Efeito da furfurilação em propriedades físicas e mecânicas da madeira de Pinus elliottii

AUTOR(ES)
FONTE

Matéria (Rio J.)

DATA DE PUBLICAÇÃO

16/09/2019

RESUMO

RESUMO As madeiras de Pinus apresentam características indesejáveis às quais podem ser atenuadas com a aplicação de tratamentos, no qual é destacado a furfurilação. Sendo assim, o objetivo deste trabalho foi avaliar o efeito da impregnação de álcool furfurílico nas propriedades físicas e mecânicas da madeira de Pinus elliottii. Para tanto, foram utilizados 4 tratamentos: controle e com diferentes cargas de álcool furfurílico (10%, 25% e 50%). Determinaram-se às propriedades tecnológicas conforme descrito nas normas ASTM D 2395-17 (2017) e ASTM D 143-94 (2014). Verificou-se que para as propriedades mecânicas, a resistência à compressão paralela às fibras, em que o parâmetro MOE teve um acréscimo significativo para todos os tratamentos em relação ao grupo controle, em destaque especial para o tratamento (TF25%), para o MOR obteve-se valores superiores, porém sem diferenças significativas. Em relação a dureza Janka, a tensão máxima no plano anatômico transversal, constatou-se valores superiores se comparados ao controle, com destaque o tratamento (TF50%), o qual demonstrou maiores valores com diferença significativa. Para o plano tangencial não foram constatadas diferenças significativas, se mantendo praticamente constantes os valores médios entre os tratamentos e o controle. Para flexão estática, MOR e MOE, não se observaram diferenças significativas, sendo essas propriedades analisadas com testes ANOVA com significância de 5%. Com isso pode-se concluir que a impregnação com álcool furfurílico foi eficaz, devido às melhorias de desempenho mecânico observado. Visto o potencial da furfurilação empregada na madeira com base nestes resultados, sugere-se mais pesquisar neste campo de modo a fomentar maiores informações sobre a utilização deste tratamento em madeira.ABSTRACT Pinus wood presents undesirable characteristics that can be attenuated with the application of treatments, in which the furfurylation is highlighted. Therefore, the objective of this work was to evaluate the effect of impregnation of furfuryl alcohol on the physical and mechanical properties of Pinus elliottii wood. For this, 4 treatments were used: control and with different loads of furfuryl alcohol (10%, 25% and 50%). The properties were determined as described in ASTM D 2395-17 (2017) and ASTM D 143-94 (2014). It was verified that, for the mechanical properties, the compression resistance parallel to the fibers, in which the MOE parameter had a significant increase for all the treatments in relation to the control group, especially for treatment (TF25%), for the MOR, higher values were obtained, but without significant differences. Regarding Janka hardness, the maximum tension in the transverse anatomical plane, higher values were observed when compared to the control, with emphasis on treatment (TF50%), which showed higher values with significant difference. For the tangential plane, no significant differences were observed, maintaining the average values between the treatments and the control practically constant. For static flexion, MOR and MOE, no significant differences were observed, these properties being analyzed with ANOVA tests with significance of 5%. With this it can be concluded that the impregnation with furfuryl alcohol was effective, due to improvements in mechanical de-performance observed. Considering the potential of furfurylation employed in wood based on these results, it is suggested to do more research in this field in order to promote more information on the use of this wood treatment.

Documentos Relacionados