Alloying Elements
Mostrando 13-24 de 48 artigos, teses e dissertações.
-
13. Effect of Alloying Elements in Melt Spun Mg-alloys for Hydrogen Storage
Abstract In this paper we report the effect of alloying elements on hydrogen storage properties of melt-spun Mg-based alloys. The base alloys Mg90Si10, Mg90Cu10, Mg65Cu35 (at%) were studied. We also investigated the effect of rare earths (using MM: mischmetal) and Al in Mg65Cu25Al10, Mg65Cu25MM10 and Mg65Cu10Al15MM10 alloys. All the melt-spun alloys without
Mat. Res.. Publicado em: 28/07/2016
-
14. Composition, Elastic Property and Packing Efficiency Predictions for Bulk Metallic Glasses in Binary, Ternary and Quaternary Systems
The results of database based on the efficiency packed model for metallic glasses. The database contains the atomic radii information as well as elastic properties of the most commonly used alloying elements, permitting composition, packing efficiency and elastic property predictions to be made for binary, ternary and quaternary bulk metallic glasses. Twenty
Mat. Res.. Publicado em: 08/03/2016
-
15. Comportamiento a la corrosión atmosférica marina de aceros autopatinables con estructura ferrítico perlítica y ferrítico martensítica
ABSTRACTThe steel industry constantly faces the challenge of developing new and better steels for diverse needs, on of this necessities is the use of structural steels with higher corrosion resistance to marine atmospheres and improved mechanical properties than those that currently exist. Therefore, it is necessary to systematically research both the influe
Matéria (Rio J.). Publicado em: 2015-09
-
16. Influencia de Ni y Ti en la respuesta a la corrosión marina simulada de un acero autopatinable A242
ABSTRACTThere is a great interest in the steel industry to incorporate new products in the market with better properties of those already in production. Among these properties, corrosion resistance is of great importance for countries with a large marine seacoast, like Chile, where chloride ions from sea spray produce corrosion, leading to irreversible failu
Matéria (Rio J.). Publicado em: 2015-09
-
17. Changes in the properties of Cu-Al-Mn shape memory alloy due to quaternary addition of different elements
Advantages of Cu based shape memory alloy include amongst other features, high transformation temperature, low cost of production, ease in manufacturing processes and ability to vary the achieved properties through alloying additions. It has been often reported that these alloys are very sensitive to the alloying additions in terms of properties achieved and
Matéria (Rio J.). Publicado em: 2015-03
-
18. Sinterability and microstructure evolution during sintering of ferrous powder mixtures
The present work is focused on ferrous powder metallurgy and presents some results of a development of a suitable masteralloy for use as an additive to iron powder for the production of sintered steels. The masteralloy was produced by melting a powder mixture containing approximately Fe + 20% Ni + 20% Mn + 20% Si + 1% C (wt%), in order to obtain a cast bille
Mat. Res.. Publicado em: 28/05/2013
-
19. Preparation and characterization of stainless steel 316L/HA biocomposite
The austenitic stainless steel 316L is the most used metallic biomaterials in orthopedics applications, especially in the manufacture of articulated prostheses and as structural elements in fracture fixation, since it has high mechanical strength. However, because it is biologically inactive, it does not form chemical bond with bone tissue, it is fixed only
Mat. Res.. Publicado em: 21/12/2012
-
20. Application of ANFIS for analytical modeling of tensile strength of functionally graded steels
In the present study, the tensile strength of ferritic and austenitic functionally graded steels produced by electroslag remelting has been modeled. To produce functionally graded steels, two slices of plain carbon steel and austenitic stainless steels were spot welded and used as electroslag remelting electrode. Functionally graded steel containing graded l
Materials Research. Publicado em: 05/04/2012
-
21. Aplicação de espectroscopia de fotoelétrons ao estudo de processos de corrosão e oxidação de superfícies metálicas: Inconel 182, Fe/Cu(100) e U-Zr-Nb / Aplicação de espectroscopia de fotoelétrons ao estudo de processos de corrosão e oxidação de superfícies metálicas: Inconel 182, Fe/Cu(100) e U-Zr-Nb
In this work a study of the oxidation/corrosion process of three systems of metallic materials by Photoemission Spectroscopy is presented. In the first system, it was investigated the corrosion of Inconel 182 at simulated Pressurized Water Reactor (PWR) environment. Samples with and without surface chemical treatment were exposed to the simulated environment
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/05/2011
-
22. Efecto sobre la dilución de la granulometría de la ferroaleación en el alma de electrodos tubulares revestidos bajo la influencia de la composición del revestimiento
The possibility of working at lower current and, consequently, reaching low dilution, points out advantages in the use of metal cored coated electrodes over conventional ones for hardafacing. It is known that the grain size of the filling alloy elements plays important role in the exothermic oxidation process, reflecting on the operational characteristics of
Soldagem & Inspeção. Publicado em: 2011-03
-
23. Tratamento de envelhecimento artificial das ligas 356 e a 356: efeitos da composição química, do tempo e da temperatura nas propriedades mecânicas / Artificial aging heat treatment of 356 and A356 aluminum alloy: effect of chemical composition, time and temperature on the mechanical properties
This study evaluates the effect of chemical composition and heat treatment of aging on the mechanical properties of aluminum alloy 356. The variables of heat treatment were the magnesium content, time and temperature. Additionally, the effect of alloying elements present as Fe and Mn were also evaluated by comparing with the A356 which is the purest version
Publicado em: 2010
-
24. Caracterização microestrutural da decomposição de carbonetos eutéticos M2C em ferro fundido multicomponente do tipo Fe-2C-5V-5Cr-5Mo-5W tratados isotermicamente à 950ºC e 1.050ºC. / Microstructural characterization of M2C eutectic carbides decomposition in multicomponent cast iron of type Fe-2C-5V-5Cr-5Mo-5W isothermically heat treated at 950°C e 1.050°C.
Multicomponent White Cast Iron are high temperature wear resistant ferrous alloys, presenting eutectic MC and M2C carbides in their as cast structure. In the present work the decomposition microstructures of the metastable M2C carbide after heat treatments was characterized in a model multicomponent white cast iron with composition (in weight): 2 wt% C and 5
Publicado em: 2010