Ceramic
Mostrando 1-12 de 1090 artigos, teses e dissertações.
-
1. The influence of compositional variability of dimension stone residues on the properties of rustic porous ceramic tiles
Abstract This study analyzed how the compositional variability of dimension stone residues influences the characteristics of rustic porous ceramic tiles. The specimens were prepared by adding 20 wt% of dimension stone residue to the clay and sintered at 1000 °C for 1 h. The testing assays performed were physical properties and structural analysis through sc
Cerâmica. Publicado em: 2023
-
2. Bioactive SiO2-K2O-CaO-P2O5 glass-ceramic scaffold prepared using polyurethane foam template
Abstract A glass-ceramic in the SiO2-K2O-CaO-P2O5 quaternary system was prepared by substituting the Na2O component with K2O to avoid Na2Ca2Si3O9 formation upon thermal treatment since this phase decreases apatite formation kinetics on glass material. To form the glass-ceramic, a modified sol-gel method involving solution precipitation, followed by reagents
Cerâmica. Publicado em: 2023
-
3. Mullite macro-needles for reinforcement of refractory castables
Abstract Ceramic macro-needles incorporation as reinforcement in commercial refractory castable was studied. Ceramic macro-needles (Ø2x20 mm) were made from kaolinite clay and gibbsite to obtain mullite as the main crystalline phase. Specimens with the ceramic reinforcement were evaluated by compression after being treated at two temperatures (815 and 1400
Cerâmica. Publicado em: 2022
-
4. A review on the ceramic additive manufacturing technologies and availability of equipment and materials
Abstract Ceramic additive manufacturing allows the fabrication of small series of complex parts without the high costs of molds usually associated with traditional ceramic processing. Although research into ceramic 3D printing by all technologies started back in the 90s, its industrial application is still quite restricted when compared to polymers and metal
Cerâmica. Publicado em: 2022
-
5. Effects of plaster to water ratio on physical and mechanical properties of ceramic pieces produced by the slip casting process
Abstract In the slip casting process, the relationship between the amount of plaster and water used in the production of molds influences the production of ceramic materials, because the higher the water content in the mixture, the lower the mechanical strength of the mold and higher the water absorption rate. In order to evaluate the influence of the variat
Cerâmica. Publicado em: 2022
-
6. A review on the production of porous ceramics using organic and inorganic industrial waste
Abstract The use of industrial waste in compositions of ceramic masses has attracted great interest from the scientific community, as they can be considered abundant and diversified alternative sources of raw materials. At the same time, there is a growing interest in the development of porous ceramics due to their wide possibilities for use in various field
Cerâmica. Publicado em: 2022
-
7. Colorimetric analysis of dental porcelains: effects of the background color
Abstract This study evaluated how the background (white or gray) affects the color parameter measurements and color difference calculations (∆Eab and ∆E00) of dental ceramics. Disc-shaped feldspathic ceramic specimens were prepared with two shades (enamel and dentin) and stained in red wine (7-day immersion). A spectrophotometer was used to perform color
Cerâmica. Publicado em: 2022
-
8. Characteristics and utilization prospects of red ceramic waste in lightweight aggregates: a systematic review
Abstract Red ceramic waste (RCW) is one of the main by-products generated by the production of ceramic materials. Its application in lightweight aggregates (LWAs) has not yet been tested. Thus, this review intends to evaluate the perspectives of using RCW in the manufacture of LWAs. The search was carried out in the ScienceDirect database. 47 articles were s
Cerâmica. Publicado em: 2022
-
9. Development of a ceramic membrane for emulsion water-diesel treatment
Abstract The purpose of this study was the development of a low-cost ceramic tubular membrane, using inexpensive materials, namely natural clay, and graphite as a porogenic agent. Such a low-cost membrane can be used as filters or porous supports for the preparation of multilayer ceramic membranes. Extrusion was used as a shape-forming method for this purpos
Cerâmica. Publicado em: 2022
-
10. Properties and technical characteristics of Casira pottery, Jujuy, Argentina
Abstract In this work, the results of a multi-technique characterization of a type of pottery production with high cultural and economic relevance from the only potter town in Argentina are presented and correlated. Raw materials, a prepared paste, and ceramic samples were studied. Chemical, structural, textural, microstructural, and thermal features were as
Cerâmica. Publicado em: 2022
-
11. Analysis of dielectric and electrical transport properties of NdFeAsO ceramic
Abstract The iron-based ceramic NdFeAsO was synthesized by the solid-state reaction method. The tetragonal crystal structure was confirmed at room temperature through the X-ray diffraction technique. The dielectric characteristics i.e. dielectric constant (εr) and loss tangent (tanδ) of the sample were studied at a wide range of temperature and frequencies
Cerâmica. Publicado em: 2022
-
12. Methodology for evaluation of the influence of roughness and capillary absorption of ceramic blocks on the render’s tensile bond strength
Abstract The literature indicates that it is difficult or even impossible to associate with strong statistical confidence the bond strength of a mortar coating with the properties of the ceramic block, such as roughness and water absorption. In this work, it is assumed that the variability in capillary water absorption and roughness, and the use of methods t
Cerâmica. Publicado em: 2022