Solid Residue
Mostrando 1-12 de 212 artigos, teses e dissertações.
-
1. Development of a Disposable Pipette Extraction Method Using Coffee Silverskin as an Adsorbent for Chromium Determination in Wastewater Samples by Solid Phase Extraction
A procedure using disposable pipette tips adapted for solid-phase extraction, known as DPX SPE, was used as an alternative way for the chromium determination in wastewater samples. DPX-SPE consists of a device which allows a dynamic contact between the sample and the solid-phase. A residue obtained from the processing of coffee beans, denominate coffee silve
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. An alternative route to extract nickel and cobalt from non-commercial laterite ore
Abstract Laterite ores, which represent around two-thirds of nickel reserves, became an important source of nickel and cobalt metals. The objective of the present study was to investigate the efficiency of a hybrid route to extract nickel and cobalt present in a laterite ore sample which was not commercially attractive to be processed through the current rou
REM - International Engineering Journal. Publicado em: 2022
-
3. A Simple and Efficient Optimized Solid-Liquid Extraction with Low Temperature Partition Procedure for Dissipation and Translocation Study of Pesticide Residues in Rice Grains
Pesticides are used globally to protect food against pest attack. This study evaluates the dissipation of bifenthrin and deltamethrin residues in unhulled rice and the translocation of these insecticide residues in husked rice stored at 25 °C in a biochemical oxygen demand (BOD) incubator for 35 days. For pesticide determination, the simple and efficient so
J. Braz. Chem. Soc.. Publicado em: 2020-10
-
4. Characterization of the solid residue generated in the detoxification step of sugarcane bagasse hemicellulosic hydrolysate and behavior in agricultural soils
ABSTRACT Overliming is an effective way of neutralizing and reducing the toxicity of the hydrolysates generated from acidic pretreatment of lignocellulosic biomass for ethanol production and others biotechnological products. Overliming generates a solid residue whose inadequate disposal may represent an environmental problem. This work aimed at the chemical
Bragantia. Publicado em: 2020-03
-
5. New Proposal for Sugarcane Vinasse Treatment by Hydrothermal Carbonization: An Evaluation of Solid and Liquid Products
Vinasse is a residue of ethanol production from sugarcane. In view of the problems associated with its disposal, this study aimed to propose a treatment for vinasse by hydrothermal carbonization. The influence of temperature (100 to 200 ºC), acidity (1.7 to 8.3%) and reaction time (12 to 48 h) on the hydrothermal treatment was evaluated, as well the charact
J. Braz. Chem. Soc.. Publicado em: 2020-01
-
6. CONVERSION OF SPENT FAT OIL INTO LIQUID AND GASEOUS FUELS THROUGH CLINKER CATALYZED PYROLYSIS
Abstract Repeated heating of fat oil may result in the formation of highly toxic aldehyde compounds. The oils having such compounds are considered as health hazards and therefore their repeated use is banned in many countries. Since huge quantities of the used oil need urgent disposal, this work is focused on the disposal of used oil for the resource recover
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
7. Duplo Benefício Ambiental pela Remoção de Corantes Fotosensibilizadores da Água com Uso de Resíduo Sólido Particulado
RESUMO As indústrias têxteis estão entre os setores mais poluidores do mundo, principalmente pelo descarte de resíduos de corantes sintéticos nos efluentes. Alguns processos têm sido utilizados atualmente para a remoção de corantes dos efluentes, mas apresentam as desvantagens de baixa viabilidade econômica e dificuldade de reprodução em larga esc
Matéria (Rio J.). Publicado em: 16/09/2019
-
8. Estudo comparativo do tingimento de malha PES/CO com água tratada com resíduo de clarificação de óleo vegetal, na forma natural e calcinada
RESUMO A indústria têxtil utiliza um grande volume de água, o que torna necessário encontrar opções mais sustentáveis para o seu uso, como a reutilização em novos tingimentos. O uso de um resíduo industrial sólido, como adsorvente, poderá ser uma alternativa para tratar o efluente têxtil. Este estudo teve como objetivo testar a viabilidade do re
Matéria (Rio J.). Publicado em: 16/09/2019
-
9. Influência da manta geotêxtil e altura da camada de lodo no desaguamento de lodo anaeróbio em leito de drenagem
RESUMO As estações de tratamento de esgoto (ETEs) geram resíduos, com destaque para o lodo de esgoto, que tem aproximadamente 95% de água e se classifica como resíduo sólido, necessitando de disposição final ambientalmente adequada. Assim, o desaguamento é fundamental no gerenciamento do lodo, já que promove redução de volume. O leito de drenagem
Eng. Sanit. Ambient.. Publicado em: 15/08/2019
-
10. Production and Characterization of the Bio-Oil Obtained by the Fast Pyrolysis of Spent Coffee Grounds of the Soluble Coffee Industry
Agro-industrial wastes are abundant and low-cost sources of energy and chemicals. Biomass account for 14% of the world’s energy production. Industrial residues of production of soluble coffee (spent coffee grounds - SCG) have great potential due to its large-scale production and can be transformed by pyrolysis, in liquid, solid and gaseous products with ap
J. Braz. Chem. Soc.. Publicado em: 12/08/2019
-
11. Caracterização da cinza de caroço de açaí residual para adição ao concreto
Resumo Os problemas ambientais são uma realidade do mundo atual e vêm associados ao crescimento urbano e populacional, com pouco ou nenhum planejamento. O setor da construção civil é um dos maiores consumidores de recursos naturais e gerador de resíduos sólidos. Assim, é interessante pensar em uma maneira de incorporar materiais que hoje são conside
Ambient. constr.. Publicado em: 2019-03
-
12. Impacto do uso de resíduo de vermiculita no estado endurecido de argamassas
Resumo No processo de beneficiamento da vermiculita é gerado um resíduo fino para o qual atualmente ainda não foi desenvolvida uma aplicação que possibilite a utilização em larga escala. Uma alternativa que vem sendo estudada é a associação com cimento Portland em composições de argamassas e concretos, em função da composição química do res�
Cerâmica. Publicado em: 2019-01