Ad Converter
Mostrando 1-12 de 17 artigos, teses e dissertações.
-
1. Non-Linear Model to Describe Growth Curves of Commercial Turkey in the Tropics of Mexico
ABSTRACT The objective of this study was to select the best non-linear model that fits the growth curve of turkeys managed under the tropical conditions of Southern Mexico. Data from 481 Hybrid converter turkeys (236 females and 245 males) reared under commercial conditions typical of that region were used. Turkeys were given ad libitum access to feed and wa
Rev. Bras. Cienc. Avic.. Publicado em: 2017-03
-
2. DESENVOLVIMENTO DE UM CONVERSOR A/D INTEGRADOR COM FAIXA DE ENTRADA E RESOLUÇÃO PROGRAMÁVEL A CAPACITOR CHAVEADO / DEVELOPMENT OF AN A / D CONVERTER INTEGRATOR WITH TRACK OF ENTRY AND PROGRAMMABLE RESOLUTION TO SWITCHED CAPACITOR
Circuitos integrados programáveis possibilitam o seu ajuste após a fabricação, para se adequarem a mais de uma aplicação dentro de um conjunto determinado de aplicações. Um sistema de medição programável pode ser aplicado em medições que envolvam um conjunto de sensores com características diferentes de sinais e um conversor analógico-digital.
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/04/2012
-
3. MODULADOR SI-ΣΔ CASCATA 2-2 EMPREGANDO ARQUITETURA DE BAIXA DISTORÇÃO APLICADO À CONVERSÃO AD / (A CASCADE 2-2 SI-ΣΔ MODULATOR USING A LOW-DISTORTION TOPOLOGY APPLIED TO AD CONVERSION
A crescente complexidade dos circuitos digitais força o uso de novas tecnologias de fabricação. A mudança para tecnologias mais avançadas tem como vantagem a redução do tamanho do circuito e a diminuição do consumo de energia aliados ao aumento da velocidade de operação. Grande parte das operações envolvendo processamento de sinais migraram para
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 16/03/2012
-
4. Projeto de um conversor analógico-digital para um receptor Bluetooth em tecnologia CMOS. / Analog to digital converter design for a Bluetooth receiver in CMOS technology.
In this work, an Analog to Digital Converter (ADC) fulfilling the Bluetooth standard specifications is designed. This block stays at the reception side of an integrated wireless transceiver in CMOS technology. Initially, an analysis of the ADC as a system is carried out, at the same time that the specifications at that level are developed. The architecture a
Publicado em: 2010
-
5. Active magnetic bearing applied to a tubular linear induction motor. / Mancal magnético ativo aplicado a um motor de indução linear tubular.
A tubular linear induction motor applied to onshore oil exploitation, named MATÆOS (which is in the Portuguese acronym for Tubular Asynchronous Motor for Onshore Oil Exploitation) was built at Escola Politécnica da Universidade de São Paulo (EPUSP). Its purpose is to directly drive the sucker-rod pump installed in the down hole of the oil well. In continu
Publicado em: 2009
-
6. Food mechanics: a new device for testing fruits and vegetables
The new mechanical device developed is capable of performing compression tests but also bending, torsion and tensile tests. Its measurement system has the following components: a load cell (0 to 9800 N), a strain gauge signal conditioning board, a plug-in general purpose data acquisition board, and a displacement sensor (0 to 29.7 mm). These components are c
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2007-03
-
7. Fuzzy modelling for trajectory fixation in chaotic systems. / Modelagem fuzzy para fixação de trajetórias em sistemas caóticos.
A mapping of analytical tools for representation and computational treatment of Fuzzy Systems was made in this thesis. This mapping evidenced the existence of relations and the adequacy of the use of the Fuzzy Theory in the models construction for the problems solution involving dynamic systems e, in particular, of chaotic systems. A differentiation was cons
Publicado em: 2007
-
8. Sistema de controle e automação aplicável a secadores em camada fina utilizando-se instrumentos digitais endereçáveis / Automation and control system applicable to thin-layer grain dryer by using digital addressable instruments
Many grain-dryers models with different configurations and applications are encountered worldwide. Among those a thin-layer dryer makes it possible to perform detailed analysis of the drying process. With the results from this analysis results, the drying curves can be modeled and the deep bad grain drying process can be predicted. The thin layer grain dryer
Publicado em: 2006
-
9. Study and design of high speed D/A converter in CMOS tecnology. / Estudo e projeto de um conversor D/A de alta velocidade em tecnologia CMOS.
Neste trabalho é descrito o projeto e testes de um conversor digital/analógico de alta velocidade fabricado em tecnologia CMOS. O conversor pojetado possui resolução de 6 bits, trabalha em freqüência de 200 MSample/s, e foi fabricado na tecnologia CMOS de 0,35 µm da AMS (Austriamicrosystems), com quatro níveis de metal e 2 de silício policristalino.
Publicado em: 2005
-
10. Um modelo consistente para o processo de fotocontagem contínua e medidas de emaranhamento de sistemas quânticos de variáveis contínuas.
This dissertation embraces two trends of research in modern quantum optics. The first of them is connected to the photodetection theory, particularly to the continuous measurement theory developed by Srinivas and Davies (SD) in 1980s, whose principal ingredient is the correct choice of the quantum jump superoperator. We deduce from first principles diff
Publicado em: 2005
-
11. Proposta de um registrador ciclico para logica multi-valores e aplicação em um multiplicador quaternario / The cyclical register for MVL circuits (Multi-valued logic) and quaternary multiplier
The Cyclical Register for MVL circuits (Multi-valued Logic) proposed is composed by NMOS and PMOS Transistors. This circuit uses the advantage of certain secondary characteristics (normally undesirable) of the MOS transistors. One peculiarity of this register is that the logical levels are defined by itself with a very high precision ; this, permits to incre
Publicado em: 2005
-
12. Estudo eletromiografico do padrão de co-ativação do musculo esternocleidomastoideo em diferentes movimentos mandibulares
Although cervical muscles co-activation during jaw movements has been studied, this verification is stilllittle described in literature when are compared healthy subjects and patients with muscular dysfunction. The aim of this study was to verify by surface electromyography the bilateral co-activation of the sternocleidomastoid (SCM) muscle regarding to chew
Publicado em: 2002