Microhardness
Mostrando 1-12 de 531 artigos, teses e dissertações.
-
1. Effect of Welding Parameters on Nanostructured Fe-(C, B)-(Cr, Nb) Alloys
New nanostructured Fe-(Nb,Cr)-(C,B) multicomponent alloys have been developed for hardfacing application. They have better wear resistance than traditional Fe-Cr-C alloys. The nano-alpha-Fe, eutectic and hard carboborides phases of the weld metal usually show variations with the welding procedure. 6 test samples with different heat input were welded. It was
Mat. Res.. Publicado em: 20/01/2020
-
2. Towards Qualification of Friction Stir Welding to AA5083-O and AA5052-O Aluminum Alloys
Friction Stir Welding (FSW) is an excellent alternative for joining dissimilar and similar materials in comparison to conventional welding processes. In this sense, this work aims at qualifying FSW to similar AA5083-O and AA5052-O aluminum alloys, with 6.35 mm thickness, in a CNC machining center. Therefore, four welding experiments were undertaken. At first
Mat. Res.. Publicado em: 13/01/2020
-
3. Characterization and Comparative Analysis of Corrosion Resistance of 4 High Manganese Steels Models in Aqueous Solution of NaCl
The liquefied natural gas volumes that currently need to be stored and/or transported require engineering to consistently develop materials that combine high mechanical strength and low manufacturing costs. The present work brings the study of four models of high manganese steels (non-commercials), to demonstrate the feasibility of being used in the petroche
Mat. Res.. Publicado em: 09/12/2019
-
4. Analysis of Residual Stress by the Hole-Drilling Method and Hardness in Dissimilar Joints of Austenitic Stainless Steel AISI 316L and Inconel 718 Alloy by Autogenous GTAW Process
Stainless steel and nickel alloy have high corrosion resistance in high-temperature environments due to the high Cr content present in their chemical composition, being widely used in components of nuclear reactors, petrochemical industries, etc. Through proper processes and procedures, it becomes possible to join these alloys. However, this union can genera
Mat. Res.. Publicado em: 02/12/2019
-
5. Influence of cigarette smoke combined with different toothpastes on enamel erosion
Abstract: This in vitro study aimed to evaluate the effect of different toothpastes on dental enamel subjected to an erosive cycle with and without exposure to cigarette smoke. Bovine enamel specimens were randomly allocated into 12 groups (n = 12). For the in vitro simulation of smoking, half the groups underwent an exposure cycle of 20 cigarettes per day f
Braz. oral res.. Publicado em: 02/12/2019
-
6. Efeitos da Espessura da Fita Metálica no Metal de Solda Utilizando Cavacos de Titânio Como Componentes do Fluxo em Arames Tubulares para a Formação de TiC
Resumo Cavacos de titânio foram utilizados como componentes do fluxo em arames tubulares fabricados a partir da conformação e trefilação de fitas metálicas com espessuras diferentes. Os arames apresentaram diâmetros internos com dimensões diferentes afetando as taxas de preenchimento do fluxo. Para as mesmas condições de soldagem, os arames fabric
Soldag. insp.. Publicado em: 02/12/2019
-
7. Comparative effects of final canal irrigation with chitosan and EDTA
Abstract Chitosan is a natural, biocompatible chelating substance with potential for dental use. This study compared the effects of final canal irrigation with chitosan and EDTA on dentin microhardness, sealer dentin tubules penetration capacity, and push-out strength. Methodology: Fifty canine roots were distributed according to the final irrigation protoc
J. Appl. Oral Sci.. Publicado em: 28/11/2019
-
8. Efeitos do Processo de Refusão a Laser na Microestrutura e No Comportamento de Desgaste do Revestimento de WC Aspergido com HVOF
RESUMO O desgaste de componentes e equipamentos industriais e agrícolas representa um grande fator de depreciação de capital e de fonte de despesas com manutenção e reposição de componentes mecânicos. Como o desgaste é um fenômeno essencialmente superficial, envolvendo a remoção mecânica indesejável de material de superfícies, a solução estu
Matéria (Rio J.). Publicado em: 25/11/2019
-
9. Caracterização Mecânica e Análise Microestrutural de Chapas Obtidas pelo Processo de Tailor Welded Blank (TWB)
Resumo Um dos maiores desafios da indústria automobilística, a nível global, trata-se de desenvolver veículos que sejam, simultaneamente, leves e resistentes mecanicamente. O Tailor Welded Blank (TWB) surge como solução, pois é um processo que permite a soldagem de topo de chapas de diferentes especificações (material, espessura e/ou revestimento),
Soldag. insp.. Publicado em: 14/11/2019
-
10. Effect of immersion in various disinfectant solutions on the properties of a heat-cured acrylic resin
RESUMO Objetivo: Avaliar a influência da imersão em diferentes soluções desinfetantes na microdureza e rugosidade de uma resina acrílica de termoativação. Métodos: Corpos de prova de resina acrílica termopolimerizável foram imersos em água destilada, vinagre comercial de uso doméstico, hipoclorito de sódio e peróxido de hidrogênio, por perí
RGO, Rev. Gaúch. Odontol.. Publicado em: 28/10/2019
-
11. Efeito de diferentes soluções irrigadoras na microdureza superficial Knoop de dentes artificiais
Resumo Introdução Dentes artificiais têm sido empregados para a prática de ensino pré-clínico. Porém, não se sabe o comportamento dos mesmos frente aos diferentes procedimentos realizados durante um tratamento endodôntico simulado. Objetivo Avaliar a microdureza de réplicas de dentes humanos, frente a diferentes soluções irrigadoras. Material
Rev. odontol. UNESP. Publicado em: 24/10/2019
-
12. Influence of Molybdenum on Microstructure and Pitting Corrosion Behavior of Solution-Treated Duplex Stainless Steel in a Lithium Chloride Solution
With technological advances in the several areas of knowledge, the constant search for materials with characteristics that meet certain applications has been growing, especially in the chemical and petrochemical industries, where materials capable of withstanding the conditions of corrosion in aggressive environments are required. The aim of this paper was t
Mat. Res.. Publicado em: 24/10/2019