Welding Parameters
Mostrando 37-48 de 119 artigos, teses e dissertações.
-
37. Microstructure and Abrasion Resistance of Fe-Cr-C and Fe-Cr-C-Nb Hardfacing Alloys Deposited by S-FCAW and Cold Solid Wires
Abstract This work assesses the wear resistance behavior of different high Cr and Nb alloyed hardfacing deposits carried out by Self-shielded Flux Cored Arc Welding, considering the resulting microstructures as base for the analysis. To obtain non-commercial alloys, an “in-situ” technique was employed with addition of cold wire into the weld pool. Six co
Soldag. insp.. Publicado em: 2016-09
-
38. Evolución Microestructural en Uniones de la Aleación Ti-6Al-4V Mediante el Proceso de Soldadura de Punto por Fricción-agitación
Abstract Friction stir spot welding (FSSW) is a process of recent development and interest, mainly in titanium alloys, since there are previous studies of aluminum alloys, magnesium, steel and polymers. Titanium alloys have a wide range of applications in the aeronautical industry, mainly in the components of commercial aircrafts as landing gear. Therefore,
Soldag. insp.. Publicado em: 2016-06
-
39. Comportamiento Tribológico y Microestructural en Recubrimientos Aplicados por GTAW y HVOF (Proceso Térmico de Espreado) y Usado en Recuperación de Aceros Grado Herramienta AISI/SAE D2
Abstract The Fe-Cr-Mo alloys are use in covers to protect the components that are under wear and corrosion. The high velocity thermo spray covering by HVOF (high velocity oxi-fuel) in Fe-Cr-Mo alloys has reported as a good result in projection fields for the steel tool grade for cold work. The HOVF is an attractive method to apply covering and recuperate dia
Soldag. insp.. Publicado em: 2016-06
-
40. Friction Stir Welding of Shipbuilding Steel with Primer
Abstract Friction Stir Welding has proven its merits for welding of aluminium alloys and is focused in expanding its material database to steel and titanium and also to assess new joint configurations. The use of welded structures in shipbuilding industry has a long tradition and continuously seeks for innovation in terms of materials and processes maintaini
Soldag. insp.. Publicado em: 2016-03
-
41. Fully Automatic Spot Welding System for Application in Automotive Industry
Abstract A Virtual Machine has led to a fully automatic spot welding system. All necessary parameters are created by measuring systems and algorithms running in the Virtual Machine. A hybrid operating circuit allows the Virtual Machine to read the exact process voltage between the tips of the electrodes every 50 µs. Actual welding voltage and current allow
Soldag. insp.. Publicado em: 2015-12
-
42. Optimización de los Parámetros de Soldadura por Arco Sumergido en Acero HSLA: una Aplicación para Manufactura de Tuberías de Conducción de Hidrocarburos
Abstract The HSLA steel API 5L X70 is used to manufacture pipes for transporting hydrocarbons. The construction of pipe of this material involves high amount of welding, where the parameters used affect directly in the metallurgical structure and in the mechanical properties thereof when welded. Thus, to study the impact of the parameters of the submerged ar
Soldag. insp.. Publicado em: 2015-12
-
43. Comparison Between the Heating Rates of a Magnetic Induction Soldering Iron and Another One Composed of Resistance
AbstractIn this work an experimental and comparative analysis is realized in order to determine the difference in the heating rate and thus the power consumption, between a magnetic induction soldering iron and another one of low cost composed of electric resistance. By maintaining a constant power supply 40 W, three models of comercial tips designed for the
Soldag. insp.. Publicado em: 2015-06
-
44. Effect of heat treatment on hardness and wear behavior of weld deposited Co-Cr-Mo alloy
Metallic materials are generally characterized by the evaluation of hardness and wear resistance of the material at the specified condition. The characterization is necessary for understanding the behavior of the metals, especially alloys, at different conditions. To study the effect of heat treatment on weld deposited Co-Cr-Mo alloy, arc welding process has
Matéria (Rio J.). Publicado em: 2015-06
-
45. Microstructural Transformations in Dissimilar Welds between Austenitic Stainless Steel and Ferritic Stainless Steel
This research studies the metallurgical transformations taking place the SMAW welding of AISI 316L austenitic stainless steel with AISI 430 ferritic stainless steel. To perform the study were used two different electrodes, AWS E309L austenitic and AWS E2209-16 duplex stainless steels 3.2 mm diameter. The joints were made with a single-pass welding including
Soldag. insp.. Publicado em: 2015-03
-
46. Efecto del procedimiento de soldadura por FSW en la evolución temporal de las propiedades en uniones de AA 7075-T651
It was studied the effect of the welding procedure on the temporal evolution of the mechanical properties in AA 7075-T651 friction stir welded joints. To vary the heat input samples with different parameters (rotation and welding speed) were welded. Thermal cycles were acquired by means of thermocouples instrumented on the samples, obtaining the heat input f
Soldag. insp.. Publicado em: 2014-12
-
47. Efecto de los parámetros de soldadura sobre la microestructura de recargues nanoestructurados base hierro depositados por FCAW-S
Lately modern hardfacing tubular wires for semiautomatic welding with gas protection and without it have been developed. These wires deposit Fe-based nanostructured alloys with high abrasive wear resistance. The information on these new consumables is scarce, especially about the effect that the welding parameters (heat input, shielding gas, arc voltage, cur
Soldag. insp.. Publicado em: 2014-12
-
48. Prediction of Friction Stir Welding defect-free joints of AISI 304 austenitic stainless steel through axial force profile understanding
Friction Stir Welding (FSW) joints of AISI 304 austenitic stainless steel (304 SS) using position controlled mode were investigated in order to understand and relate axial force behavior to welding quality. Joints were produced using two tools and four combinations of specific parameters. The results showed coherence between the axial force profiles and the
Mat. Res.. Publicado em: 2014-10