Welding Parameters
Mostrando 13-24 de 119 artigos, teses e dissertações.
-
13. Influência da composição do gás de proteção nas tensões residuais de juntas de aço DP600 soldadas pelo processo GMAW
RESUMO A indústria automobilística vem investindo em novos processos de fabricação que melhoram a produtividade sem perda da qualidade. Entretanto, a presença de tensões residuais, geradas em todos os processos de fabricação, constitui um dos grandes problemas encontrados na indústria metal mecânica, pois estas podem se somar às tensões de carreg
Matéria (Rio J.). Publicado em: 20/05/2019
-
14. Estudo dos Parâmetros de União por Difusão do Aço Inoxidável AISI 316L
Resumo A união por difusão é uma técnica de união no estado sólido capaz de ligar dois materiais metálicos por meio da difusão atômica na interface de contato, sem o uso de metal de adição. Este processo é adequado para a união de grandes áreas com uma alta resistência mecânica, permitindo ao equipamento operar com elevadas pressões de traba
Soldag. insp.. Publicado em: 16/05/2019
-
15. A New methodology of Nondestructive Testing for Quantitative Evaluation of Sigma Phase in Duplex Stainless Steels
Duplex Stainless Steels (DSSs) are widely used in the oil and gas industry. When the steel is subjected to a thermal gradient, as in welding may occur precipitation of intermetallic phases. Among these phases, there is the sigma phase, which even in small quantities reduces drastically the mechanical and corrosion resistance properties. According to some stu
Mat. Res.. Publicado em: 13/05/2019
-
16. Uma Metodologia para Análise da Distribuição de Contagem dos Picos de Tensão de Reignição para Avaliação da Estabilidade do Processo GMAW Curto-Circuito
Resumo A estabilidade do arco tem sido estudada através de análises estatísticas obtidas dos sinais de tensão de arco e corrente de soldagem. Histogramas e cálculo de estatísticas dos parâmetros tempo de arco aberto e tempo de curto circuito são meios de avaliação da estabilidade dos processos de soldagem. Contudo, estudos relacionados aos picos de
Soldag. insp.. Publicado em: 09/05/2019
-
17. Investigation on the Wear Properties of Ti/TiC/TiN Composite Coatings Prepared by Powder Cored Wires Through TIG Method at Nitrogen Atmosphere on Titanium Substrate
In this present study, Tungsten Inert Gas (TIG) welding and powder filled cored wires with nitrogen shielding gas were utilized to produce TiC and TiN surface composite coatings on the titanium (Ti) sheet substrate. The TIG procedure was done at same welding parameters for all of prepared samples. Phase analysis and microstructures were done by X-ray Diffrac
Mat. Res.. Publicado em: 15/04/2019
-
18. Optimization of Multiple Performance Characteristics of Friction Stir Welded Joint with Grey Relational Analysis
In the present work, multi-objective optimization of the input welding parameters influencing the quality of weld joint of AA 5052 H32 aluminium alloy by FSW process is investigated using response surface methodology and grey relational analysis. The quality of the welded joint is measured based on the higher value of tensile strength and hardness of the joi
Mat. Res.. Publicado em: 08/11/2018
-
19. Submerged Friction Stir Welding of 6061-T6 Aluminium Alloy under Different Water Heads
The aim of this paper is to determine the feasibility of submerged friction stir welding of 6061-T6 aluminium alloy on different water heads through macrostructuralanalysis.In this work, aluminium 6061-T6 alloy was friction stir welded under normal and submerged conditions at different rotational speeds of 400 rpm, 800 rpm, 1200 rpm, 1600 rpm. The water head
Mat. Res.. Publicado em: 01/11/2018
-
20. Optimización del proceso RSW para acero DP 1000
ABSTRACT In recent times new materials have been introduced in automobiles construction in order to reduce their weight and consequently fuel consumption and emissions level. Among them are Dual Phase (DP) steels, constituted by a ferritic matrix with martensite islands. Resistance Spot Welding (RSW) is the most commonly used welding process in the automotiv
Matéria (Rio J.). Publicado em: 19/07/2018
-
21. Estudio de propiedades mecánicas locales de uniones soldadas por fricción agitación (FSW) en AA6061-T6 mediante Small Punch Test (SPT)
ABSTRACT Friction Stir Welding (FSW) is a solid state process that has reach a strong technological impact in welding of aluminum alloys. Among its advantages, it may include the ability of joining materials that are difficult to weld by fusion. In welding of heat treatable aluminum alloys, some degradation in metallurgical properties is observed, so welds s
Matéria (Rio J.). Publicado em: 19/07/2018
-
22. Efecto de los parámetros de soldadura en mallas de acero electrosoldadas
ABSTRACT Reinforced concrete is the most widely used material in construction industry. Generally concrete is reinforced with ribbed bars. In certain applications, it is desirable to use welded mesh and are used in most reinforced concrete structures (buildings, roads, tunnels and prefabricated components). Welded mesh are generally electrowelded (PW: Projec
Matéria (Rio J.). Publicado em: 19/07/2018
-
23. Efecto del tiempo de superpulso de soldadura sobre la evolución microestructural de un acero de bajo carbono
ABSTRACT The Super Pulse arc type was developed to provide a solution to butt root pass beads in the semi-automatic welding process with gas protection (GMAW). Unlike standard pulse welding, the Super Pulse uses a sequence of different pulse waveforms to create a cord shape and appearance similar to the GTAW process. It uses higher amperage in the primary ph
Matéria (Rio J.). Publicado em: 19/07/2018
-
24. Effect of Residual Stresses of GTA Welding for Dissimilar Materials
The purpose of the present work is to understand the evolution of residual stresses in weldments. The study made to weld the multipass dissimilar of Nickel-based superalloy Inconel 625 and stainless steel 316L using Continuous Current Gas Tungsten Arc Welding (CCGTAW) and Pulsed Current Gas Tungsten Arc Welding (PCGTAW) process employing ERNiCrMo-3 and ERNiC
Mat. Res.. Publicado em: 25/06/2018