Steel Industry
Mostrando 25-36 de 230 artigos, teses e dissertações.
-
25. Mechanical strength of briquettes for use in blast furnaces
Abstract The demand for sustainable materials in the steel industry and the search for alternatives for the traditional ferriferous burdens utilized in siderurgy stimulated the development of this research. The briquetting process is a usual measure taken for recycling materials such as ironmaking waste (dust and sludge from blast furnaces), which can be reu
REM, Int. Eng. J.. Publicado em: 2019-03
-
26. Characterization of coal briquettes using tar as a binding material for use in a coke oven
Abstract In order to increase competitiveness in the steel industry through reduction of the cost of coal mixtures and increase in the quality productivity of coke in the oven, this research was developed with the aim of increasing the bulk density through briquetting of low power coking coal using tar as a binding material. Initially an industrial scale dou
REM, Int. Eng. J.. Publicado em: 2019-03
-
27. Protection of Grid Connected Photovoltaic Systems (GCPVS)
ABSTRACT Installations of photovoltaic systems connected or not to the electrical network have become increasingly popular, but it is often carried out by unqualified people using low quality components. The present study aims to describe the methodology adopted for the protection of grid connected photovoltaic systems (GCPVS) and the implications caused by
Braz. arch. biol. technol.. Publicado em: 29/10/2018
-
28. Characterization of Phase Transformations and Microstructural Changes in an API 5CT L80 Steel Grade During Ni Alloy Laser Cladding
The superficial coatings in micro-alloyed steel pipes has been a pointed way to decrease the corrosion problems in oil and gas industry. However, little emphasis has been given to the substrate. The effects of the deposition method on the steel microstructure and properties are still not well described. In this context, this work studied the effect of Ni sup
Mat. Res.. Publicado em: 26/07/2018
-
29. Síntesis y caracterización de “tanatos” de lantano como inhibidores de la corrosión
ABSTRACT Tannins are polyphenols synthesized by plants. They are found in Quebracho (Schinopsis Balansae) wood, Tara (Caesalpinia spinosa) fruits, etc. They have been incorporated in the coating industry as "antifouling" agents and as corrosion inhibitors in acidic solutions. Moreover, lanthanum solutions have a great inhibitory effect over SAE 1010 steel co
Matéria (Rio J.). Publicado em: 19/07/2018
-
30. Caracterización de soldaduras cuproaluminotérmica en cañerías de conducción para la protección catódica
ABSTRACT Copper-Aluminothermic weld is a process in which welder is generated by thermofusion. The necessary heat is obtained by the aluminum reducing effect above copper oxide, creating a high temperature exothermic reaction, in which melt and overheated copper is the filler material [1].This technique is used to joint rails in railway industry, in groundin
Matéria (Rio J.). Publicado em: 19/07/2018
-
31. Degradación de un efluente textil real asistida por Fe/PVA y materiales residuales magnéticos
ABSTRACT Organic compounds present on industrial wastes are mostly resistant to conventional biological and chemical treatments. Textile industry has presented several environmental problems mainly related to the use and management of water resources. It has a high consumption of potable and underground water in its processes. These wastewaters are one of th
Matéria (Rio J.). Publicado em: 19/07/2018
-
32. Vida a fatiga de uniones soldadas mediante PAW de aceros microaleados al boro
ABSTRACT In the last years microalloyed boron steels have been adopted in the automotive industry to achieve weight reductions. Namely, they are used as load-bearing elements such as pillars and reinforcements, in a quenched and tempered (QT) condition with tensile strength ranging from 800 to 1300 MPa. Dual-Phase (DP) steels have also been introduced in thi
Matéria (Rio J.). Publicado em: 19/07/2018
-
33. Optimización del proceso RSW para acero DP 1000
ABSTRACT In recent times new materials have been introduced in automobiles construction in order to reduce their weight and consequently fuel consumption and emissions level. Among them are Dual Phase (DP) steels, constituted by a ferritic matrix with martensite islands. Resistance Spot Welding (RSW) is the most commonly used welding process in the automotiv
Matéria (Rio J.). Publicado em: 19/07/2018
-
34. Evolución microestructural in-situ a alta temperatura de depósitos de soldadura de aceros 9Cr con diferentes contenidos de boro
ABSTRACT New alloys have been developed for enhancing the performance of the equipment used in thermoelectric power generation industry. With the objective of increasing the creep resistance of these materials, changes in the content of some microalloying elements were carried out. Boron bearing in creep strength enhanced 9Cr steel (CSE9Cr) welds improved ma
Matéria (Rio J.). Publicado em: 19/07/2018
-
35. Efecto de los parámetros de soldadura en mallas de acero electrosoldadas
ABSTRACT Reinforced concrete is the most widely used material in construction industry. Generally concrete is reinforced with ribbed bars. In certain applications, it is desirable to use welded mesh and are used in most reinforced concrete structures (buildings, roads, tunnels and prefabricated components). Welded mesh are generally electrowelded (PW: Projec
Matéria (Rio J.). Publicado em: 19/07/2018
-
36. Carbothermic reduction of Electric Arc Furnace Dust via thermogravimetry
Abstract Electric Arc Furnace Dust (EAFD) is a solid waste originated from electric steelmaking furnaces. Currently, according to some authors, there is an estimated generation of 15 to 25 kg of dust per ton of steel produced. The formation of the dust is related to the following steps of the process: furnace charge, metal volatilization, iron vaporization u
REM, Int. Eng. J.. Publicado em: 2018-07