless, mineral processers and blasters seldom work together. The total energy of mechanical comminution depends on feeding grain size and on the internal resistance of the material to grinding. Blasting heavily influen
REM, Int. Eng. J.. Publicado em: 2019-03
-
7. Estudio de los parámetros de proceso del anodizado por plasma químico en Ti-6Al-4V ELI para implantes dentales
ABSTRACT In order to study the variation effect of some parameters of micro-arc oxidation process (MAO) on Ti-6Al-4V samples for dental implants, several treatments were carried out under different conditions of current density, exposure time and electrolyte chemical composition. These processes resulted in generated bioactive titanium oxide surface coatings
Matéria (Rio J.). Publicado em: 19/07/2018
-
8. Análisis de la forma de onda de señales de Emisión Acústica producida en ensayos de interfaces ceramo-metálicas
ABSTRACT The study of ceramic-metal interface is of special importance in odontology area by the current demand about dental prostheses, so it is very important to be more and more similar to natural teeth and with a long service life. With the aim of assessing in detail the behavior of ceramic-metal interface used in dental restorations systems, in this wor
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Efectos de tratamientos térmicos post-alcalinos sobre las propiedades superficiales de titanio para implantes dentales con diferentes recubrimientos
ABSTRACT Titanium is widely used as dental implant since it is bio-inert and osseointegratable. However, provided that this material cannot induce bone growth from its surface, it is usual to carry out different surface treatments in order to develop bioactive coatings that increase both the initial rate of bone development and the biological anchorage of im
Matéria (Rio J.). Publicado em: 19/07/2018
-
10. Dynamic crack propagation of granite subjected to biaxial confining pressure and blast loading
Abstract To great understanding the dynamic crack propagation of rock under in-situ stress and blasting, the static-dynamic loading experimental platform was built. With different confining pressure (0MPa, 2MPa, 4MPa, 6MPa, 8MPa) and different ratios (K) of horizontal-to-vertical pressure (0, 0.25, 0.5, 0.75, 1), nine texts have been carried out in quadrate
Lat. Am. j. solids struct.. Publicado em: 02/07/2018
-
11. Laboratory study of dynamic mechanical characteristic of granite subjected to confining pressure and cyclic blast loading
Abstract To investigate the deformation characteristic of deep rock under cyclic blasting, the static-dynamic loading experimental equipment was set up. The dynamic strain gauges and high-speed (HS) camera were adopted to obtain strain field and the crack propagation of rock under confining pressure of 0 MPa, 5 MPa and 10 MPa. Under the one-time loading fro
Lat. Am. j. solids struct.. Publicado em: 28/06/2018
-
12. Comparing blast-induced ground vibration models using ANN and empirical geomechanical relationships
Abstract Blasting remains as an economical and reliable excavation technique, but there are some environmental shortcomings such as the control of blast-induced vibration. The impacts of vibration over surrounding communities in a blast area have been investigated for decades and researchers have been using a myriad of empirical predictive attenuation equati
REM, Int. Eng. J.. Publicado em: 2018-03