Wood Properties
Mostrando 13-24 de 302 artigos, teses e dissertações.
-
13. PHYSICAL AND THERMAL PROPERTIES OF EUCALYPTUS WOOD CHARCOAL.
ABSTRACT The knowledge of the physical and thermal properties of eucalyptus charcoal is of fundamental importance in the design of equipment and development of cooling technologies. However, literature about physical properties for eucalyptus wood charcoal is largely unavailable, especially the thermal and aerodynamic properties, for the same material. The a
CERNE. Publicado em: 2020-03
-
14. APPARENT DENSITY AS AN ESTIMATOR OF WOOD PROPERTIES OBTAINED IN TESTS WHERE FAILURE IS FRAGILE
ABSTRACT The use of new wood species in construction requires knowledge of their properties for safer and more economical structural sizing. In Brazil, structural projects are carried out according to the standard document ABNT NBR 7190:1997. Tests required by this standard for the complete characterization of species require large machines with high costs,
Eng. Agríc.. Publicado em: 2020-02
-
15. Influence of treatment with water-soluble CCB preservative on the physical-mechanical properties of brazilian tropical timber
This aim of this work is to present an analysis of the influence of impregnation against biological demand, realized with saline solution of CCB (Chromated Copper Borate preservative) by vacuum-pressure process, on physical-mechanical properties of tropical wood species Simarouba sp., Cedrelinga catenaeformis and Erisma uncinatum Warm. In theory, such proces
Mat. Res.. Publicado em: 13/01/2020
-
16. Number of laminae on the mechanical behavior of glued laminated timber (glulam) of Toona ciliata produced with vegetable polyurethane adhesive
RESUMO A madeira laminada colada (MLC) é um material compósito obtido a partir da colagem de lâminas de madeira dispostas com as fibras paralelas entre si. O objetivo deste trabalho foi avaliar a influência do número de lâminas no comportamento mecânico de MLC de Toona ciliata produzidas com adesivo poliuretano de base vegetal. As vigas de MLC foram p
Ciênc. agrotec.. Publicado em: 20/12/2019
-
17. EVALUATION OF THE Peltophorum vogelianum Benth. WOOD SPECIES FOR STRUCTURAL USE
ABSTRACT Wood is a material used for various purposes since ancient times and is mainly used in civil and rural construction and industry. Due to the predatory exploitation of known trees, it is necessary to characterize new species for use in urban and rural structures as alternatives of species commonly used. This study aimed to determine the physical and
Eng. Agríc.. Publicado em: 09/12/2019
-
18. Influência de aditivos químicos na produção de compósitos madeira-cimento de duas espécies tropicais da Amazônia
Resumo Este trabalho teve como objetivo avaliar o potencial de uso de três diferentes aditivos químicos (CaCl2, MgCl2 e cal hidratada) na produção de compósitos madeira-cimento manufaturados com a mistura de partículas de madeira de costaneira de piãozinho (Eschweilera coriaceae (DC.) Mart) e matá-mata-branco (Eschweilera odora (poepp.) Miers) e cime
Ciênc. Florest.. Publicado em: 02/12/2019
-
19. INFLUENCE OF TIME AND HEAT TREATMENT TEMPERATURE ON PERMEABILITY OF Eucalyptus grandis WOOD
RESUMO Devido ao fato de a madeira in natura possuir características de permeabilidade inadequadas para algumas aplicações, diversas técnicas de processamento foram desenvolvidas, como tratamentos hidrotérmicos e congelamento, que visam melhorar essas propriedades. O objetivo deste estudo foi analisar os efeitos do tempo e da temperatura de tratamento n
Rev. Árvore. Publicado em: 07/10/2019
-
20. Quality of Wood and Charcoal from Eucalyptus Clones for Metallurgical Use
ABSTRACT The objectives of the present work were to determine the properties of wood and charcoal from Eucalyptus clones and assess impacts of charcoal features on the CO2 gasification reactivity and to compare with coke reactivity. Gasification reactivity was performed using charcoal particles in a furnace setup at 820 °C, under CO2 atmosphere. The results
Floresta Ambient.. Publicado em: 03/10/2019
-
21. Influência da composição granulométrica das partículas de resíduos de madeira nas propriedades de compósitos minerais: parte 2: gesso-madeira
Resumo Resíduos de construção e demolição (RCD) de madeira podem ser incorporados em compósitos de fibras naturais, reduzindo os impactos ambientais, o que contribui para o desenvolvimento de materiais, produtos e processos mais sustentáveis. Nesse sentido, o objetivo deste estudo foi avaliar a influência da composição granulométrica das partícul
Ambient. constr.. Publicado em: 03/10/2019
-
22. Painéis de pínus e bagaço de cana empregando-se dois adesivos para uso na construção civil
Resumo O presente trabalho objetivou produzir e avaliar painéis aglomerados empregando-se partículas de bagaço de cana-de-açúcar (Saccharum officinarum) e de pínus (Pinus taeda, Pinus elliottii), comparando-se a eficiência de dois adesivos, ureia-formaldeído e poliuretano derivado do óleo de mamona. Os painéis foram preparados com 60% de partícula
Ambient. constr.. Publicado em: 03/10/2019
-
23. Preparation and Luminescence Properties of Europium(III) Ternary Complex-modified Poplar Wood-based Materials
Inspired by the ultraviolet induced properties of biological materials, we developed fluorescent wood as a new type of functional material which can be applied to anti-counterfeit label technology and wood-emitting artwork. This study discusses the influence of temperature, time, ligand ratio, and reactant concentration on the structure and properties of flu
Mat. Res.. Publicado em: 23/09/2019
-
24. Do the Growing Conditions of Trees Influence the Wood Properties?
ABSTRACT Currently, there is a little and sparse information about how the growing conditions influence the spatial variation of wood along the stem. Thus, the aim of this study was to compile the knowledge from literature in a manuscript for better understanding to what extent the growing conditions influence the spatial variation of wood properties in Euca
Floresta Ambient.. Publicado em: 16/09/2019