INFLUENCE OF TIME AND HEAT TREATMENT TEMPERATURE ON PERMEABILITY OF Eucalyptus grandis WOOD

AUTOR(ES)
FONTE

Rev. Árvore

DATA DE PUBLICAÇÃO

07/10/2019

RESUMO

RESUMO Devido ao fato de a madeira in natura possuir características de permeabilidade inadequadas para algumas aplicações, diversas técnicas de processamento foram desenvolvidas, como tratamentos hidrotérmicos e congelamento, que visam melhorar essas propriedades. O objetivo deste estudo foi analisar os efeitos do tempo e da temperatura de tratamento na permeabilidade da madeira de Eucalyptus grandis. Foram utilizados amostras da região do cerne de três árvores de E. grandis, cada uma com as dimensões 30 x 8 x 3 (comprimento, largura, espessura). Os tratamentos foram realizados a três temperaturas (-20, 60 e 100 °C) e três tempos de exposição (5, 10 e 15 horas). Os tratamentos à -20 °C foram realizadas dentro de um freezer doméstico, enquanto os tratamentos à 60 e 100 °C em um reator Parr, onde as madeiras ficaram submersas em água. Foi observado a remoção dos extrativos apenas na superfície e interior de madeira tratada a 60 e 100 ° C; enquanto a permeabilidade aumentou para todas as condições de tratamento quando comparados à testemunha.ABSTRACT Due to the fact that raw timber has permeability characteristics unsuitable for some applications, several processing techniques have been developed, such as hydrothermal treatments and freezing, which aim to improve these properties. The objective of this study was to analyze the effects of treatment temperature and duration on the permeability of Eucalyptus grandis wood. Heartwood samples from three E. grandis trees were utilized, each with the dimensions 30 x 8 x 3 (length, width, thickness). The treatments were carried out at three temperatures (-20°C, 60°C, and 100°C) and three exposure durations (5, 10, and 15 hours). Treatments at -20°C were conducted inside a domestic freezer, while treatments at 60°C and 100°C took place inside a Parr Reactor, while the wood being submerged in water. Extractive removal was only observed at the surface and interior of wood treated at 60°C and 100°C; while all treatment conditions increased permeability with respect to control treatments.

Documentos Relacionados