Steel Industry
Mostrando 13-24 de 230 artigos, teses e dissertações.
-
13. Salmonella Enteritidis forms biofilm under low temperatures on different food industry surfaces
RESUMO: Avaliou-se o efeito da temperatura na capacidade de Salmonella Enteritidis (SE) formar biofilme em superfícies de aço inoxidável, polietileno e poliuretano e diferentes processos de higienização. Corpos de prova destes materiais foram postos frente a culturas de SE e incubados a 42±1 ºC, 36±1 ºC, 25±1 ºC, 9±1 ºC e 3±1 ºC por 4, 8, 12
Cienc. Rural. Publicado em: 10/07/2019
-
14. Structural Behaviour of Cold-Formed Steel of Double C-Lipped Channel Sections Integrated with Concrete Slabs as Composite Beams
Abstract Cold-formed steel (CFS) construction is widely recognised as an important contributor to sustainability and green construction. Thus, the use of CFS construction is encouraged and had been advanced by innovations in its structural applications. One such innovation that has recently gained popularity is the use of CFS sections in composite constructi
Lat. Am. j. solids struct.. Publicado em: 27/06/2019
-
15. Fatigue failure analysis of HSLA steel sheets holed by conventional and flow drilling processes
ABSTRACT Flow drilling process produces bushes for removable joints that can be threaded by forming tapping process, reducing stages in production of components of automobile industry and in construction sheds. High strength and low alloy steels (HSLA) are employed on several applications in the processing industry. Benefits provided by these materials make
Matéria (Rio J.). Publicado em: 10/06/2019
-
16. Effect of the Chemical Homogeneity of a Quenched and Tempered C-Mn Steel Pipe on the Mechanical Properties and Phase Transformations
Seamless steel pipes for application in the oil and gas industries are manufactured from quenched and tempered steel. Aiming to meet the required characteristics, it is necessary that the microstructure and the mechanical properties are homogeneous along the wall thickness of the pipes, which is even more critical for thick wall pipes. Considering the seamle
Mat. Res.. Publicado em: 03/06/2019
-
17. Dolomitic BIF beneficiation of Conceição - MG mine
Abstract In the Conceição - MG mine, there are significant reserves of dolomitic itabirite, which is considered overburden material. This study aimed to develop a flotation route for the concentration of this dolomitic BIF according to the requirements of the steel industry. The characterization of samples, comminution, liberation size, microflotation of t
REM, Int. Eng. J.. Publicado em: 2019-06
-
18. Impacto do BNDES na eficiência da indústria siderúrgica: aplicação do modelo Malmquist de dois estágios
Resumo Utilizando o modelo Malmquist de análise envoltória de dados (Data Envelopment Analysis - DEA) de dois estágios, este artigo busca avaliar como o Banco Nacional de Desenvolvimento Econômico e Social (BNDES) impacta o desempenho da indústria siderúrgica. Para tanto, são conduzidas a decomposição do índice de Malmquist e a regressão não line
Cad. EBAPE.BR. Publicado em: 30/05/2019
-
19. Influência da composição do gás de proteção nas tensões residuais de juntas de aço DP600 soldadas pelo processo GMAW
RESUMO A indústria automobilística vem investindo em novos processos de fabricação que melhoram a produtividade sem perda da qualidade. Entretanto, a presença de tensões residuais, geradas em todos os processos de fabricação, constitui um dos grandes problemas encontrados na indústria metal mecânica, pois estas podem se somar às tensões de carreg
Matéria (Rio J.). Publicado em: 20/05/2019
-
20. Performance of the INCONEL 625 alloy weld overlay obtained by FCAW process
ABSTRACT Nickel-based weld overlays (cladding) are commonly used in oil & gas industry to extend the life of equipment under corrosive environment, as it improves the corrosion resistance without a significant increase in the manufacturing cost, when compared to a full nickel-based alloy equipment. Although there are extensive literature involving overlays a
Matéria (Rio J.). Publicado em: 20/05/2019
-
21. Sanitizing cinnamaldehyde solutions against Pseudomonas aeruginosa biofilms formed on stainless steel surfaces
Resumo Pseudomonas aeruginosa é um patógeno oportunista capaz de formar biofilmes de grande relevância para a microbiologia médica e para a indústria de alimentos. Os constituintes do óleo essencial (OE) têm sido pesquisados como novas alternativas para o controle do biofilme. Neste estudo, o cinamaldeído mostrou-se eficaz como OE contra células pla
Braz. J. Food Technol.. Publicado em: 16/05/2019
-
22. Avaliação Microestrutural e Resistência à Corrosão de uma Junta Dissimilar entre um Aço de Alta Resistência e Baixa Liga e Aço um Inoxidável Duplex
Resumo A união entre materiais dissimilares tem sido amplamente aplicada na indústria de petróleo e gás. Em geral, este tipo de soldagem é mais sensível às diferenças de composição química existente entre os metais envolvidos. Diante dessa perspectiva, este trabalho tem por objetivo avaliar, por união autógena, a microestrutura de uma junta sold
Soldag. insp.. Publicado em: 16/05/2019
-
23. A New methodology of Nondestructive Testing for Quantitative Evaluation of Sigma Phase in Duplex Stainless Steels
Duplex Stainless Steels (DSSs) are widely used in the oil and gas industry. When the steel is subjected to a thermal gradient, as in welding may occur precipitation of intermetallic phases. Among these phases, there is the sigma phase, which even in small quantities reduces drastically the mechanical and corrosion resistance properties. According to some stu
Mat. Res.. Publicado em: 13/05/2019
-
24. Bond between steel and concrete made with ceramic waste aggregate
Abstract The reduction of natural resources combined with a substantial increase in the generation of solid waste in large urban centers, justifies the search for methods of reusing the construction industry waste. The ceramic industry has a high disposal rate during the manufacturing, transportation and eventual replacement of its products. In this case, re
REM, Int. Eng. J.. Publicado em: 2019-03