Voltage Control
Mostrando 37-48 de 772 artigos, teses e dissertações.
-
37. Construção de células solares sensibilizadas por corante a partir de nanoestruturas de ZnO obtidas por método hidrotermal / Construction of dye-sensitized solar cells from Nanostructures ZnO obtained by Method Hidroterma
The Photovoltaic (PV) sector has been facing an accelerated development rate within the last decade, which is comparable to the other renewable energy sources, according to the data released by the International Energy Agency (IEA). Therefore, a myriad of R&D activities and technological innovations are under way in order to cut down the manufacturing cost o
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 01/08/2011
-
38. Estratégia para estimação do conjugado eletromagnético de motores de indução / STRATEGY FOR THE ESTIMATION OF TORQUE ELECTROMAGNETIC INDUCTION MOTORS
The purpose of this work is to develop a strategy for determining the electromagnetic torque of induction motors (MIT) from the stator flux estimation, which presents higher robustness against parametric variations. The stator flux is estimated by integrating the voltage model of the machine, applying Highpass Filters (HFP) for ideal integration of electromo
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/05/2011
-
39. Modelagem e Controle de Conversores Fonte de Tensão Utilizados em Sistemas de Geração Fotovoltaicos Conectados á Rede Elétrica de Distribuição
Esta dissertação apresenta uma estratégia de controle para sistemas de geração fotovoltaicos, de único estágio, trifásicos, conectados á rede elétrica de distribuição. São desenvolvidos modelos matemáticos para representar as características dinâmicas dos painéis fotovoltaicos, do conversor fonte de tensão (VSC - Voltage Source Converter")
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/04/2011
-
40. Avaliação do Desempenho de Dispositivos de Controle e Modelagem de Carga a Partir de Regiões de Segurança Estática
Este trabalho tem por objetivo principal a avaliação do desempenho de dispositivos de controle e da modelagem da carga a partir de Regiões de Segurança Estática. Trata-se de uma importante ferramenta para avaliação da segurança de sistemas elétricos de potência, utilizadas tanto em ambiente off-line de planejamento da expansão e operação, quanto
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/03/2011
-
41. DETERMINATION OF VOLTAGE CONTROL AREAS BASED ON INTERDEPENDENT CONTROLLER EQUIPMENTS / DETERMINAÇÃO DE ÁREAS DE CONTROLE DE TENSÃO COM BASE NA INTERDEPENDÊNCIA DOS EQUIPAMENTOS CONTROLADORES
Após a incidência de inúmeros problemas relacionados a fenômenos de instabilidade de tensão, o controle de potência reativa em sistemas elétricos de potência tornou-se um assunto importante os últimos anos. Um adequado controle do perfil de tensão em uma área pode contribuir para evitar este tipo de problema. Com esse objetivo, determinam-se área
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 17/03/2011
-
42. Magneto luminescência em diodos de tunelamento ressonante contendo pontos quânticos de InAs
In this work, we have studied the spin polarization of carriers in n-type resonant tunneling diodes (RTDs) of GaAs/AlGaAs which incorporates a single layer of InAs selfassembled quantum dots in the center of the GaAs quantum well (QW) grown on (3 1 1)B oriented GaAs substrates.We have performed electrical and optical measurements in the presence and absence
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/03/2011
-
43. Aplicabilidad del monitoreo de emisiones del arco eléctrico para el control de calidad en el proceso MAG-S
Ensuring quality in welding is not a trivial task. For this purpose several quality control checks are performed, at the expense, costs and production times are increased. There are several automated welding systems and they are assisted by control systems based on monitoring of welding parameters. However, automated quality monitoring systems are limited an
Soldagem & Inspeção. Publicado em: 2011-12
-
44. Fabrication and characterization of nanofibrous scaffold developed by electrospinning
Electrospinning has been recognized as an efficient technique for the forming of polymer nanofibers. Silk fibroin (SF) nanofibers were electrospun from SF solution using trifluoroacetic acid solution as a solvent. In the present work, we have systematically evaluated the effects of instrument parameters, including applied voltage, tip-target distance, soluti
Materials Research. Publicado em: 23/09/2011
-
45. Structural vibration control using extension and shear active-passive piezoelectric networks including sensitivity to electrical uncertainties
Active-Passive Piezoelectric Networks (APPN) integrate active voltage sources with passive resistance-inductance shunt circuits to a piezoelectric patch. This technique allows to simultaneously passively dissipate vibratory energy through the shunt circuit and actively control the structural vibrations. This work presents an analysis of active-passive dampin
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2011-09
-
46. Modelling chloride penetration in concrete using electrical voltage and current approaches
This paper reports a research programme aimed at giving a better understanding of the phenomena involved in the chloride penetration in cement-based materials. The general approach used was to solve the Nernst-Planck equation numerically for two physical ideal states that define the possible conditions under which chlorides will move through concrete. These
Materials Research. Publicado em: 04/03/2011
-
47. High-energy extracorporeal shockwave therapy in a patellar tendon animal model: a vascularizationfocused study
OBJECTIVE: The aim of this study was to analyze the effect of high-energy extracorporeal shockwave therapy on tendon angiogenesis in the patellar tendons of rabbits. We sought to investigate whether different voltage and number pulses modify the angiogenesis pattern. INTRODUCTION: High-energy extracorporeal shockwave therapy is an option in the treatment of
Clinics. Publicado em: 2011
-
48. Avaliação e controle de margem de carregamento em sistemas elétricos de potência / Evaluation and control of loading margin in electric power systems
Neste trabalho é proposta a determinação do ponto de Máximo Carregamento (PMC) em sistemas elétricos de potência por meio do método da Função Lagrangiana Barreira Modificada (FLBM), uma variante do método de Pontos Interiores (PI). Também por meio do método da FLBM, busca-se determinar qual é a barra, para cada sistema, que apresenta a maior sen
Publicado em: 2011