Water Flow
Mostrando 1-12 de 1513 artigos, teses e dissertações.
-
1. Zeólita NaA sintetizada sobre fibra de vidro como estratégia para otimização do abrandamento de águas duras
NaA ZEOLITE SYNTHESIZED OVER FIBERGLASS AS A STRATEGY FOR OPTIMIZING HARD WATER SOFTENING. Zeolite NaA has been successfully synthesized over glass fiber surface previously activated by alkaline treatment. By varying the time of the treatment and the amount of silica and alumina precursors used in the reaction mixture, a sample with higher zeolite concentrat
Química Nova. Publicado em: 2022
-
2. INTERFERENCE OF OPERATING SPEED AND PHYSICAL PROPERTIES OF GRANULATED FERTILIZERS WITH THEIR DEPOSITION
ABSTRACT Uniformity in the deposition of granulated fertilizers in the seed furrow is essential for crop development and productivity. Quantitative (dose and flow) and qualitative factors (segregation and formulation) influence granulated fertilizer distribution throughout its application. This experiment aimed to compare the deposition of two granulated fer
Engenharia Agrícola. Publicado em: 2022
-
3. Influence of bottom ash and red mud additions on self-leveling underlayment properties
Abstract Self-levelling underlayments (SLUs) based on Portland cement (PC) are susceptible to cracking due to drying shrinkage. The present study evaluated the influence of binder contents on systems consisting of calcium aluminate cement (CAC), PC, and a source of calcium sulfate (C$), derived from the flue gas desulfurization process (FGD), on the mechanic
Cerâmica. Publicado em: 2022
-
4. No-tillage implementation: Analyzis on water-based sediment flow in the Marombas River, Brazil
RESUMO A erosão hídrica é influenciada pelos fatores clima, solo, cobertura do solo e práticas de conservação do solo. Esses fatores podem ser modificados por ações naturais (especialmente o clima) e/ou antrópicas (especialmente o solo, a cobertura do solo e as práticas conservacionistas). O fator relevo também influencia a erosão hídrica e pode
Revista Brasileira de Engenharia Agrícola e Ambiental. Publicado em: 2022
-
5. Steel desulfurization on RH degasser: physical and mathematical modeling
Abstract Due to the high-quality steel demand, especially for ultra-low Sulfur steel, RH desulfurization has been practiced. Based on this, mathematical and physical modeling have been applied to study steel desulfurization by reagent addition in the RH degasser vacuum chamber. The main result of cold modeling, using water and oil emulating steel and slag, r
REM - International Engineering Journal. Publicado em: 2022
-
6. Bayesian modeling of the maximum streamflows from the Furnas reservoir
ABSTRACT The objective of this work was to predict the maximum flow of the Furnas reservoir in the dry and wet periods. The generalized distribution of extreme values (GEV) was used with parameter estimation via Bayesian inference. Data on average daily streamflows corresponding to the years 1965 to 2017 were obtained from Hidroweb, by the National Agency fo
Engenharia Sanitaria e Ambiental. Publicado em: 2022
-
7. Silicon carbide hollow fiber membranes developed for the textile industry wastewater treatment
Abstract In order to reduce the impacts of the industrial effluent on the environment, silicon carbide hollow fiber membranes were prepared by the precipitation-immersion technique and sintered at 1450 and 1500 °C. The membranes were characterized by X-ray diffraction, their surface structure was characterized by scanning electron microscopy and atomic forc
Cerâmica. Publicado em: 2021-06
-
8. SEWAGE PERFORMANCE OF A NEW TYPE OF FLAP FILTER
ABSTRACT The drainage performance of a mesh filter determines the water consumption degree of the filter and the efficiency of the next work cycle. Through analysis, we found that the influent flow rate and the sediment content of the influent were important influencing factors. This experiment focused on the drainage time, pressure difference, and cleanline
Eng. Agríc.. Publicado em: 2021-04
-
9. Evaluation of mortars produced with Baosteel slag short flow (BSSF) steel slag as fine aggregate
Abstract The objective was to evaluate the influence of Baosteel slag short flow (BSSF) steel slag, a byproduct of a Brazilian steel mill, as a fine aggregate on the properties of fresh state and on the compressive strength of mortars. The experimental work was to characterize the BSSF steel slag and to produce simple mortars (only cement) and mixed mortars
Cerâmica. Publicado em: 2021-03
-
10. Evaluation of Antibacterial Activity, Chromatographic Analysis for Rutin and Quercetin Quantification Using HPLC-UV-Vis from the Hydro-Alcoholic Extract Obtained from Bidens pilosa Linné
Novel and miniaturized technique, a dynamic sonication-assisted solvent extraction before the analysis by high performance liquid chromatography-ultraviolet visible (HPLC-UV-Vis) for isolation, identification and quantification of rutin and quercetin metabolites in alcoholic extracts from Bidens pilosa Linné, was developed. The results showed that the flowe
J. Braz. Chem. Soc.. Publicado em: 2021-03
-
11. SEQUENTIAL MULTI-ELEMENT DETERMINATION OF TRACE-METALS IN BIODIESEL SAMPLES USING HR-CS FAAS
In this work the feasibility of sequential multi-element determination of Zn, Fe, Mg, Cu, Na, K, Cr, Al and Ca in biodiesel samples by high-resolution continuum source flame atomic absorption spectrometry (HR-CS FAAS) was investigated. Biodiesel samples obtained from different sources and different chemical processes were analysed. The samples were diluted w
Quím. Nova. Publicado em: 2021-02
-
12. APPLICABILITY OF THE SWAT HYDROLOGICAL MODEL IN THE MUCURI RIVER BASIN
ABSTRACT Land-use changes promote significant variations in streamflow regimes, and hydrological models allow studying their impacts. Based on this approach, this study aimed to assess the applicability of the SWAT model for different land-use scenarios and their respective impacts on the flow regime of the Mucuri River. The average monthly and daily water b
Eng. Agríc.. Publicado em: 2020-10