Thermal Decomposition
Mostrando 13-24 de 231 artigos, teses e dissertações.
-
13. Size and shape-controlled nanomaterials based on modified polyol and thermal decomposition approaches. A brief review.
Abstract: Since its inception in 2007, the Colloidal Materials Group, one of the research groups in nanotechnology of the Institute of Chemistry of São Carlos (IQSC) at University of São Paulo (USP) carries out studies related to the development of syntheses methods of nanoparticles and multifunctional nanostructured systems. Our works search new synthesis
An. Acad. Bras. Ciênc.. Publicado em: 28/11/2019
-
14. Kaolinite/TiO2/cobalt(II) Tetracarboxymetallophthalocyanine Nanocomposites as Heterogeneous Photocatalysts for Decomposition of Organic Pollutants Trimethoprim, Caffeine and Prometryn
São Simão’s Brazilian kaolinite has been treated with titanium(IV) isopropoxide and cobalt(II) tetracarboxymetallophthalocyanine under different conditions (acidic or basic), leading, after drying at 100 ºC, to new titania-doped cobalt(II)-metallophthalocyanine/kaolinite solids. These solids were characterized by chemical analysis, powder X-ray diffract
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
15. Thermal Stability and Kinetic of Decomposition of Mono- and Dicationic Imidazolium-Based Ionic Liquids
Phase transitions, thermal stability, thermokinetics and activation parameters of degradation reaction of the dicationic ionic liquids (ILs), 1,n-bis(3-methylimidazolium-1-yl)alkane ([BisAlk(MIM)2][2Br]) and monocationic ILs, 1-(3-methylimidazolium-1-yl)alkane ([Alk(MIM)][Br]), where Alk = Dec, DoDec, TetDec, (decane, dodecane, tetradecane) were evaluated. T
J. Braz. Chem. Soc.. Publicado em: 21/10/2019
-
16. Evaluation of two-step transformation in Ni-rich titanium-nickel alloys using thermal and internal friction analyses
ABSTRACT The use of Ti-Ni memory alloys covers several fields of application such as medicine, dentistry, actuators, sensors among others. Because of the thermomechanical behavior of these materials, they are an object of continuous studies and their properties are related to the occurrence of thermoelastic martensitic phase transformations. The thermal anal
Matéria (Rio J.). Publicado em: 16/09/2019
-
17. Influência do envelhecimento termo-oxidativo nas propriedades mecânicas e de amarelamento de blendas de poliestireno com borracha reciclada de estireno-butadieno (SBR)
RESUMO Este trabalho teve como objetivo avaliar o envelhecimento termo-oxidativo, nas propriedades mecânicas e de índice de amarelamento (YI), de blendas de poliestireno com borracha reciclada (SBRr), compatibilizadas. As blendas foram preparadas, inicialmente, em uma extrusora de rosca dupla corrotacional e, posteriormente, os grânulos extrudados foram m
Matéria (Rio J.). Publicado em: 16/09/2019
-
18. Evaluation of quality parameters and chromatographic, spectroscopic, and thermogravimetric profile of Patauá oil (Oenocarpus bataua)
Abstract The objective of this research was to evaluate the quality parameters and the chromatographic, thermogravimetric, and spectroscopic profile of Patauá oil (Oenocarpus bataua). All analyses were performed according to the Recommended Practices of the American Oil Chemists’ Society (AOCS). The parameters obtained indicate conservation quality standa
Food Sci. Technol. Publicado em: 09/09/2019
-
19. DETERMINAÇÃO DOS PARÂMETROS CINÉTICOS E SIMULAÇÃO COMPUTACIONAL DO PERFLUOROPOLIÉTER (PFPE) EMPREGADO COMO LUBRIFICANTE SINTÉTICO
This work aims to determine the kinetic parameters of the thermal decomposition of a lubricating grease based on perfluoropolyether (PFPE) and the computational simulation of this decomposition. The determination of kinetic parameters of thermal decomposition was done by thermal analysis using thermogravimetry (TG) at different heating rates (β) of 10, 15 a
Quím. Nova. Publicado em: 26/08/2019
-
20. SIMULATION OF THERMAL DECOMPOSITION IN AN OPEN CAVITY: ENTROPY ANALYSIS
ABSTRACT This paper presents a numerical analysis of entropy generation in a two-dimensional rectangular channel where the inlet flow undergoes thermal decomposition resulting from a chemical reaction. The model considered viscosity and thermal conductivity to be dependent of temperature. Irreversibility due to mass transport was included in the entropy gene
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
21. Castor polyurethane used as osteosynthesis plates: microstructural and thermal analysis
Abstract Bone fractures to be corrected need stabilization of their extremities, which is achieved with the use of plates and screws. This research aimed to produce castor bean polyurethane (Ricinus communis), to make resorbable plate, structural and thermal analysis. The production was made by the glycerolysis of the triglycerides present in the oil, after
Polímeros. Publicado em: 04/07/2019
-
22. Synthesis and characterization of asphalt composite precursors using amorphous rice husk silica
Resumo Nesta pesquisa, compósitos asfálticos foram produzidos misturando asfalto com sílica extraída da casca de arroz, com relação asfalto:sílica de 1:0, 1:1,7 e 1:2, e calcinados a 150 ºC. O desenvolvimento das estruturas foi caracterizado por espectroscopia no infravermelho com transformada de Fourier (FTIR), difração de raios X (XRD), microscop
Cerâmica. Publicado em: 06/06/2019
-
23. THERMAL PROFILE OF WOOD SPECIES FROM THE BRAZILIAN SEMI-ARID REGION SUBMITTED TO PYROLYSIS
ABSTRACT The objective of this study was to evaluate the thermal decomposition profile of 10 wood species from the semi-arid region of Brazil using thermogravimetric analysis (TGA) to investigate their potential as biomass energy sources. First, flash carbonization was carried out in a muffle furnace, in which wood samples were heated to a maximum temperatur
CERNE. Publicado em: 20/05/2019
-
24. Physicomechanical and thermal analysis of bulk-fill and conventional composites
Abstract The aim of this study was to evaluate the degree of conversion (DC) and the thermal stability of bulk-fill and conventional composite resins. Eleven composite resin samples were prepared to evaluate the DC, Vickers microhardness (VMH), mass and residue/particle loss, glass transition temperature (Tg), enthalpy, and linear coefficient of thermal expa
Braz. oral res.. Publicado em: 18/03/2019