Weldability
Mostrando 1-12 de 33 artigos, teses e dissertações.
-
1. Análisis comparativo en la determinación de ferrita delta para aceros inoxidables austeníticos
ABSTRACT In the welding of austenitic stainless steels, the determination of delta ferrite (δ-ferrite) is very important to assess the susceptibility of weld metal to hot cracking, one of the major problems related to weldability, metallurgical and mechanical behavior of this type of steels. The determining δ-ferrite in the weld metal can be performed with
Matéria (Rio J.). Publicado em: 19/07/2018
-
2. Vida a fatiga de uniones soldadas mediante PAW de aceros microaleados al boro
ABSTRACT In the last years microalloyed boron steels have been adopted in the automotive industry to achieve weight reductions. Namely, they are used as load-bearing elements such as pillars and reinforcements, in a quenched and tempered (QT) condition with tensile strength ranging from 800 to 1300 MPa. Dual-Phase (DP) steels have also been introduced in thi
Matéria (Rio J.). Publicado em: 19/07/2018
-
3. Obtención de aceros de baja aleación con diferentes contenidos de Ni y similares microestructuras y propiedades mecánicas
ABSTRACT Low alloy steels are used in many applications in the oil and gas industry. The addition of Ni in these steels improves their low temperature fracture toughness and hardenability, with a low penalty on weldability. However, ISO 15156-2 standard restricts Ni content up to a 1 wt% limit, requiring additional and expensive tests if higher Ni steels are
Matéria (Rio J.). Publicado em: 19/07/2018
-
4. Estudio de la microestructura de un cordón de soldadura de un acero P91 mediante microscopía electrónica de transmisión
ABSTRACT In the present work the microstructural characterization of a single-pass weld of 9Cr1MoVNb P91 steel performed by the flux-cored arc welding (FCAW) process in the “as welding” condition has been carried out by means of transmission electron microscopy. P91 steel offers a good weldability, but the mechanical properties of the welded joints are f
Matéria (Rio J.). Publicado em: 19/07/2018
-
5. Comportamiento frente a la corrosión de uniones soldadas por fricción agitación de AA7075-T651: Evaluación galvánica
ABSTRACT Friction Stir Welding (FSW) is a novel solid-phase welding process, which has proved to have a great potential for the realization of welded joints in materials with poor weldability such as heat-treatable aluminum alloys. The aerospace industry has incorporated this process for the manufacture of structural elements, using known high strength alloy
Matéria (Rio J.). Publicado em: 19/07/2018
-
6. Microstructure and Mechanical Properties of ASTM A743 CA6NM Steel Welded by FCAW Process
CA6NM steel is widely used in the manufacture of hydraulic turbines metallic parts, due to its resistance to corrosion and cavitation damage, combined with good weldability and fatigue properties. However, welding of this type of steel is complex and to ensure a minimum residual stress after welding it is necessary perform a post welding heat treatment (PWHT
Mat. Res.. Publicado em: 21/09/2017
-
7. Weldability Study of LM25/ZrO2 Composites by Using Friction Welding
ABSTRACT In this paper aluminum (LM25) alloy was chosen as a base matrix metal, and it was reinforced with 0, 3, 6, 9, 12% of Zirconium dioxide (ZrO2) particulates based on weight fraction method. Stir casting method was used to cast LM25/ZrO2 composite material. The cast samples were subjected to physical and mechanical test viz, density, hardness, tensile,
Matéria (Rio J.). Publicado em: 10/08/2017
-
8. Microstructure and Mechanical Properties of Borided Inconel 625 Superalloy
ABSTRACT The Ni- based superalloy Inconel 625 is extensively used owing to its high strength, excellent fabricability, good weldability and outstanding resistance to high temperature corrosion against aggressive environments. However, despite its unique properties and extensive use, its wear resistance is in some cases unsatisfactory. In this study, Inconel
Matéria (Rio J.). Publicado em: 22/06/2017
-
9. Efecto de la Composición Química del Metal de Aporte y del Calor Aportado Sobre la Microestructura y las Propiedades Mecánicas de Juntas Soldadas de Aceros Inoxidables Dúplex
Abstract Duplex stainless steels are characterized by good weldability and mechanical properties; they also present a high resistance to general and localized corrosion. They are the main materials when welding pipes with high requirements in different industries, mainly oil and gas. These steels have a microstructure consisting of two phases: 50% austenite
Soldag. insp.. Publicado em: 2017-06
-
10. Influence of Heat Treatments on the Impact Toughness of a Ti-stabilized 12%Cr Supermartensitic Stainless Steel
The supermartensitic stainless steels (SMSS) are a relatively new class of corrosion resistant alloys developed to obtain a better combination of weldability, strength, toughness and corrosion resistance than conventional martensitic stainless steels. The final properties of SMSS are strongly influenced by quenching and tempering heat treatments. In this wor
Mat. Res.. Publicado em: 16/02/2017
-
11. Evaluación del Deterioro de los Electrodos al Incrementar el Número de Pulsos del Tiempo de Soldadura en Aceros IF y HSLA Galvanizados y la Afectación de las Propiedades Mecánicas en los Puntos de Soldadura
Abstract: Resistance welding points, is the most important method in the assembly industry of unibody because of its automation, which is defined as the ability of the structure to provide adequate protection to passengers against injury from a collision, mainly depends on the mechanical performance of the weld nugget. To extend the life of vehicles produced
Soldag. insp.. Publicado em: 05/01/2017
-
12. Friction Stir Welding of AZ31 Magnesium Alloys - A Numerical and Experimental Study
Abstract In this paper, weldability of magnesium alloys by friction stir welding (FSW) method which is difficult to join by the fusion welding have been investigated experimentally and numerically. To this end, the connection of magnesium alloys was performed using different welding parameters. AZ31 Mg-alloy plates were friction stir welded at rotation speed
Lat. Am. j. solids struct.. Publicado em: 2017-01