Variable Loading
Mostrando 1-12 de 51 artigos, teses e dissertações.
-
1. Optimization of shells modeled using NURBS subjected to a dynamic loading condition
Abstract This study presents an optimization method for the thickness of shell elements subjected to dynamic loads. Structural analyses were carried out using the finite element method. The analyzed domains were modeled using NURBS, and meshes were generated using a transformation of the parametric domain into the geometric domain via a geometric function. T
REM, Int. Eng. J.. Publicado em: 2020-03
-
2. New nonlinear solution of nearly incompressible hyperelastic FGM cylindrical shells with arbitrary variable thickness and non-uniform pressure based on perturbation theory
Abstract In this paper, nonlinear analysis of thick cylindrical shells with arbitrary variable thickness made of hyperelastic FGM with radially variation of material properties in nearly incompressible state under non-uniform pressure loading is presented. Thickness and pressure of the shell vary in axial direction by linear and/or nonlinear functions. The g
Lat. Am. j. solids struct.. Publicado em: 28/10/2019
-
3. An efficient mechanical-probabilistic approach for the collapse modelling of RC structures
Resumo As estruturas em concreto armado são largamente utilizadas ao redor do mundo. Entretanto, a modelagem de seu complexo comportamento mecânico por formulações numéricas eficientes tem sido marginalmente apresentada na literatura. As formulações eficientes possibilitam a precisa e realista representação dos fenômenos mecânicos envolvidos e sã
Rev. IBRACON Estrut. Mater.. Publicado em: 20/05/2019
-
4. Finite element modelling to assess the effect of position and size of the piezoelectric layer of a hybrid beam
Abstract A one dimensional finite element model is presented to assess the effect of position and size of the piezoelectric layer of a hybrid beam. The efficient layerwise (zigzag) theory is used for making the finite element model. The 1D beam element has eight mechanical and a variable number of electrical degrees of freedom. The codes are developed in Ma
Lat. Am. j. solids struct.. Publicado em: 03/05/2018
-
5. On the Nonlinear Transient Analysis of Planar Steel Frames with Semi-Rigid Connections: From Fundamentals to Algorithms and Numerical Studies
Abstract This paper presents the fundamentals for prediction of a more realistic behavior of planar steel frames with semi-rigid connections under dynamic loading. The majority of the research in this area concentrates on the nonlinear static analysis of frames with semi-rigid connections. Indeed, few studies have contributed to the nonlinear dynamic and vi
Lat. Am. j. solids struct.. Publicado em: 03/05/2018
-
6. Probability Analysis in Determining the Behaviour of Variable Amplitude Strain Signal Based on Extraction Segments
Abstract This paper focuses on analysis in determining the behaviour of variable amplitude strain signals based on extraction of segments. The constant Amplitude loading (CAL), that was used in the laboratory tests, was designed according to the variable amplitude loading (VAL) from Society of Automotive Engineers (SAE). The SAE strain signal was then edited
Lat. Am. j. solids struct.. Publicado em: 2017-12
-
7. Analytical Bending and Stress Analysis of Variable Thickness FGM Auxetic Conical/Cylindrical Shells with General Tractions
Abstract In the present research, a unified semi-analytical solution that incorporates influence of the auxeticity (negative Poisson ratio) of the material into elastic responses of the variable thickness functionally graded conical and cylindrical shells and circular/annular plates is developed. The top or bottom layers of the shell/plate may be subjected t
Lat. Am. j. solids struct.. Publicado em: 2017-06
-
8. Rapid and variable-volume sampling loading in nonaqueous microchip electrophoresis
Um esquema rápido e de volume variável de carregamento de amostras para eletroforese não-aquosa em microchip com fluorescência induzida a laser (NAMCE-LIF) foi desenvolvido, incluindo um plugue de polímero poroso, uma bomba de microvácuo de baixo custo e uma fonte de alta tensão com potencial único. O plugue de polímero poroso foi fabricado dentro d
J. Braz. Chem. Soc.. Publicado em: 2014-04
-
9. Crack propagation under variable amplitude loading
Experience shows that a damage induced by a given cycle is dependent on the loading history. In this regard, the objective of this paper is to study and describe the phenomenology of the loading history on crack propagation. Different loading configuration has been considered for fatigue crack propagation of XC38 steel; overload cycles followed by underload
Mat. Res.. Publicado em: 05/07/2013
-
10. Fatigue analysis and life prediction of composite highway bridge decks under traffic loading
Steel and composite (steel-concrete) highway bridges are currently subjected to dynamic actions of variable magnitude due to convoy of vehicles crossing on the deck pavement. These dynamic actions can generate the nucleation of fractures or even their propagation on the bridge deck structure. Proper consideration of all of the aspects mentioned pointed our t
Lat. Am. j. solids struct.. Publicado em: 2013-05
-
11. A characterization for the flow behavior of as-extruded 7075 aluminum alloy by the improved Arrhenius model with variable parameters
In order to perform the numerical simulations of forging response and establish the processing parameters for as-extruded 7075 aluminum alloy, the compressive deformation behavior of as-extruded 7075 aluminum alloy were investigated at the temperatures of 573 K, 623 K, 673 K and 723 K and the strain rates of 0.01 s-1, 0.1 s-1, 1 s-1 and 10 s-1 on a Gleeble15
Mat. Res.. Publicado em: 13/11/2012
-
12. Influência do tipo de medição na determinação do módulo estático de elasticidade do concreto / Influence of Type of Measurement in Determining the Static Module of Elasticity of Concrete
The knowledge of the compressive strength and static modulus of elasticity is fundamental to the study of deformations of concrete, since deformations can cause cracks that compromise both the structural behavior of the element and serve as an entry to deleterious agents. For purposes of correlating values of compressive strength and static modulus of elasti
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/08/2011