Solar Collector
Mostrando 1-12 de 41 artigos, teses e dissertações.
-
1. Omni-Directional Wideband Antenna Array with Solar Cells
Abstract Distributed sensor networks are becoming more and more widespread due to their substantial benefits to our daily lives. These sensors, in most cases, are distributed in nature and even may require mobility. This, in turn, implies omnidirectional collector units to collect the data from various sensors at arbitrary directions. This work summarizes th
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-03
-
2. HYBRID SYSTEM SIMULATION TO SUPPLY HEATED AIR TO A SOLAR FOOD DRYER
ABSTRACT The intermittence of solar radiation, due to continuous rainy or cloudy days, is a limitation of simple and small solar dryers. These conditions often make them impossible to use. By including storage systems (thermal accumulation) and/or auxiliary energy sources, drying processes or dehydration can be conducted continuously, even during periods of
Eng. Agríc.. Publicado em: 2020-04
-
3. HYBRID SOLAR HEAT PUMP SYSTEM FOR WATER HEATING
ABSTRACT A comparative test of water heating between the hybrid system - solar collector with heat pump - and a system with conventional supplementary heating - with high electric power - was performed. For this, a small capacity heat pump was installed, which was later installed together with a solar heating system, composed of a 250 L thermal reservoir and
Eng. Agríc.. Publicado em: 12/08/2019
-
4. Kinetics drying of silver banana (Musa spp.) in hybrid dryer
RESUMO A busca pela redução de custos de produção e diversificação de comercialização de produtos agrícolas torna-se necessária para autonomia e aumento de renda dos produtores rurais. A utilização de secadores solares para produção de frutas secas consiste em excelente alternativa a ser adotada. No entanto, para a introdução desta tecnologia
Rev. Ciênc. Agron.. Publicado em: 04/07/2019
-
5. Characterization of new selective coatings, made of granite and chrome, for solar collectors
ABSTRACT The depletion of fossil fuel reserves and climate change caused by atmospheric pollution has led the human being to seek alternatives that are less damaging to the environment. The concern and the awareness of the population open space for the study of renewable energies to be deepened, among them the best use of solar energy. The use of alternative
Matéria (Rio J.). Publicado em: 10/06/2019
-
6. Selective Solar Surface Solar Based on Black Chromium: Influence of Electrodeposition Parameters in the Absorption of Surfaces
The search for the reduction of costs for the implementation of renewable energies implies in the optimization of the parameters of the manufacturing processes of consolidated technologies. Among these technologies are the solar collectors composed of absorber films characterized by high absorption in the spectrum range corresponding to solar radiation and l
Mat. Res.. Publicado em: 25/02/2019
-
7. Programa de simulação de sistemas de aquecimento Solar. / A software for simulation of solar heating systems.
This paper presents the development of a software that simulates the thermal performance of a solar water heating system with forced circulation, suitable for buildings. The implemented model computes the mass and energy balance in the thermal tank every hour. Its input data are values from a typical meteorological year of a chosen location and the hot water
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/09/2012
-
8. SimulaÃÃo e avaliaÃÃo de um sistema de aquecimento solar de Ãgua utilizando balanÃo energÃtico / Simulation and evaluation of a system of solar water heating using energy balance
This work was developed at the State University of West of Paranà â UNIOESTE, campus de Cascavel and was aimed at developing a computer program to simulate and scale, optimally, a system of solar water heating. To determine the efficiency parameters of the system were installed three solar collectors of 1.05 m2 each, brand Pro Sol, coupled to a thermal res
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 17/02/2012
-
9. APROVEITAMENTO DE FONTES ALTERNATIVAS PARA REDUÇÃO DO CONSUMO DE ENERGIA ELÉTRICA E REFLEXOS NOS SEUS CUSTOS / UTILIZATION OF ALTERNATIVE SOURCES FOR REDUCING POWER CONSUMPTION AND ITS CONSEQUENCES IN COSTS
Residential consumption accounts for around one third of total energy consumed in Brazil. The electric shower is the main component of this consumption, along with air conditioning. Hence, much research has been conducted in order to reduce the consumption of this sector and the use of alternative energy sources. Among these include mainly solar and geotherm
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 17/09/2011
-
10. ObtenÃÃo, caracterizaÃÃo e aplicaÃÃo de uma nova superfÃcie Seletiva para coletores solares tÃrmicos / Acquisition, Characterization and Application of a New Selective Surface for Solar Thermal Collectors
O estudo de superfÃcies seletivas para coletores solares tÃrmicos, hà alguns anos, enfoca o uso de pastas e tintas para recobrir chapas de cobre ou alumÃnio, formando a placa absorvedora do coletor. Essas tintas ou pastas sÃo eletrodepositadas em placas metÃlicas, sendo este processo muitas vezes responsÃvel pelo levado custo de superfÃcies seletivas
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 11/03/2011
-
11. Construção e analise de desempenho de um sistema de aquecimento solar de água utilizando placa de policarbonato como superfície absorvedora
Estudou-se um sistema para aquecimento de água a ser utilizada para obtenção de água destinada ao banho em residências, a superfície absorvedora do coletor é formada por uma placa de policarbonato. A placa de policarbonato tem 6 mm de espessura, 1.050 mm de largura e 1.500 mm de comprimento com área correspondente a 1,575 m2. A placa foi ligada pelas
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 20/10/2010
-
12. Análise do desempenho térmico de um sistema de aquecimento solar de baixo custo
Apresenta-se um coletor solar a ser utilizado em um sistema para aquecimento de água destinada ao banho, cujas principais características são o baixo custo e fáceis processos de fabricação e montagem. O sistema funciona em regime de convecção natural ou termosifão. A superfície absorvedora do coletor é formada por doze tubos de PVC de 25 mm de di�
Publicado em: 2010