T6 Heat Treatment
Mostrando 1-12 de 72 artigos, teses e dissertações.
-
1. Mediators of energy homeostasis in hyperthyroidism
ABSTRACT Objective: The aim of this study was to assess the effect of hyperthyroidism and its treatment on body weight and composition, insulin resistance, and mediators of appetite and energy homeostasis, namely ghrelin, leptin, adiponectin, and fibroblast growth factor 21 (FGF21). Subjects and methods: Thirty-five adult patients (27 female and 8 male, ag
Archives of Endocrinology and Metabolism. Publicado em: 2022
-
2. Effects of heat treatments and edible shell coatings on egg quality after storage at room temperature
Abstract The objective of this study was to evaluate the effect of thermal treatments using different water temperatures and immersion times, as well as the application of eggshell coatings using edible materials on eggshell quality after storage for 4 weeks at room temperature (22.8 ± 4.4 °C). A total of 180 brown fresh eggs were distributed in a complete
Food Sci. Technol. Publicado em: 2020-06
-
3. Effect of Dietary Curcumin on the Antioxidant Status of Laying Hens under High-Temperature Conditions
ABSTRACT Heat stress induces oxidative stress, and reduces body antioxidant metabolite levels, which can affect poultry production performance. Dietary antioxidants protect birds against the adverse effects of heat stress. The effects of increasing concentrations of dietary curcumin on the antioxidant parameters of layers maintained under high-temperature co
Braz. J. Poult. Sci.. Publicado em: 14/11/2019
-
4. Mechanical Properties Analysis of Al2024 alloy Submitted to Different Aging Time and different Cold Plastic Deformation degree
Brazilian aeronautical industries report that, due to the high mechanical properties presented commercially, AA2024-T351 alloy presents fissures and non-homogeneous deformations during the mechanical processing. This work proposes a manufacturing process capable of increasing the ductility of the material to withstand tensions during processing and a subsequ
Mat. Res.. Publicado em: 10/07/2019
-
5. Efecto del tratamiento térmico sobre la resistencia mecánica, corrosión intergranular y exfoliación de la aleación de aluminio 7075
ABSTRACT In this study, the effects of heat treatments in the peak aged (T6), overaged (T73) and retrogression and reaging (RRA, retrogression at 200 °C for 10 min) on the microstructure, mechanical strength, exfoliation corrosion and intergranular corrosion of aluminum alloy 7075, has been investigated by optical microscope, scanning electron microscopy, t
Matéria (Rio J.). Publicado em: 19/07/2018
-
6. Effect of Interrupted Ageing and Retrogression-Reageing Treatments on Fatigue Crack Growth with a Single Applied Overload in 7050 Aluminum Alloy
The influences of interrupted ageing and retrogression and re-ageing heat treatments on fatigue crack growth with a single applied overload in 7050 aluminum alloy were investigated. The main aims were: to evaluate the influence of these heat treatment conditions on tensile properties, mainly fatigue crack growth rate and fracture process in the low-moderate
Mat. Res.. Publicado em: 19/04/2018
-
7. Characterization of Impact Toughness Properties of DIN39MnCrB6-2 Steel Grade
Boron added steels in quenched and tempered condition have been widely used in applications where good mechanical properties and low cost are required. In this study, impact resistance of DIN 39MnCrB6-2 steel grade was investigated due to its criticality in automotive components. Metastable phase diagrams were built to guide heat treatments. The influence he
Mat. Res.. Publicado em: 04/12/2017
-
8. Effect of the T6 Heat Treatment on Microhardness of a Directionally Solidified Aluminum-Based 319 Alloy
Aluminum alloys of the ANSI series 319 present Si and Cu as the main alloying elements and the mechanical strength of these alloys can be improved by the precipitation of the metastable Al2Cu phase during the ageing heat treatment. In this paper, the Al-5.5wt.%Si-3wt.%Cu alloy was elaborated and solidified in a water-cooled horizontal directional solidificat
Mat. Res.. Publicado em: 30/11/2017
-
9. Crystallization of Anatase TiO2 in Niobium Potassium Phosphate Glasses
In this work, the glass forming ability was studied in potassium phosphate glasses with increasing amounts of TiO2 in order to obtain a glass-ceramic with photocatalytic properties. The first studied series has been the binary system (100-x) KPO3-xTiO2. Homogeneous and transparent glasses could be obtained with x varying from 10 to 30 mole%. Since the photoc
Mat. Res.. Publicado em: 16/02/2017
-
10. Enhancement of Mechanical Properties of Aluminum and 2124 Aluminum Alloy by the Addition of Quasicrystalline Phases
A structural and mechanical characterization of pure aluminum and 2124 T6 aluminum alloy reinforced with quasicrystalline phases of composition Al65Cu20Fe15 and Al70.5Pd21Mn8.5 (%at.) were performed. The quasicrystalline phases were synthesized by arc melting and then milled to produce powder of the alloys, which were then mechanical mixed with the starting
Mat. Res.. Publicado em: 25/08/2016
-
11. Solution and ageing heat treatments of ZK60 magnesium alloys with rare earth additions produced by semi-solid casting
Rare earth elements reportedly improve high temperature strength and creep resistance of Mg alloys. In the present work, ZK60 Mg alloys containing different amounts (0.5, 1.5 and 2.5 wt.%) of rare earth additions were prepared by thixocasting and submitted to solution and ageing heat treatments (T4, T5 and T6). The as-cast and heat treated microstructures we
Mat. Res.. Publicado em: 2014-12
-
12. Corrosion behavior of friction stir welded lap joints of AA6061-T6 aluminum alloy
In this work, the corrosion behaviors of friction-stir lap welding of 6061-T6 Al-alloy are studied. The friction-stir lap welding was performed under different welding conditions (rotation speed and welding speed). The corrosion behavior of the parent alloy, the weld nugget zone (WNZ), and the heat affected zone (HAZ) of each welded sample working as an elec
Mat. Res.. Publicado em: 09/05/2014