Stainless Steel Welding
Mostrando 1-12 de 84 artigos, teses e dissertações.
-
1. Analysis of Residual Stress by the Hole-Drilling Method and Hardness in Dissimilar Joints of Austenitic Stainless Steel AISI 316L and Inconel 718 Alloy by Autogenous GTAW Process
Stainless steel and nickel alloy have high corrosion resistance in high-temperature environments due to the high Cr content present in their chemical composition, being widely used in components of nuclear reactors, petrochemical industries, etc. Through proper processes and procedures, it becomes possible to join these alloys. However, this union can genera
Mat. Res.. Publicado em: 02/12/2019
-
2. Resistência à Corrosão de Juntas Dissimilares dos Aços AISI 316L e da Liga Inconel 718
Resumo A soldagem dissimilar (Dissimilar Metal Welds – DMWs), união de dois diferentes materiais metálicos, tem muitas aplicações industriais, com destaque para trocadores de calor nas usinas nucleares. Portanto, devem resistir à corrosão e a esforços mecânicos, entre outros requisitos. Neste trabalho foi abordada a susceptibilidade à corrosão d
Soldag. insp.. Publicado em: 21/10/2019
-
3. Influence of Nb Content on Sensitization and Pitting Corrosion of Welded AISI 430 Ferritic Stainless Steel
Resumo Neste trabalho, o efeito da adição de Nb na sensitização e corrosão por pite de aço inoxidável ferrítico AISI 430 submetido à soldagem TIG foi investigado por caracterização microestrutural e técnicas eletroquímicas. As três regiões distintas do processo de soldagem, zona fundida, zona termicamente afetada e metal de base do aço AISI
Soldag. insp.. Publicado em: 07/10/2019
-
4. Experimental Thermal Analysis in Rotary Friction Welding of Dissimilar Materials
ABSTRACT: Rotary friction welding process (RFW) is one of the most used processes in the world for manufacturing bimetallic components that require high mechanical strength. All process occurs in solid state at temperatures below the melting point of the involved materials, having as the main bonding mechanisms the diffusion and mechanical mixture. The purpo
J. Aerosp. Technol. Manag.. Publicado em: 23/09/2019
-
5. Effect of Sigma Phase Precipitated at 850 °C on Corrosion Behaviour of UNS S82441 Duplex Stainless Steel
ABSTRACT Duplex stainless steels (DSS) are alloys with binary microstructure consisting of ferrite (δ) and austenite (γ), combining high mechanical properties and corrosion resistance by pitting and stress corrosion, due to the two phases austenite/ferrite. However, the formation of secondary and intermetallic phases, during solidification processes, heat
Matéria (Rio J.). Publicado em: 16/09/2019
-
6. Corrosion Behavior of 316L and Alloy 182 Dissimilar Weld Joint with Post-Weld Heat Treatment
ABSTRACT Austenitic stainless steel and nickel-base alloys welds are widely used in nuclear reactor components, plants of energy generation, chemical, and petrochemical industries, due to their high corrosion resistance. The post weld heat treatments (PWHT) are generally applied to welding in order to relieve the welding residual stress. The aim of this work
Matéria (Rio J.). Publicado em: 16/09/2019
-
7. Avaliação da susceptibilidade de precipitação da fase sigma na soldagem do aço inoxidável duplex SAF2205
RESUMO A soldagem de aços inoxidáveis duplex é uma operação crítica, devido aos ciclos térmicos aos quais o material é submetido, que podem favorecer a precipitação de fases deletérias. Nesse contexto, objetivo dessa pesquisa é analisar a influência da energia de soldagem na susceptibilidade à formação de fase sigma no aço duplex SAF2205. As
Matéria (Rio J.). Publicado em: 16/09/2019
-
8. Effect of Nitrogen Addition to Shielding Gas on Cooling Rates and in the Microstructure of Thin Sheets of Duplex Stainless Steel Welded by Pulsed Gas Tungsten Arc Welding Process
The effect of the nitrogen content in the shielding gas and its effect on temperature distributions at the welded zone of thin sheets of duplex stainless steel have been evaluated. The duplex stainless steels have many features due to unique microstructural combination of austenite and ferrite grains. The phase balance can be easily shifted depending on the
Mat. Res.. Publicado em: 26/08/2019
-
9. Keyhole GTAW with Dynamic Wire Feeding Applied to Orbital Welding of 304L SS Pipes
Resumo Atualmente, no cenário brasileiro de óleo e gás a execução dos processos de soldagem para aços inoxidáveis consiste em sua grande maioria de aplicações manuais, dificultando qualquer aumento de produtividade e repetibilidade dos processos. Portanto, a automação desta etapa permite grandes avanços com resultados mais confiáveis, menores c
Soldag. insp.. Publicado em: 15/08/2019
-
10. Microstructural Evolution Due to One Thermal Cycle in a Superduplex Stainless Steel ASTM A890/A890M - Grade 6A in the As-Weld and Post-Weld Heat Treatment Conditions
During welding of the superduplex stainless steels are exposed to thermal cycles, allowing precipitation of deleterious phases as well as unbalance as the ferrite and austenite phases. This work analyzed the microstructural changes taking place on a plate ASTM A890/A890M - grade 6A steel submitted to arc welding one welding of pass conducted on a flat surfac
Mat. Res.. Publicado em: 08/08/2019
-
11. Nitretação a plasma da junta soldada do aço inoxidável super duplex SAF 2507
RESUMO Os aços inoxidáveis superduplex (AISD) apresentam em sua microestrutura as fases ferrita e austenita, de modo a conciliar boas propriedades mecânicas e de resistência à corrosão. Estes materiais possuem grande aplicação na indústria de extração de petróleo e na petroquímica. Quando estão sujeitos a estas aplicações, os dutos de AISD so
Matéria (Rio J.). Publicado em: 20/05/2019
-
12. Avaliação Microestrutural e Resistência à Corrosão de uma Junta Dissimilar entre um Aço de Alta Resistência e Baixa Liga e Aço um Inoxidável Duplex
Resumo A união entre materiais dissimilares tem sido amplamente aplicada na indústria de petróleo e gás. Em geral, este tipo de soldagem é mais sensível às diferenças de composição química existente entre os metais envolvidos. Diante dessa perspectiva, este trabalho tem por objetivo avaliar, por união autógena, a microestrutura de uma junta sold
Soldag. insp.. Publicado em: 16/05/2019