Influence of Heat Treatments on the Impact Toughness of a Ti-stabilized 12%Cr Supermartensitic Stainless Steel

AUTOR(ES)

Tavares, Sérgio Souto Maior, Abreu, Hamilton Ferreira, Strohaecker, Telmo Roberto, Silva, Mariana Bertonceli, Macêdo, Marcelo Camargo Severo de

FONTE

Mat. Res.

DATA DE PUBLICAÇÃO

16/02/2017

RESUMO

The supermartensitic stainless steels (SMSS) are a relatively new class of corrosion resistant alloys developed to obtain a better combination of weldability, strength, toughness and corrosion resistance than conventional martensitic stainless steels. The final properties of SMSS are strongly influenced by quenching and tempering heat treatments. In this work, different routes of heat treatments were tested in a Ti-stabilized 12%Cr supermartensitic stainless steel with the objective to improve mechanical properties, specially the low temperature (-46ºC) toughness. Double and triple quenching were tested and compared to single quenching heat treatments. Two tempering temperatures (500ºC and 650ºC) were tested. The results obtained with instrumented Charpy impact tests showed that a triple quenching treatment was able to increase the density of fine TiC particles and improve the mechanical properties of specimens heat treated by quenching and tempering at 650ºC.

Documentos Relacionados

• Effects of post weld heat treatments on the microstructure and mechanical properties of dissimilar weld of supermartensític stainless steel
• Influence of heat treatment on the mechanical properties of CrNi stainless steel orthodontic wires
• Influence of heat treatments on the microstructure and degree of sensitization of base metal and weld of AISI 430 stainless steel
• Influence of the Pre-Treatments and Process Temperature on the Adhesion of TiN Films Deposited by PBII&D Over Nitrided Austenitic Stainless Steel
• Microstructure and wear resistance of spray-formed supermartensitic stainless steel