Steel Structure
Mostrando 13-24 de 262 artigos, teses e dissertações.
-
13. Uma abordagem experimental e numérica para determinação de curvas de compressão para concreto simples e reforçados com fibras de aço
RESUMO A curva tensão-deformação do concreto é importante para o dimensionamento de estruturas, pois por meio dela é possível obter sua resistência à compressão, sua deformação de pico, o módulo de elasticidade e a tenacidade do concreto. Entretanto, essa é uma propriedade que não é comumente determinada nos ensaios de controle de qualidade do
Matéria (Rio J.). Publicado em: 16/09/2019
-
14. Some Aspects of Numerical Modeling of Steel-Concrete Composite Beams with Prestressed Tendons
Abstract Aspects about the numerical modeling of three-dimensional prestressed steel-concrete composite beams by using the finite element (FE) method are highlighted and commented in this work. Emphasis is given to the numerical treatment of bonded and unbonded tendons. The proposed modeling technique uses curved beam and catenary elements for simulating int
Lat. Am. j. solids struct.. Publicado em: 15/08/2019
-
15. Evaluation of the resistance of trussed slabs with steel formwork in cold formed U profile
Abstract In the last decades, the modernization in structural engineering has increased the use of steel-concrete composite and hybrid systems for slabs, when the adherence in the interface of the materials is present or not, respectively. In addition to the traditional steel deck, a similar solution for precast trussed slabs has been used for small construc
Lat. Am. j. solids struct.. Publicado em: 12/08/2019
-
16. Vibration control device for steel tubular towers of Horizontal Axis Wind Turbines
Abstract This paper presents and discusses the design of a vibration control device for a 120 m high steel tubular tower of onshore Horizontal Axis Wind Turbine (HAWT). The tower is modeled using beam (own code), and shell and solid finite elements (via ANSYS). The Dynamic Vibration Absorber (DVA) is designed to be attached to the tower top, aiming to analyz
Lat. Am. j. solids struct.. Publicado em: 10/07/2019
-
17. Experimental Studies on Shear Resistance Performances for the Shear key of H Shape Steel Spatial Grid Roofs
Abstract In this paper, a new type of structure was introduced. The spatial steel grid structure was composed of the top layer, lower layer H-shaped steel ribs and square steel tubes. The shear key is the key part of the structure.Based on the real dimensions of a practical prototype,two sets of full-scale shear key specimens were made, one of which has vert
Lat. Am. j. solids struct.. Publicado em: 27/06/2019
-
18. Role of multi-layer pyramidal truss cores as an inner material of energy absorbing structures
Abstract In this study, finite element analysis was performed to investigate the feasibility of multi-layered pyramidal truss structures as a filler material of energy absorbing tubes. Rectangular tubes with the filler and empty tubes were compressed at a constant velocity of 10km/h and their energy absorbing capabilities were compared to demonstrate the str
Lat. Am. j. solids struct.. Publicado em: 27/06/2019
-
19. Corrosão em estacas metálicas de torres de energia elétrica
RESUMO Para se manter a qualidade e continuidade do fornecimento de energia é essencial monitorar a integridade da estrutura das torres de transmissão usualmente executadas em aço. Por isso, avaliou-se a corrosividade do solo na região amazônica no trecho Vila do Conde-Tucuruí́, no estado do Pará. Foi analisado a resistividade, potencial estrutura-so
Matéria (Rio J.). Publicado em: 20/05/2019
-
20. Analyses of reinforced concrete beams strengthened with CFRP under bending: theorical and computational approaches
Resumo Este trabalho tem como objetivo compilar o embasamento teórico do ACI 440.2R:2008 [1] com o da NBR 6118:2014 [2] a fim de levar em consideração os conceitos da norma brasileira no dimensionamento à flexão de vigas reforçadas com PRFC (Polímeros Reforçados com Fibra de Carbono). A contribuição da norma brasileira é dada particularmente no qu
Rev. IBRACON Estrut. Mater.. Publicado em: 20/05/2019
-
21. Influência da densidade de potência e da porcentagem de N2 na atmosfera de deposição na dureza e no módulo de Young em filmes de aço inoxidável AISI 316 depositados por pulverização catódica
RESUMO O processo de recobrimento por pulverização catódica é uma técnica amplamente utilizada para produção de revestimentos metálicos e cerâmicos, devido a versatilidade no controle das propriedades com pequenas mudanças nos parâmetros de processo, como densidade de potência aplica ao cátodo magnetron e atmosfera de trabalho. Sendo assim, as p
Matéria (Rio J.). Publicado em: 20/05/2019
-
22. Uso do diafragma externo na ligação entre viga de seção I e pilar tubular de seção circular
Resumo O diafragma externo na ligação entre viga metálica de seção I e pilar metálico tubular de seção circular tem por objetivo o aumento na eficácia da transferência dos esforços. A proposta é dar alternativas ao uso desse sistema estrutural, reduzindo a limitação imposta por sua simples ligação ao se adicionar esse elemento, similar a um a
Ambient. constr.. Publicado em: 2019-03
-
23. Intumescent Coatings Based on Tannins for Fire Protection
Accidents involving fire occur every day around the world, affecting thousands of people and causing economic losses. Some accidents are caused by steel structure failures, which experience a significant reduction in mechanical properties at temperatures of 400-550˚C. Therefore, fire protective coatings are required for steel structures and interest in the
Mat. Res.. Publicado em: 04/01/2019
-
24. Passive vibration control using a metaconcrete thin plate
Abstract We investigated the band structure of flexural waves propagating in a metaconcrete thin plate, consisting of a concrete matrix reinforced by steel inclusions coated by rubber in square and triangular lattices. We considered the classical Kirchhoff-Love thin plate theory. We also studied the influence of inclusion geometry - circular, square and rota
Cerâmica. Publicado em: 2019-01