Steel Fiber Reinforced Concrete
Mostrando 13-24 de 46 artigos, teses e dissertações.
-
13. Influence of Fiber Properties on Shear Failure of Steel Fiber Reinforced Beams Without Web Reinforcement: ANN Modeling
Abstract In this paper, an artificial neural network (ANN-10) model was developed to predict the ultimate shear strength of steel fiber reinforced concrete (SFRC) beams without web reinforcement. ANN-10 is a four-layered feed forward network with a back propagation training algorithm. The experimental data of 70 SFRC beams reported in the technical literatur
Lat. Am. j. solids struct.. Publicado em: 2016-08
-
14. Workability Analysis of Steel Fiber Reinforced Concrete Using Slump and Ve-Be Test
This works present an experimental study addressing the workability of fiber reinforced concrete (FRC). Only conventional measurements, such as slump and Ve-Be test, were used to evaluate the effect of the fiber content in the mixture. The fiber content shows to be of great influence in the concrete mobility reducing the slump and increasing exponentially th
Mat. Res.. Publicado em: 03/11/2015
-
15. Shear Strengthening of RC Deep Beams with Sprayed Fiber-reinforced Polymer Composites (SFRP): Part 2 Finite Element Analysis
AbstractThis paper presents the finite element analysis conducted on SFRP strengthened reinforced concrete (RC) deep beams. The analysis variables included SFRP material (glass and carbon), SFRP thickness (3 mm and 5 mm), SFRP configuration and strength of concrete. The externally applied SFRP technique is significantly effective to enhance the ultimate load
Lat. Am. j. solids struct.. Publicado em: 2015-07
-
16. Prediction of energy absorption capability in fiber reinforced self-compacting concrete containing nano-silica particles using artificial neural network
The main objective of the present work is to utilize feedforward multi-layer perceptron (MLP) type of artificial neural networks (ANN) to find the combined effect of nano-silica and different fibers (steel, polypropylene, glass) on the toughness, flexural strength and fracture energy of concrete is evaluated.For this purpose, 40 mix plot including 4 series A
Lat. Am. j. solids struct.. Publicado em: 2014-11
-
17. Waste steel wires modified structural lightweight concrete
Nowadays, the use of different waste fibers in concrete has started to increase rapidly due to some reasons such as economic savings and positive effects on the environment. In this study, waste steel wires taken from reinforcement and formwork which were previously utilized in construction projects, were employed in structural lightweight concrete (SLWC). T
Mat. Res.. Publicado em: 28/07/2014
-
18. Prediction of combined effects of fibers and nanosilica on the mechanical properties of self-compacting concrete using artificial neural network
In this research, the combined effect of nano-silica particles and three fiber types (steel, polypropylene and glass) on the mechanical properties (compressive, tensile and flexural strength) of reinforced self-compacting concrete(SCC) is evaluated. For this purpose, 70 mixtures in A, B, C, D, E, F and G series representing 0, 1, 2, 3, 4, 5 and 6 percent of
Lat. Am. j. solids struct.. Publicado em: 2014
-
19. Ligação viga-pilar em elementos pré-moldados de concreto solidarizados por concreto reforçado com fibras de aço: análises estática e dinâmica / Beam-column connection in precast concrete structures using steel fiber reinforced concrete
No presente trabalho, utiliza-se concreto com fibras de aço, traspasse de armaduras e chaves de cisalhamento para desenvolver uma ligação viga-pilar capaz de resistir a ações cíclicas e dinâmicas e que possa ser empregada na pré-moldagem de estruturas de casas de força de usinas hidrelétricas. Para atingir este objetivo, inicialmente foram realizad
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/06/2012
-
20. Estudo da variabilidade da tenacidade de concretos reforçados com fibras de aço por meio de ensaios à flexão em prismas moldados e extraídos / Study of the variability of thoughness in steel fiber reinforced concrete by flexural tests in molded and
O concreto reforçado com fibras de aço (CRFA) tem seu principal campo de aplicação nos pisos industriais e pavimentos. Em função das características de redistribuição de esforços que apresentam tais estruturas - placas apoiadas sobre uma base elástica - é possível a substituição total das armaduras convencionais pelas fibras de aço, acelerand
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/03/2012
-
21. Compression specific toughness of normal strength steel fiber reinforced concrete (NSSFRC) and high strength steel fiber reinforced concrete (HSSFRC)
Compression toughness tests were carried out on concrete cylinders reinforced with three different aspect ratios of hooked-end steel fibers 60, 75, and 83 and six different percentages of steel fibers 0.5, 1.0, 1.25, 1.5, 1.75, and 2.0% by volume of concrete. The w/c ratio used for the normal strength steel fiber reinforced concrete mixes (NSSFRC) was 0.55,
Materials Research. Publicado em: 03/06/2011
-
22. Stress-strain curves for steel fiber-reinforced concrete in compression
This paper presents a study on the compressive behavior of steel fiber-reinforced concrete. In this study, an analytical model for stress-strain curve for steel fiber-reinforced concrete is derived for concretes with strengths of 40 MPa and 60 MPa at the age of 28 days. Those concretes were reinforced with steel fibers with hooked ends 35 mm long and with as
Matéria (Rio de Janeiro). Publicado em: 2010
-
23. Theoretical analysis of precast concrete beams with steel bars and polymer reinforced with glass fiber in aggressive environmental sites / Análise teórica de vigas pré-moldadas de concreto com armadura de aço e de polímero reforçado com fibra de vidro em meio altamente agressivo
This work studied the behavior of precast beams when subjected to shear stress according to the brazilian standard NBR 6118:2003 reinforced with steel bar compared to the american standard ACI 440.1R-06 when the structural member was reinforced with glass fiber reinforced polymer - GFRP pultruded bars. The goal of this work is to acquire subsidies to apply t
Publicado em: 2010
-
24. Estudo da aderência entre concreto e armadura: análise da influência das fibras de aço / Study of adhesion between concrete and reinforcement: influence of steel fibers
Bond between steel bars and concrete allows the use of reinforced concrete as a construction material. If the bond is appropriate, the cracks will be as little as possible, so the reinforcing bar will be protected by the surrounded concrete. Therefore, the aim of this research was to analyse the influence of steel fiber on mechanical properties of concrete a
Publicado em: 2010