Tubular Steel
Mostrando 1-12 de 57 artigos, teses e dissertações.
-
1. Optimum design of steel columns filled with concrete via genetic algorithm: environmental impact and cost analysis
Abstract The use of concrete-filled tubular columns as part of structural systems has steadily increased throughout the years. The growing demand for structural elements of this nature is a direct result of the possibility to use various cross-section shapes that have increased strength, along with resistance to fire and other corrosive agents. The main obje
REM - International Engineering Journal. Publicado em: 2022
-
2. Vibration control device for steel tubular towers of Horizontal Axis Wind Turbines
Abstract This paper presents and discusses the design of a vibration control device for a 120 m high steel tubular tower of onshore Horizontal Axis Wind Turbine (HAWT). The tower is modeled using beam (own code), and shell and solid finite elements (via ANSYS). The Dynamic Vibration Absorber (DVA) is designed to be attached to the tower top, aiming to analyz
Lat. Am. j. solids struct.. Publicado em: 10/07/2019
-
3. EXPERIMENTAL INVESTIGATION ON CONCRETE FILLED STEEL TUBULAR COLUMN TO FOUNDATION CONNECTIONS SUBJECTED TO COMBINED AXIAL AND LATERAL CYCLIC LOADING
Abstract This study focuses on performance of CFT column to foundation connections subjected to combined axial and lateral cyclic loading. Experimental investigations were carried out on five specimens with exposed column base and embedded column base connections. The parameters considered were number of stiffeners and embedment depth of CFT column. The forc
Lat. Am. j. solids struct.. Publicado em: 01/07/2019
-
4. Mejora de la resistencia al desgaste abrasivo de un revestimiento Fe-Cr-Mn-C mediante la adición de V
ABSTRACT The aim of this work is to increase the abrasive wear resistance of a coating, applied on plates of AISI 1020 carbon steel, using tubular coated electrodes with the Fe-Cr-Mn-C alloy system. In order to achieve this increase, V was added to the alloy system. The resulting coating were studied using optical microscopy (MO), X-ray diffraction and micro
Matéria (Rio J.). Publicado em: 20/05/2019
-
5. Experimental analysis of bolts employed as shear connectors in circular concrete-filled tube columns
Resumo Este estudo apresenta análises experimentais e teóricas do uso de parafusos como conectores de cisalhamento em pilares mistos de aço em seção tubular circular preenchidos com concreto (PMPCs). Os resultados obtidos experimentalmente são comparados com os resultados das formulações propostas pela norma ABNT NBR 16239:2013. Os ensaios são de ci
Rev. IBRACON Estrut. Mater.. Publicado em: 20/05/2019
-
6. Uso do diafragma externo na ligação entre viga de seção I e pilar tubular de seção circular
Resumo O diafragma externo na ligação entre viga metálica de seção I e pilar metálico tubular de seção circular tem por objetivo o aumento na eficácia da transferência dos esforços. A proposta é dar alternativas ao uso desse sistema estrutural, reduzindo a limitação imposta por sua simples ligação ao se adicionar esse elemento, similar a um a
Ambient. constr.. Publicado em: 2019-03
-
7. Influence of shear lag coefficienton circular hollow sections with bolted sleeve connections
Abstract The circular hollow sections (CHS) are being widely employed in steel structures around the world, increasing the development of new researches. This article proposes an innovative connection model for circular hollow sections that facilitates and reduces the assembly cost of hollow section structures. The proposed connection is a tube sleeve, used
REM, Int. Eng. J.. Publicado em: 2017-12
-
8. Buckling of Slender Concrete-Filled Steel Tubes with Compliant Interfaces
Abstract This paper presents an exact model for studying the global buckling of concrete-filled steel tubular (CFST) columns with compliant interfaces between the concrete core and steel tube. This model is then used to evaluate exact critical buckling loads and modes of CFST columns. The results prove that interface compliance can considerably reduce the cr
Lat. Am. j. solids struct.. Publicado em: 2017-10
-
9. Temperature field of concrete-filled steel tubular columns in fire
Abstract The composite structures formed by the association of steel profiles with concrete have shown to be an advantageous alternative, improving the behavior of the steel structures concerning their load capacity, stiffness, and durability, under fire conditions. The concrete-filled tubular columns have become an attractive alternative for the civil const
REM, Int. Eng. J.. Publicado em: 2017-06
-
10. Numerical methodology for analyses of tubular KK multiplanar steel joints
Abstract Herein is presented a numerical methodology for a static resistance analysis of symmetrically loaded multiplanar KK joints in circular hollow steel sections. This methodology addresses factors related to the simulation of KK joints such as the material properties, the boundary conditions, mesh generation and refinement, incremental load steps and fa
REM, Int. Eng. J.. Publicado em: 2017-06
-
11. Efecto de la Composición Química del Metal de Aporte y del Calor Aportado Sobre la Microestructura y las Propiedades Mecánicas de Juntas Soldadas de Aceros Inoxidables Dúplex
Abstract Duplex stainless steels are characterized by good weldability and mechanical properties; they also present a high resistance to general and localized corrosion. They are the main materials when welding pipes with high requirements in different industries, mainly oil and gas. These steels have a microstructure consisting of two phases: 50% austenite
Soldag. insp.. Publicado em: 2017-06
-
12. Influence of Pushing and Pulling the Electrode Procedure and Addition of Second Layer of Welding on the Wear in Hardfacing of Fe-Cr-C
The aim of this work is evaluate the influence of welding conditions on abrasive wear resistance in coating of Fe-Cr-C. The metal base used in this investigation was the steel SAE 1020 and as welded metal the selfshilded tubular wires of Fe-Cr-C with 1.6 mm of diameter. The welding parameter such as amperage, voltage, welding speed, wire feed speed and the d
Mat. Res.. Publicado em: 19/09/2016