Analysis of the hydrodynamic profile of different models of roller pump used in extracorporeal circulation / Analise do perfil hidrodinamico em diferentes modelos de bombas de roletes utilizadas em circulação extracorporea

AUTOR(ES)
DATA DE PUBLICAÇÃO

2009

RESUMO

Introduction: Among the equipment used in cardiopulmonary bypass, roller pumps have great importance, with models available from several manufacturers. The roller adjustment is an important factor in the rates of hemolysis and the hemolytic potential differs in adjustment. Researchers do not always address details on the profiles of the raceway accepting that the forms of standardized settings ensure equal and comparable values for all models of roller pumps. There are two methods for setting roller pumps and none considers the dynamic characteristics of the fluid, defined by the profile of the raceway. Objective: The aim of this study is to analyze the hydrodynamic profile of three different models of roller pumps commercialized in Brazil and its influence on the flow and back flow. Materials and methods: We used silicone tubes of 9.5x1.6, 9.5 x2.4 and 13x2.4 mm in diameter from two different suppliers. The tests were performed in saline and solution analogous to blood. The hydrodynamic profile in three roller pumps was achieved by measurements of drop rate and dynamic calibration. The drop rate variations were investigated in silicone tubes by measurements of drop rate and the compression tests in servo-hydraulic equipment. Retrograde flows were viewed in blood aspirator and cardiotomy reservoir. Results: The hydrodynamic profiles showed differences in their variances for measurements of drop rate (P <0.01) and dynamic calibration (P <0.0001). The residual stress in the silicone tubes caused reduction in drop rate with time (P<0.0002) and were confirmed by compression tests (P <0.0001). Conclusion: The adjustments made by the methods of drop rate and dynamic calibration are dependent on the raceway profile. Comparisons involving roller pumps must be made with caution. The residual stress in the silicone tubes compromises repeatability of adjustments made by the drop rate method

ASSUNTO(S)

escoamento pulsatil calibração dinamica dos fluidos - medição fluid dynamics pulsatile flow artificial organs calibration orgãos artificiais

ACESSO AO ARTIGO

Documentos Relacionados