SEQUENTIAL MULTI-ELEMENT DETERMINATION OF TRACE-METALS IN BIODIESEL SAMPLES USING HR-CS FAAS
AUTOR(ES)
Jesus, Alexandre de; Zmozinski, Ariane V.; Laroque, Diane O.; Silva, Márcia M. da
FONTE
Quím. Nova
DATA DE PUBLICAÇÃO
2021-02
RESUMO
In this work the feasibility of sequential multi-element determination of Zn, Fe, Mg, Cu, Na, K, Cr, Al and Ca in biodiesel samples by high-resolution continuum source flame atomic absorption spectrometry (HR-CS FAAS) was investigated. Biodiesel samples obtained from different sources and different chemical processes were analysed. The samples were diluted with n-propanol and water (1.4 mol L-1 HNO3) to form a microemulsion (ME) before its introduction in the HR-CS FAAS using a flow injection mode. The sample B-01 (obtained from soybean oil) was used for optimisation of the instrumental parameters. The accuracy of the proposed method was checked by analysis of certified reference material (CRM) Conostan BDM2A (for K and Na) and BDM2B (for Ca and Mg) and by comparison with acid digestion and recovery tests (for Zn, Fe, Cu, Cr and Al). The obtained results for CRM analysis showed good agreement with certified values within 95% of confidence (Student’s t-test). Recovery tests values ranged from 87-114%. The method developed for the analysis of biodiesel samples is accurate, simple, fast, and suitable for routine application.
Documentos Relacionados
- Determination of trace elements in B5-diesel oil by HR-CS ET AAS using a simple dilute-and-shoot approach
- Explorando potencialidades da técnica HR-CS FAAS na determinação de Ni e Pb em água mineral
- Determination of Chlorine in Crude Oil Emulsified via the MgCl Molecule by HR-CS MAS
- Determination of copper, iron, lead and zinc in gasoline by sequential multi-element flame atomic absorption spectrometry after solid phase extraction
- Determination of Na, K, Mg and Ca in biodiesel by LS F AAS and HR-CS F AAS: studies that supported the proposal of the ABNT NBR 15556 norm