X Ray Fluorescence Analysis
Mostrando 13-24 de 195 artigos, teses e dissertações.
-
13. Residue-Based CaO Heterogeneous Catalysts from Crab and Mollusk Shells for FAME Production Via Transesterification
The production of fatty acid methyl esther (FAME) via transesterification was studied, assessing the influence of CaO heterogeneous catalysts obtained from four different fishery residues: sururu, crab, clam and mussel. Characterization and properties of the residues were obtained via thermogravimetric analysis, X-ray diffraction, X-ray fluorescence, Fourier
J. Braz. Chem. Soc.. Publicado em: 2020-04
-
14. Solvothermal Synthesis of Cerium-Doped Titania Nanostructured Materials Modified with Acetylacetone for Solar-Driven Photocatalysis
This study reports the preparation of nanostructured cerium-doped titanium dioxide photocatalysts containing different cerium concentrations by a modified sol-gel route involving the use of acetylacetone. The nanocrystalline powders had their structural, morphological, and optical properties characterized by X-ray diffraction, vibrational and Raman spectrosc
J. Braz. Chem. Soc.. Publicado em: 2020-01
-
15. Direct Analysis of Human Hair Before and After Cosmetic Modification Using a Recent Data Fusion Method
The cosmetic modification of hair is a very common procedure used to mask or cover evidence at a crime scene. Deoxyribonucleic acid (DNA) tests are expensive and require good-quality collection of samples and a database profile. To overcome these challenges, direct analysis was performed on a large set of hair strands collected from individuals, denoted orig
J. Braz. Chem. Soc.. Publicado em: 2020-01
-
16. Feasibility of a New Method for Identification and Discrimination of Gunshot Residues by Total Reflection X-Ray Fluorescence and Principal Component Analysis
This study aims at identifying and discriminating gunshot residue (GSR) from conventional ammunition of six different calibers by total reflection X-ray fluorescence (TXRF) and pattern recognition by principal component analysis (PCA). GSR samples were collected from hands of volunteer shooters with swabs moistened with deionized water and were extracted wit
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
17. Preparation and Luminescence Properties of Europium(III) Ternary Complex-modified Poplar Wood-based Materials
Inspired by the ultraviolet induced properties of biological materials, we developed fluorescent wood as a new type of functional material which can be applied to anti-counterfeit label technology and wood-emitting artwork. This study discusses the influence of temperature, time, ligand ratio, and reactant concentration on the structure and properties of flu
Mat. Res.. Publicado em: 23/09/2019
-
18. Influence of reactivity and mineralogical composition on instability due to the disintegration of shales from Paraíba and Ceará States, Brazil
Resumo Este trabalho teve como objetivo correlacionar a reatividade e composição mineralógica de folhelhos à sua desintegração. Para tanto, foram caracterizadas cinco amostras de folhelho das Bacias do Rio do Peixe e Araripe, localizadas nos estados brasileiros da Paraíba e Ceará e, para fins de comparação, foi utilizada uma amostra de argila bento
Cerâmica. Publicado em: 15/08/2019
-
19. CHARACTERIZATION OF SILICON-ALUMINUM-ZIRCONIUM OXIDE OBTAINED BY THE SOL-GEL PROCESS
A new silicon-aluminum-zirconium ternary oxide (SiO2/Al2O3/ZrO2) was prepared by the sol-gel method followed by one-step washing with absolute ethanol or two-step washing with absolute ethanol followed by ultra-pure water. Both ternary oxides presented high surface area (over 340 m2 g-1). The binding energy values for Zr3d and Al2p levels showed the insertio
Quím. Nova. Publicado em: 18/07/2019
-
20. Caracterização de argilas de novos jazimentos situados em Parelhas/RN, Brasil, visando aplicação na indústria cerâmica
RESUMO O Estado do Rio Grande do Norte, mais especificamente no município de Parelhas, Brasil, a indústria cerâmica já é bastante consolidada, crescendo ano após ano. Entretanto, o estímulo do setor tem provocado acelerada exaustão das jazidas de argilas locais utilizadas pela indústria e, por conseguinte, ameaçando a manutenção da indústria cer
Matéria (Rio J.). Publicado em: 10/06/2019
-
21. Characterization of Algerian kaolins for utilization as a raw material in electrical insulators
Resumo O objetivo desta investigação foi caracterizar três amostras de caulim (DD1, DD2 e DD3) coletadas do depósito de Djebel Debbagh (leste da Argélia) para serem utilizadas em isoladores elétricos de porcelana. Análise granulométrica, fluorescência de raios X, difração de raios X, microscopia eletrônica de varredura e análise térmica (TG-ATD
Cerâmica. Publicado em: 06/06/2019
-
22. CHARACTERIZATION OF SEVERAL GENERATIONS OF NiMo HYDROPROCESSING CATALYSTS EMPLOYED IN THE SAME HYDROTREATER
This work details the chemical characterization of four NiMo/Al2O3 hydroprocessing generation catalysts (1979-1986, 1993-1998, 2003-2008 and 2008-2011) employed to perform hydrodesulfurization (HDS) of diesel fractions in the same hydrotreater of a Brazilian refinery. The basic differences are the quality of the feedstocks and the HDS experimental conditions
Quím. Nova. Publicado em: 27/05/2019
-
23. Elemental concentration via portable x-ray fluorescence spectrometry: Assessing the impact of water content
RESUMO A fluorescência de raios-X portátil (pXRF) pode ser considerada como um dos principais avanços para a caracterização química de diferentes materiais. A umidade das amostras pode afetar o desempenho dessa análise. Assim, foi realizado um ensaio para verificar o efeito da umidade na concentração elementar obtida via pXRF. Como inovação, objet
Ciênc. agrotec.. Publicado em: 27/05/2019
-
24. Peças Cerâmicas fabricadas usando pó de granito com adição dos produtos da combustão do carvão mineral: Caracterização Mecânica
RESUMO Foi estudada a viabilidade técnica da utilização de resíduos de granito como matéria prima na fabricação de corpos de prova cerâmicos, com adições dos Produtos da Combustão do Carvão Mineral (PCC’s) como fase reforço. Os materiais utilizados foram granito Asa Branca (RGAB) e os Produtos da Combustão do Carvão mineral (PCC´s), nas con
Matéria (Rio J.). Publicado em: 20/05/2019