Steady State Simulation
Mostrando 13-24 de 117 artigos, teses e dissertações.
-
13. Otimização e dinâmica dos fluidos computacional aplicadas a turbinas eólicas
The present work consists in the application of optimization methods and computational fluid dynamics to wind turbines. The massive growth in renewable energies demands more powerful turbines and more accuracy in their design and analysis. This work has three objectives: optimization of an airfoil for wind turbines, simulation of a wind turbine airfoil in de
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012
-
14. Modelagem e simulação de reatores autoclave para produção de PEBD
The low density polyethylene (LDPE) is a thermoplastic resin manufactured by high pressure processes, with autoclave or tubular type reactors. The present scenario is of growing demand for LDPE produced at competitive costs, through high performance and capacity plants, so that the process and product development becomes a key factor for the producers, and p
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012
-
15. Modelagem e simulação do processo de fermentação extrativa a vácuo com uma câmara de flash e separação do CO2 utilizando uma coluna de absorção / Modeling and simulation of the vacuum extractive fermentation process using a flash chamber and an absorption column for CO2 separation
The ethanol, also known as bioethanol, shows positive characteristics for being used as a large scale fuel, mainly because of the relatively low cost, low pollutant impact compared to fossil fuels and its feasibility of being produced from a renewable matrix through fermentation of vegetable origin products. The conventional fermentation process is typically
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 07/07/2011
-
16. Simulação do processo de adsorção psa para separação da mistura etanol-água / Simulation of the adsorption process psa for separation of ethanol-water mixtures
One of the problems with ethanol production is the high energy cost which is associated with the separation of ethanol due to of excess water and the existence of an azeotrope in the mixture ethanol-water, by conventional distillation the mixture can be separated up to 95% weight. Currently, there is great interest in the development of technological process
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 04/07/2011
-
17. Estudo da cinética e do equilíbrio da adsorção da cefamicina C em resina de troca iônica e simulação do processo contínuo
The cephamycin C (CefC) is a beta-lactam antibiotic produced from submerged and aerated cultures of Streptomyces clavuligerus. Acts as inhibitor of cell wall formation of Gram-negative bacteria and is resistant to the hydrolytic action of betalactamases enzymes. The literature presents few scientific results published regarding the purification of CefC, and
Publicado em: 2011
-
18. Systematic methodology and property prediction of fatty systems for process design/analysis in the oil and fat industry
A systematic model based methodology has been developed and its application highlighted through the solvent recovery section of a soybean oil extraction process, with emphasis on the effect of design variables on the process performance. First, the most representative compounds present in the vegetable oil were defined. Basic and critical properties were the
Brazilian Journal of Chemical Engineering. Publicado em: 2010-09
-
19. Aperfeiçoamentos no código computacional RAIOS incluindo aurilização / RAIOS computer code improvements including auralization
In this work, the most important improvements implemented in the computer code of numeric simulation of room acoustics, called RAIOS, are presented. These improvements are divided in four groups: Data importation process from DXF les; implementation of new acoustic quality parameters and steady state sound pressure level calculation; modications in order to
Publicado em: 2010
-
20. The stochastic modeling applied to the maintenance of cultural diversity / A modelagem estocástica aplicada à manutenção da diversidade cultural
The sociocultural stochastic modeling introduced by Robert Axelrod is traditionally referred to as the maintenance of cultural diversity. Since it generates the appearance of heterogeneities on a steady state, even the primordial interaction tends to gauge the interactors. Due to its simplicity, numerous interpretations of this model were studied, as well as
Publicado em: 2010
-
21. MODELO HIDRÁULICO BASEADO NO MÉTODO DAS CARACTERÍSTICAS E ALGORITMOS GENÉTICOS PARA OTIMIZAÇÃO DA OPERAÇÃO DE REDES DE ABASTECIMENTO DE ÁGUA E DE ESTAÇÕES DE BOMBEAMENTO
A hydraulic model was developed for simulation of water supply networks using the Method of Characteristics (MOC), introducing new features to the CALHIDREDMT model, proposed by Righetto (1994). The model uses the concept of pseudo-transient, using a fictitious value for the wave celerity. Simulations were performed in networks equipped with reservoirs, tank
Publicado em: 2010
-
22. Can a habit formation model really explain the Forward Premium Anomaly?
Verdelhan (2009) shows that if one is to explain the foreign ex- change forward premium behavior using Campbell and Cochrane (1999) s habit formation model one must specify it in such a way to generate pro-cyclical short term risk free rates. At the calibration procedure, we show that this is only possible in Campbell and Cochrane s frame- work under implaus
Publicado em: 07/08/2009
-
23. Can a Habit Formation Model really explain the forward premium anomaly?
Verdelhan (2009) shows that if one is to explain the foreign exchange forward premium behavior using Campbell and Cochrane (1999)'s habit formation model one must specify it in such a way to generate pro-cyclical short term risk free rates. At the calibration procedure, we show that this is only possible in Campbell and Cochrane's framework under implausible
Publicado em: 12/05/2009
-
24. Potential performance of SiC and GaN based metal semiconductor field effect transistors
A Monte Carlo simulation has been used to model steady-state electron transport in SiC and GaN field effect transistor. The simulated device geometries and doping are matched to the nominal parameters described for the experimental structures as closely as possible. Simulations of SiC MESFETs of lengths 2, 2.6 and 3.2 µm have been carried out and compared t
Brazilian Journal of Physics. Publicado em: 2009-03