Viscous Fluid
Mostrando 1-12 de 97 artigos, teses e dissertações.
-
1. Rheology of mine tailings deposits for dam break analyses
Abstract This article deals with the rheology of tailings deposits related to dam break analysis. The material used was a fine tailings from iron ore processing. Geotechnical and rheological characterization of these tailings were performed. The rheological characterization consisted of rotational and oscillatory tests. It was observed that the rheological p
REM, Int. Eng. J.. Publicado em: 2021-06
-
2. Numerical Simulation of a Pitching Airfoil Under Dynamic Stall of Low Reynolds Number Flow
ABSTRACT: In this research, viscous, unsteady and turbulent fluid flow is simulated numerically around a pitching NACA0012 airfoil in the dynamic stall area. The Navier-Stokes equations are discretized based on the finite volume method and are solved by the PIMPLE algorithm in the open source software, namely OpenFOAM. The SST k - ω model is used as the tur
J. Aerosp. Technol. Manag.. Publicado em: 14/11/2019
-
3. An outbreak of compressive myelopathy due to pyogranulomatous reaction to the oily adjuvant of the foot-and-mouth disease vaccine - case report
RESUMO São descritos casos de síndrome de compressão medular, associada a granulomas pós-vacinais, em bovinos Nelore, provenientes de uma propriedade em Minas Gerais. Esses bovinos apresentavam ataxia e paresia bilateral dos membros pélvicos, que evoluiu para paralisia e decúbito esternal. Na necropsia, áreas focalmente extensas da musculatura na regi
Arq. Bras. Med. Vet. Zootec.. Publicado em: 28/10/2019
-
4. Characterization of a pediatric rotary blood pump
Abstract Introduction A ventricular assist device (VAD) is an electromechanical pump used to treat heart failures. For designing the physiological control system for a VAD, one needs a mathematical model and its related parameters. This paper presents a characterization procedure for determining the model parameter values of the electrical, mechanical, and
Res. Biomed. Eng.. Publicado em: 29/11/2018
-
5. On the development of the Navier-Stokes equation by Navier
After the work of Navier, the Navier-Stokes equation was re-obtained by different arguments by numerous investigators. We have chosen to revisit the approaches of Navier not only because they were pioneering, but also because, unexpectedly, by undergirding his theory on Laplace's new concept of molecular forces - thought to be capable of capturing the effect
Rev. Bras. Ensino Fís.. Publicado em: 30/11/2017
-
6. Reflection and Refraction of Waves at the Boundary of a Non-Viscous Porous Solid Saturated with Single Fluid and a Porous Solid Saturated with Two Immiscible Fluids
Abstract The phenomenon of reflection and refraction is studied at the welded interface between two different porous solids. One is saturated with single non-viscous fluid and other is saturated with two immiscible viscous fluids. The incidence of Pf, Ps or SV wave through porous solid saturated with non-viscous fluid results in the three reflected waves and
Lat. Am. j. solids struct.. Publicado em: 2016-07
-
7. CFD 2D Description of Local Flow of Polymer Workpiece through a modified U-Shaped Die During Equal Channel Multiple Angular Extrusion
The present article is focused on a 2D computational fluid mechanics study of local viscous flow dynamics and the formation character of rotary modes of deformation during Equal Channel Multiple Angular Extrusion (ECMAE) of a polymer workpiece fluid model through a U-shaped die with parallel slants in channel intersection zones. The present local flow proble
Mat. Res.. Publicado em: 08/04/2016
-
8. EFFECT OF NON-DARCY FLOW COEFFICIENT VARIATION DUE TO WATER VAPORIZATION ON WELL PRODUCTIVITY OF GAS CONDENSATE RESERVOIRS
Abstract Well productivity of gas condensate reservoirs is highly affected by near-wellbore phenomena. Inertial force resulting from convective acceleration of fluid particles in the medium, as well as viscous force, determines the flow of gas through porous media at high velocity. Pressure drop builds up the molar content of water in gas by water vaporizati
Braz. J. Chem. Eng.. Publicado em: 2015-03
-
9. Reflection of attenuated waves at the surface of a fractured porous solid saturated with two immiscible viscous fluids
The mathematical model for wave motion in a fractured porous solid is solved for the propagation of harmonic plane wave along a general direction in 3-D space. The solution is obtained in the form of Christoffel equations, which are solved further to define the complex velocities and polarisations of five attenuated wavesin the medium. Four of these waves ar
Lat. Am. j. solids struct.. Publicado em: 2014-12
-
10. Distribuição do tempo de residência e letalidade no processamento térmico contínuo de líquidos com escoamento laminar não ideal em trocadores bitubulares. / Residence time distribution and lethality in the continuous thermal processing of liquids with non ideal laminar flow in bitubular exchangers.
Tubular heat exchangers are widely used for thermal processing of viscous liquid foods because they have larger hydraulic diameters than the plate heat exchangers. The calculation of lethality in this type of exchanger is directly related to velocity profile and the residence time distribution (RTD). For the laminar flow of viscous fluids, Newtonian and non-
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 02/03/2012
-
11. Study of water entry of circular cylinder by using analytical and numerical solutions
Water impact phenomenon in the case of a circular cylinder is an important issue in offshore industry where cross members may be in the splash zone of the incident wave. An analytical method as well as a numerical solution are employed to study the water entry problem of a circular section. The procedure for derivation of the analytical formulas is demonstra
J. Braz. Soc. Mech. Sci. & Eng.. Publicado em: 2012-09
-
12. Numerical Simulation of Performance of an Axial Turbine First Stage
Abstract: This work has presented the first stage performance at design and off-design operating points of an axial turbine, with two stages using a numerical simulation. Experimental methods of predicting the performance of axial turbine is costly and time consuming compared to the computationalfluid dynamics approach. Therefore, computational techniques we
J. Aerosp. Technol. Manag.. Publicado em: 2012-06