Systems Simulation
Mostrando 1-12 de 900 artigos, teses e dissertações.
-
1. Efficient Low-Complexity Optimized Channel Estimating Methods for OFDM-Based Low-Voltage Broadband Power Line Communication Systems
Abstract Broadband Power Line Communication (BB-PLC) technology enables data transmission for smart grid applications. Nevertheless, channel equalizers are required in the receiver to estimate and compensate for the nonlinear time-variant impulse response and noise interference effects introduced by the BB-PLC channel. In this paper, we append the Particle S
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Single Port Multimode Reconfigurable UWB-NB Antenna for Cognitive Radio Applications
Abstract In this paper, a compact, single port, multimode reconfigurable UWB-NB antenna with a novel feeding network is presented. The proposed antenna consists of a pentagonal-shaped monopole radiator, a beveled-shaped partial defected ground plane with a rectangular slot, and a reconfigurable bypass feeding network. The antenna realizes a wideband frequenc
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
3. A 2.4 GHz Coplanar Solar Cell Patch Antenna with a Semi-Analytical Evaluation of Temperature Effects
Abstract Solar cells integrated with antennas have aroused scientific interest as an attractive energy source alternative in low power devices for IoT and Wireless Sensor Network applications. Since the space for all components in the systems is scarce, different integration ideas have been proposed in this field. However, further analysis of the performance
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
4. Compact, Broadband, and Omnidirectional Antenna Array for Millimeter-Wave Communication Systems
Abstract In this paper, a millimeter-wave printed quadrupole antenna is proposed. It consists of two symmetric printed dipoles that make the quadrupole radiating power omnidirectionally. Such an arrangement eliminates the influence of the ground as reflector. Simulation results show that the quadrupole antenna exhibits a broad impedance bandwidth and an enha
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-06
-
5. Implementing healthcare professionals’ training during COVID-19: a pre and post-test design for simulation training
ABSTRACT BACKGROUND: Coronavirus disease-19 (COVID-19) has imposed a new reality that presents several challenges for healthcare professionals. The main challenge has been the lack of proper training in relation to an unknown disease. OBJECTIVE: To investigate healthcare professionals’ acquisition of knowledge of a new airway management protocol for COVI
Sao Paulo Med. J.. Publicado em: 2021-05
-
6. PARAMETERS FOR MODELING PASSIVE SUSPENSIONS OF SPRAY BARS
ABSTRACT The uniformity and quality of spraying depend on the stability of the spray boom, defined as the suspension system between the boom and the machine chassis. This paper presents a procedure for improving the performance of passive spray bar suspensions through parameter adjustment. Two multibody dynamics models of a tractor sprayer set were developed
Eng. Agríc.. Publicado em: 2021-05
-
7. Low-Overhead Low-Complexity Carrier Phase Recovery Technique for Coherent Multi-Band OFDM-Based Superchannel Systems Enabled by Optical Frequency Combs
Abstract In this paper, we have designed a low-overhead low-complexity carrier phase tracking scheme for OFDM-based superchannel transmission system enabled by optical frequency combs. In this scheme, taking advantage of the broadband phase coherence provided by optical frequency combs among the OFDM-bands, the carrier phase retrieved from pilot-subcarriers
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-03
-
8. HYBRID SYSTEM SIMULATION TO SUPPLY HEATED AIR TO A SOLAR FOOD DRYER
ABSTRACT The intermittence of solar radiation, due to continuous rainy or cloudy days, is a limitation of simple and small solar dryers. These conditions often make them impossible to use. By including storage systems (thermal accumulation) and/or auxiliary energy sources, drying processes or dehydration can be conducted continuously, even during periods of
Eng. Agríc.. Publicado em: 2020-04
-
9. QoS and QoE Aware Routing Protocol for Flying Ad-Hoc Surveillance Networks Using Fuzzy Inference Systems
Abstract The Flying Ad-hoc Network (FANET) networks have often operated in regions that are difficult to reach and have no fixed infrastructure. The use of devices such as Unmanned Aerial Vehicles (UAV) enable aerial networks to be created that are extremely fast, although there are no specific routing protocols for this type of network that can make communi
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-03
-
10. Modified Ring Power Divider Using Stepped-Impedance Resonator
Abstract In this paper, the design of a modified ring power divider dedicated for wideband communication or measurement systems is presented. The proposed power divider is built by using a conventional ring power divider and an additional Stepped-Impedance Resonator (SIR). The even-odd mode analysis is used to derive the design equations. In order to observe
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-03
-
11. DENSITY CALCULATIONS OF AQUEOUS AMINE SOLUTIONS USING AN EXCESS GIBBS BASED MODEL
Abstract Accurate representation of the physical properties of a solvent is essential for design and simulation of processes. Density and viscosity, for instance, have an important role in modelling and designing absorption and desorption towers. In the present work, a model to accurately calculate the density of aqueous amine solutions used in CO2 capture w
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
12. Modelling beef cattle production systems from the Pampas in Brazil to assess intensification options
ABSTRACT Traditional livestock productivity is hard to estimate, since it depends on a gamut of animal production indicators that are difficult to measure for many farms. Thus, we propose an analytical method for estimating productivity and understanding the importance of animal production indicators under different full-cycle cattle production systems in Br
Sci. agric. (Piracicaba, Braz.). Publicado em: 04/11/2019