Thin Film
Mostrando 13-24 de 376 artigos, teses e dissertações.
-
13. Experimental-numerical Technique to Evaluate the Thickness of TiN Thin Film
In this study, the numerical analysis of instrumented indentation testing was combined with the experimental procedure to evaluate the mechanical properties and thickness of a titanium nitride (TiN) film deposited on titanium substrate (Ti) by plasma processing. TiN film thickness is an important parameter for the surface treatment industry. In numerical ana
Mat. Res.. Publicado em: 09/09/2019
-
14. Tuning Emitting Color of Electroluminescent Devices Containing Tris(2-acyl-1,3-indandionate)aluminum(III) Complexes as Emitting Layers
In this study, a novel type of tris(2-acyl-1,3-indandione)-aluminum(III) coordination compounds of the general formula [Al(acind)3]H2O, where 2-acyl-1,3-indandione (acind), 2-acetyl-1,3-indandione (aind), 2-benzoyl-1,3-indandione (bind), and 4-methyl-2-benzoyl-1,3-indandione (mbind), were synthesized and characterized by elemental analysis (CHN), Fourier tra
J. Braz. Chem. Soc.. Publicado em: 12/08/2019
-
15. PREPARATION AND CHARACTERIZATION OF THIN-FILM COMPOSITE REVERSE OSMOSIS MEMBRANE ON A NOVEL AMINOSILANE-MODIFIED POLYVINYL CHLORIDE SUPPORT
ABSTRACT Herein, the influence of pure and modified polyvinyl chloride (PVC) support layers on the performance of thin-film composite (TFC) membranes was investigated in water desalination. Accordingly, the PVC support was modified using (3-Aminopropyl) triethoxysilane (APTES) through bulk modification. The supports were synthesized at different doses of APT
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
16. Corrosion and Micro-abrasive Wear Behaviour of 2524-T3 Aluminium Alloy with PAni-NPs/PSS LbL Coating
In this paper, we present an alternative method to obtain thin films for coating protection on the surface of the AA2524-T3 Al-alloy by using the Layer-by-Layer (LbL) technique. The LbL films were fabricated by alternated immersion of the Al-alloy into a poly(styrene sulfonate) (PSS) and polyaniline nanoparticles (PAni-NPs) solutions, obtaining a PAni-NPs/PS
Mat. Res.. Publicado em: 06/06/2019
-
17. Influência da densidade de potência e da porcentagem de N2 na atmosfera de deposição na dureza e no módulo de Young em filmes de aço inoxidável AISI 316 depositados por pulverização catódica
RESUMO O processo de recobrimento por pulverização catódica é uma técnica amplamente utilizada para produção de revestimentos metálicos e cerâmicos, devido a versatilidade no controle das propriedades com pequenas mudanças nos parâmetros de processo, como densidade de potência aplica ao cátodo magnetron e atmosfera de trabalho. Sendo assim, as p
Matéria (Rio J.). Publicado em: 20/05/2019
-
18. Al-doping and Properties of AZO Thin Films Grown at Room Temperature: Sputtering Pressure Effect
Aluminum zinc oxide (AZO) thin films were synthesized on glass substrates by radio frequency (rf) magnetron sputtering from a metallic Zn-Al (5 at. %) target at room temperature. The morphological, structural, electrical and optical properties of the films were studied as a function of the sputtering pressure, which was varied from 0.1 to 6.7 Pa. X-ray diffr
Mat. Res.. Publicado em: 09/05/2019
-
19. An Amorphous Silicon Photo TFT with Si3N4/Al2O3 or HfO2 Double Layered Insulator for Digital Imaging Applications
Abstract This paper focuses on amorphous silicon photo thin-film transistors with double layered insulator using Si3N4/Al2O3 or HfO2 as candidates for the succession of Si3N4 as a traditional insulator in the fabrication of hydrogenated amorphous silicon thin-film transistors. Whether for industry or for research, there is a need to investigate the use of th
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2019-03
-
20. Development and characterization of gas sensors using thin films of polyaniline as active layer
ABSTRACT This work aimed at the development and characterization of gas sensing devices using thin films of polyaniline (PAni) as active layer, deposited by in situ polymerization. The polyaniline, an intrinsically conductive polymer, was used due to its high sensitivity to gases, low response time and stability, ease of synthesis and low cost. The sensor wa
Matéria (Rio J.). Publicado em: 06/12/2018
-
21. Commitment Between Roughness and Crystallite Size in the Vanadium Oxide Thin Film opto-electrochemical Properties
The V2O5 thin films has been widely studied because it has application as ionic host in electrochromic and lithium-ion batteries, two technologies that have an intimate connection with sustainability as substitutes for fossil energies and as agents for improving energy efficiency. In electrochromic technology, V2O5 is applied as a passive electrode due to it
Mat. Res.. Publicado em: 01/11/2018
-
22. Interaction study between vancomycin and liposomes containing natural compounds against methicillin-resistant Staphylococcus aureus clinical isolates
ABSTRACT The treatment of infections caused by resistant microorganisms is limited, and vancomycin (VAN) treatment failures for methicillin-resistant Staphylococcus aureus (MRSA) bacteremia are not uncommon, even when MRSA clinical isolates are susceptible to VAN. Thus, this study proposed the association of VAN with usnic acid and β-lapachone encapsulated
Braz. J. Pharm. Sci.. Publicado em: 26/07/2018
-
23. Influence of water in the MQL technique in the grinding of steel AISI 4340 using CBN wheels
Abstract Usually, machining employs cooling methods to avoid high temperatures. In most cases, the cutting fluid is applied with high flow and low pressures. This technique consumes a large amount of cutting fluid that causes serious problems in the environment and in the health of the worker. An alternative to the conventional cooling method is the Minimum
REM, Int. Eng. J.. Publicado em: 2018-07
-
24. Annealing and Extended Etching Improve a Torsional Resonator for Thin Film Internal Friction Measurements
We evaluate two methods to improve the background internal friction of the Double Paddle Oscillator (DPO), which has a nominal low temperature value of Q-1 ≈ 2×10-8. We find that annealing the DPO in vacuum at 300°C for 3 hours systematically reduced Q-1 at all temperatures and revealed a 100K internal friction peak by permanently removing it. We also fi
Mat. Res.. Publicado em: 18/06/2018