Wood Physical Properties Mechanical Properties
Mostrando 1-12 de 96 artigos, teses e dissertações.
-
1. Evaluation of moisture content variation on strength and stiffness properties of Cedrella sp. wood specie
Abstract In order to evaluate the influence of moisture content on wood physical and mechanical properties, the present research analyzed the influence of moisture content variation on Cedrella sp. on 12 strength and stiffness properties, considering 12% moisture content up to Fiber Saturation Point (FSP) were considered. Brazilian Standard consider a correc
REM - International Engineering Journal. Publicado em: 2022
-
2. USE OF RESIDUES FROM THE CELLULOSE INDUSTRY AND SUGARCANE BAGASSE IN PARTICLEBOARDS
ABSTRACT The use of alternative materials such as lignocellulosic residues in the production of particleboards has increased considering that these residues are produced in large volumes and often do not have an appropriate destination. This research studied the use of residues from cellulose industries, sugarcane bagasse, and castor oil-based polyurethane r
Eng. Agríc.. Publicado em: 2021-02
-
3. MECHANICAL AND PHYSICAL PROPERTIES OF WOOD/POLYETHYLENE COMPOSITE REINFORCED WITH TIO2 NANOPARTICLES
ABSTRACT Wood plastic composite was fabricated using high density polyethylene and pine wood fiber. The effect of addition of TiO2 nanoparticles at different weight fractions (0%, 1%, 3%, and 5%) on some properties of the composite was examined. The experimental composites were tested for bending strength, tensile strength, Izod impact strength, thickness sw
CERNE. Publicado em: 2020-12
-
4. BEHAVIOR OF THERMALLY MODIFIED WOOD TO BIODETERIORATION BY XYLOPHAGE FUNGI
ABSTRACT Thermally modified wood undergoes chemical, physical, and mechanical modifications, resulting in changes in resistance to wood biodegrading agents. The objective of this study was to evaluate the resistance to biodeterioration of thermally modified wood by the industrial process VAP HolzSysteme® of Eucalyptus grandis, Pinus taeda and Tectona grandi
CERNE. Publicado em: 2020-09
-
5. PHYSICAL AND MECHANICAL PROPERTIES OF PARTICLEBOARD FROM Eucalyptus grandis PRODUCED BY UREA FORMALDEHYDE RESIN WITH SiO2 NANOPARTICLES
ABSTRACT The use of nanoparticles appears to be a feasible option for improving the quality of a range of wood-based products. Studies show that they can improve both the physical and mechanical properties of wood and wood-based products. This preliminary study aimed to analyze the influence of SiO2 nanoparticles on the physical and mechanical properties of
Eng. Agríc.. Publicado em: 2020-06
-
6. Influence of treatment with water-soluble CCB preservative on the physical-mechanical properties of brazilian tropical timber
This aim of this work is to present an analysis of the influence of impregnation against biological demand, realized with saline solution of CCB (Chromated Copper Borate preservative) by vacuum-pressure process, on physical-mechanical properties of tropical wood species Simarouba sp., Cedrelinga catenaeformis and Erisma uncinatum Warm. In theory, such proces
Mat. Res.. Publicado em: 13/01/2020
-
7. EVALUATION OF THE Peltophorum vogelianum Benth. WOOD SPECIES FOR STRUCTURAL USE
ABSTRACT Wood is a material used for various purposes since ancient times and is mainly used in civil and rural construction and industry. Due to the predatory exploitation of known trees, it is necessary to characterize new species for use in urban and rural structures as alternatives of species commonly used. This study aimed to determine the physical and
Eng. Agríc.. Publicado em: 09/12/2019
-
8. Influência da composição granulométrica das partículas de resíduos de madeira nas propriedades de compósitos minerais: parte 2: gesso-madeira
Resumo Resíduos de construção e demolição (RCD) de madeira podem ser incorporados em compósitos de fibras naturais, reduzindo os impactos ambientais, o que contribui para o desenvolvimento de materiais, produtos e processos mais sustentáveis. Nesse sentido, o objetivo deste estudo foi avaliar a influência da composição granulométrica das partícul
Ambient. constr.. Publicado em: 03/10/2019
-
9. Painéis de pínus e bagaço de cana empregando-se dois adesivos para uso na construção civil
Resumo O presente trabalho objetivou produzir e avaliar painéis aglomerados empregando-se partículas de bagaço de cana-de-açúcar (Saccharum officinarum) e de pínus (Pinus taeda, Pinus elliottii), comparando-se a eficiência de dois adesivos, ureia-formaldeído e poliuretano derivado do óleo de mamona. Os painéis foram preparados com 60% de partícula
Ambient. constr.. Publicado em: 03/10/2019
-
10. Wood basic density effect of Eucalyptus grandis in the paper making
ABSTRACT The basic density is the main technical property of the wood due to the fact of the easy determination and correlation with the others wood properties. In this article, it was evaluated wood chips from a five-years-old Eucalyptus grandis in three different silvicultural treatments for pulp and paper production. First, a conventional kraft pulping wa
Matéria (Rio J.). Publicado em: 16/09/2019
-
11. Efeito da furfurilação em propriedades físicas e mecânicas da madeira de Pinus elliottii
RESUMO As madeiras de Pinus apresentam características indesejáveis às quais podem ser atenuadas com a aplicação de tratamentos, no qual é destacado a furfurilação. Sendo assim, o objetivo deste trabalho foi avaliar o efeito da impregnação de álcool furfurílico nas propriedades físicas e mecânicas da madeira de Pinus elliottii. Para tanto, fora
Matéria (Rio J.). Publicado em: 16/09/2019
-
12. Physical-mechanical Properties of Plywood Produced With Acrocarpus fraxinifolius and Pinus oocarpa
ABSTRACT The present study has the objective of evaluating the physical-mechanical properties of plywood produced with Acrocarpus fraxinifolius wood, as well as the effect of combining their veneer with Pinus veneer. The wood of Acrocarpus fraxinifolius and Pinus oocarpa were used in the production of the panels. The plywood was produced with five veneers; t
Floresta Ambient.. Publicado em: 05/09/2019