Api 5l X70
Mostrando 1-12 de 38 artigos, teses e dissertações.
-
1. Study on influence of the PTA-P welding process parameters on corrosion behavior of Inconel 625 coatings
ABSTRACT In the present work, PTA welding process was used to investigate the influence of welding parameters on the dilution, microhardness and corrosion resistance of Inconel 625 alloy coatings on the API 5L X70 grade steel. The electrochemical impedance spectroscopy (EIS) and linear potentiodynamic polarization (LPP) measurements were used to study the pr
Matéria (Rio J.). Publicado em: 20/05/2019
-
2. Análise da Influência de Parâmetros de Soldagem em Características Microestruturais e Mecânicas de Juntas Soldadas de um Tubo de Aço API X70Q para Aplicação Sour Service
Resumo O aço X70 é um material que possui boa relação entre resistência mecânica e tenacidade, sendo um grau bastante utilizado em condução/transporte de óleo e gás. Com o objetivo de avaliar a soldabilidade deste material, características microestruturais e mecânicas foram avaliadas ao longo da seção transversal de juntas obtidas por soldage
Soldag. insp.. Publicado em: 10/07/2018
-
3. Fissuração pelo Hidrogênio em um Aço API 5L X70 Soldado com Eletrodos Celulósicos de Diferentes Níveis de Resistência
Resumo Aços classificados segundo a norma do American Petroleum Institute (API) enfrentam o problema de trincamento a frio decorrente da soldagem. Neste trabalho foi estudado, por meio do ensaio de implante, o efeito da resistência mecânica do metal de solda sobre a susceptibilidade de um aço API-5L-X70 ao trincamento pelo hidrogênio. As soldas foram
Soldag. insp.. Publicado em: 2018-03
-
4. Influence of Niobium and Molybdenum on Mechanical Strength and Wear Resistance of Microalloyed Steels
The HSLA (High-Strength Low Alloy) steels are used in the production of pipes, flanges and connectors to build ducts for ore, oil and gas transport. The conventional processes are the rolling or forging. In the transport of ore and heavy oil, the abrasive particles impair the surfaces and reduce the pipelines lifetime. Therefore, besides the mechanical prope
Mat. Res.. Publicado em: 05/06/2017
-
5. Evaluation of Microstructure and Mechanical Properties of Seamless Steel Pipes API 5L Type Obtained by Different Processes of Heat Treatments
This research presents the influence of manufacturing processes and heat treatments on the resulting microstructures and mechanical properties of an API 5L PSL2 seamless steel pipe. Three different conditions are considered - as rolled, normalized and quenched and tempered - to obtain the grades X42R, X42N and X70Q, respectively. Scanning electron microscopy
Mat. Res.. Publicado em: 06/03/2017
-
6. Avaliação da Influência do Regime Térmico em Ambos os Lados da Junta na Soldagem Orbital
Resumo O objetivo do presente trabalho é a análise qualitativa da variação de temperatura em ambos os lados da junta soldada, de forma a verificar se esta variabilidade pode ter contribuído no aparecimento de descontinuidades, em destaque a falta de fusão lateral. O aparecimento da descontinuidade pode estar relacionado com a diferença de temperatura
Soldag. insp.. Publicado em: 05/01/2017
-
7. Effect of Rolling in the Recrystallization Temperature Region Associated with a Post-Heat Treatment on the Microstructure, Crystal Orientation, and Mechanical Properties of API 5L X70 Pipeline Steel
In order to improve the mechanical properties of API X70 pipeline steel, a rolling schedule in the recrystallization temperature region associated with a post heat treatment was proposed. Optical and scanning electron microscopy, electron backscattered diffraction, hardness, and tensile tests were carried out to show the effects of microstructure and crystal
Mat. Res.. Publicado em: 08/12/2016
-
8. Residual Stress Evaluation by X-Ray Diffraction and Hole-Drilling in an API 5L X70 Steel Pipe Bent by Hot Induction
The API 5L X70 steel is used in high-pressure gas transmission pipelines. Because of this, knowledge of presence of residual stress and their magnitude is important to assess the material integrity in service. For the pipeline manufacturing, tubes need to be curved which is often made using the hot induction bending process. This process can introduce differ
Mat. Res.. Publicado em: 09/09/2016
-
9. Strategies for corrosion inhibition of slurry pipelines prior to commissioning
Abstract A practice used to prevent corrosion in buried slurry pipelines is the hibernation of pipelines with an aqueous solution containing corrosion inhibitors before beginning the mining operation. The aim of this work is to evaluate the corrosion resistance of API 5L X70 steel used in the slurry pipelines in hibernation solution containing sodium sulphit
Rem: Rev. Esc. Minas. Publicado em: 2016-06
-
10. Características de um aço microligado forjado API 5L
RESUMO Nos aços microligados da série API (American Petroleum Institute) utilizados na fabricação de dutos de grande diâmetro, a resistência mecânica deve ser suficiente para suportar as elevadas pressões do fluido transportado na indústria petroquímica. O aumento da resistência mecânica e da tenacidade para permitir a operação da linha em pres
Matéria (Rio J.). Publicado em: 2015-12
-
11. Optimización de los Parámetros de Soldadura por Arco Sumergido en Acero HSLA: una Aplicación para Manufactura de Tuberías de Conducción de Hidrocarburos
Abstract The HSLA steel API 5L X70 is used to manufacture pipes for transporting hydrocarbons. The construction of pipe of this material involves high amount of welding, where the parameters used affect directly in the metallurgical structure and in the mechanical properties thereof when welded. Thus, to study the impact of the parameters of the submerged ar
Soldag. insp.. Publicado em: 2015-12
-
12. Avaliação da Influência de Tratamentos Térmicos Pós-Soldagem Sobre a Microestrutura e Propriedades Mecânicas de Juntas de um Aço API 5L X70Q
ResumoAços que atendem à norma API 5L são aplicados na construção de dutos e há grande interesse naqueles de maior resistência, como o grau API 5L X70Q. Ainda são escassos os estudos relacionados a tubos sem costura. Durante a montagem, os tubos podem ser soldados por eletrodos revestidos (SMAW) e eventualmente sofrer aquecimento indutivo para adequa
Soldag. insp.. Publicado em: 2015-06