Three Dimensional Numerical Analyses
Mostrando 1-12 de 24 artigos, teses e dissertações.
-
1. Numerical study of the behaviour of loop bar splicing in joints of reinforced concrete structures
Resumo Emendas com barras retas ocupam muito espaço devido ao comprimento de traspasse necessário. Dessa forma, em situações em que há uma limitação de espaço para a emenda, uma armação que constitui uma solução interessante é a emenda por meio de laço, que, apesar de ter poucos estudos relacionados, vem sendo bastante difundida na construção
Rev. IBRACON Estrut. Mater.. Publicado em: 2019-02
-
2. Aspects of Finite Element Modeling of Punching Shear Behavior of Reinforced Concrete Flat Slabs
Abstract A series of nonlinear FE analyses was conducted in this paper to model the punching shear failure of RC flat slabs. The analyses were carried out in the software DIANA using three-dimensional continuum elements. These analyses involve the test of different modeling choices in order to evaluate their influences on punching shear failure modeling. The
Lat. Am. j. solids struct.. Publicado em: 04/10/2018
-
3. Micro-mechanical numerical analyses on the effect of stress state on ductile damage under dynamic loading conditions
Abstract The paper deals with the effect of stress state on the dynamic damage behavior of ductile materials. The rate- and temperature-dependent continuum damage model has been enhanced to take into account the influence of the stress triaxiality and the Lode parameter on damage condition and on rate equations of damage strains. Different branches of these
Lat. Am. j. solids struct.. Publicado em: 06/08/2018
-
4. The Search for the Centre of Resistance of a Tooth Using a Finite Element Model and the Continuum Mechanics
Abstract In orthodontics, the CR is defined as the ideal point for the positioning of the bracket. This paper presents numerical analyses of a premolar tooth, which aim at searching the centre of resistance (CR) by applying several external torques. We built the geometry of the tooth by making a tomographic renderisation with the software MIMICS. The numeric
Lat. Am. j. solids struct.. Publicado em: 14/06/2018
-
5. Seismic Performance of Post-Northridge Welded Connections
Abstract Post-Northridge welded connections are widely used in engineering projects as lateral-force-resisting systems. In this study, we aim to assess the cyclic performance of the post-Northridge welded connections to compare the connections with each other. For this purpose, we focus on Welded Unreinforced Flange – Welded Web (WUF-W), Welded Flange Pla
Lat. Am. j. solids struct.. Publicado em: 26/04/2018
-
6. The Caughey absorbing layer method - implementation and validation in Ansys software
AbstractThis paper addresses the Caughey Absorbing Layer Method (CALM) performance in the one-dimensional problem and its implementation in commercial software, with possibility of direct extension to two-dimensions. The adequacy and numerical efficiency is evaluated using three different error measures and five different variations of the damping profile. O
Lat. Am. j. solids struct.. Publicado em: 2015-08
-
7. Three-dimensional analysis of an orthodontic delta spring
INTRODUCTION: The purpose of this study was to analyze the force system, moment-force ratios (M/F) and von Mises stresses in an orthodontic delta spring using a 3D finite element model. The M/F ratio produced by an orthodontic spring is related to the different types of tooth movement that are likely to occur in the sagittal and occlusal planes. METHODS: Ana
Rev. Bras. Eng. Bioméd.. Publicado em: 2014-09
-
8. Experimental vibration analysis for a 3D scaled model of a three-floor steel structure
In this paper we present an experimental study of a three dimensional physical model of a three-floor structure subjected to forced vibrations by imposing displacements in its support. The aim of this work is to analyze the behavior of the building when a dynamic vibration absorber (DVA) is acting. An analytic simplified analysis and a numerical study are de
Lat. Am. j. solids struct.. Publicado em: 2012-10
-
9. Análise numérica 3D do túnel auxiliar a jusante da UHE simplício-anta / 3D Numerical analysis of the tunnel downstream of the auxiliary
With the accelerated occupation of the space, the use of tunnels play an important role in engineering, in this sense, the deformations control during it s construction process is very important for the best performance of tunnels. In this sense the numerical analyzes represent a likely economy in the design process. This paper uses a theory of elasticity in
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/08/2011
-
10. Methodology for the Design of Cover Systems Based on the Case Study Conducted at Site Rio Paracatu Mineração (RPM) in Paracatu, Minas Gerais / Metodologia para Dimensionamento de Sistemas de Cobertura com Base em Estudo de Caso Realizado na Mina da Empresa Rio Paracatu Mineração (RPM) em Paracatu, Minas Gerais
Nearly four years ago, two experimental cover systems of the evapotranspirative type, have been designed and built in Rio Paracatu Mineração (RPM), Paracatu, Minas Gerais (Amorim, 2008). One cover system was made with a hydraulic barrier layer and the other with a capillary barrier layer, both with monitoring systems consisting of a runoff meter, lysimeter
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 31/01/2011
-
11. Coupled thermal and structural analysis of steel columns under fire condition / Análise termoestrutural de pilares de aço em situação de incêndio
The most part of materials whose constitute fire protection elements or structural elements, such as steel columns, when exposed to high temperature have their strength and elasticity modulus reduced caused by thermal action. Therefore the structure can collapse earlier than in an ambient temperature situation. Based in this aspect, the objective of the pres
Publicado em: 2009
-
12. Modelagem Computacional da Propagação Acústica Proveniente de Fontes Multifrequênciais Usando Guias Digitais de Ondas / Computational Modeling of Wave Propagation from Multifrequêncial Source Using Mesh Digital Waveguide
The goal of this research is the creation of virtual acoustic environments, in this context, was constructed a computational tool, aiming to the acoustic modeling of reverberation environment. In this way, it was necessary to elaborate a numerical system able to simulate the wave sound propagation and, mainly its interactions with the surfaces encountered in
Publicado em: 2009