Sol Gel Method
Mostrando 1-12 de 180 artigos, teses e dissertações.
-
1. Tailoring the properties of Y2O3 via synthesis parameters varied during the PVA-assisted sol-gel route
Abstract The effect of synthesis parameters on the microstructural behavior and morphology during the yttrium oxide (Y2O3) formation is reported. Y2O3 crystals were produced by a modified sol-gel route assisted by polyvinyl alcohol solution varying the calcination temperature and solution pH. The crystalline phase formation was investigated using X-ray powde
Cerâmica. Publicado em: 2023
-
2. Bioactive SiO2-K2O-CaO-P2O5 glass-ceramic scaffold prepared using polyurethane foam template
Abstract A glass-ceramic in the SiO2-K2O-CaO-P2O5 quaternary system was prepared by substituting the Na2O component with K2O to avoid Na2Ca2Si3O9 formation upon thermal treatment since this phase decreases apatite formation kinetics on glass material. To form the glass-ceramic, a modified sol-gel method involving solution precipitation, followed by reagents
Cerâmica. Publicado em: 2023
-
3. Biphasic 0.8BaTiO3/0.2Ni(1-x)CoxFe2O4 nanopowders by in situ sol-gel synthesis
Abstract Nanopowders of the 0.8BaTiO3/0.2Ni(1-x)CoxFe2O4 (x=0, 0.25, 0.5, 0.75, and 1) were synthesized by the in situ sol-gel method using poly(acrylic acid) (PAA1800) as a chelating agent. The synthesis developed using PAA1800 ensured the simultaneous crystallization of two phases. The results provided a reliable method for producing biphasic nanopowders i
Cerâmica. Publicado em: 2022
-
4. X-ray line profile analysis and magnetic and optical properties of FexZn0.95-xCr0.05O nanoparticles fabricated by sol-gel route
Abstract FexZn0.95-xCr0.05O nanoparticles have been obtained for the different concentrations of Fe ions by using the sol-gel method. The hexagonal wurtzite structure of all the samples was confirmed by Rietveld refined X-ray diffraction patterns. The addition of Fe ions decreased lattice constants a and c from 3.2487 to 3.2474 Å and 5.2043 to 5.2029 Å, re
Cerâmica. Publicado em: 2022
-
5. Designing and fabrication of a low-cost dip-coater for rapid production of uniform thin films
In this work, a self-made dip-coater equipment was developed for the fabrication of thin films. The assembly of the apparatus was carried out using simple mechanical and electronic pieces, recycle parts, and spending an inexpensive budget suitably. The production, software design, and features of the device were focused on the sol-gel dip-coating method, whi
Química Nova. Publicado em: 2022
-
6. Biogenic synthesis of silver nanoparticles from thyme extract for functionalization of a bioactive glass produced from rice husk ash
Abstract The rice husk, agro-industrial residue, stands out for having silica, the main oxide former of the bioactive glass. To avoid contamination in this biomaterial, substances with bactericidal properties, like silver can be incorporated. Thus, the objective of this work is the synthesis of silver nanoparticles to functionalize a bioactive glass synthesi
Cerâmica. Publicado em: 2022
-
7. Study of Crystallization and Composition on Silicon Oxycarbide (SiOC) and Silicon Boron Oxycarbide (SiBOC) Ceramics Obtained from Alkoxysilanes Precursors
This work deals on the preparation of silicon oxycarbide (SiOC) and silicon boron oxycarbide (SiBOC) ceramics from pyrolysis involving alkoxysilanes with different organic groups. Boron content, organic substituent and annealing time were evaluated on crystallization and composition of resulting ceramics. B-free precursors composed of methyltriethoxysilane (
J. Braz. Chem. Soc.. Publicado em: 2021-06
-
8. Magnetic and Mesoporous Silica-Niobia Material as Modifier of Carbon Paste Electrode for p-Nitrophenol Electrochemical Determination
In the present work, the sol-gel synthesis method was employed as strategy to obtain a magnetic and mesoporous silica-niobia material. The planned synthesis was based on the hetero-condensation of niobium and silicon alkoxide precursors, in the presence of spherical magnetite particles. The resulting material presented interesting characteristics such as mag
J. Braz. Chem. Soc.. Publicado em: 2021-03
-
9. Synthesis of ZnO Nanoparticles by the Sol-Gel Protein Route: A Viable and Efficient Method for Photocatalytic Degradation of Methylene Blue and Ibuprofen
The photocatalytic degradation of methylene blue dye and ibuprofen drug was studied in the presence of zinc oxide, synthetized by the protein sol-gel route. The catalyst, calcined at 1000 ºC, presented a tendentious morphology to filaments characteristic of ZnO crystalline, characterized by X-ray diffraction (XRD) and confirmed by the presence of Zn energy
J. Braz. Chem. Soc.. Publicado em: 2020-08
-
10. Synthesis, Characterization and Photocatalytic Activity of Au/SiO2@TiO2 Core-Shell Microspheres
By using HAuCl4 as the gold precursor, spherical Au@SiO2/TiO2 core-shell nanostructures were prepared with the sol-gel method and ethanol reflux. The preparation process was convenient and fast. The obtained samples were characterized by UV-Vis, X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TE
J. Braz. Chem. Soc.. Publicado em: 2020-03
-
11. PMMA-SiO2 Organic-Inorganic Hybrid Coating Application to Ti-6Al-4V Alloy Prepared through the Sol-Gel Method
Siloxane-poly(methyl methacrylate) (PMMA) hybrid was synthesized based on the sol-gel method and applied to Ti-6Al-4V through dip-coating. The structural feature of the hybrid was subjected to Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TG); its morphological properties were analyzed through scanning electron microscope (SE
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
12. CATALYST PREPARATION METHODS TO REDUCE CONTAMINANTS IN A HIGH-YIELD PURIFICATION PROCESS OF MULTIWALLED CARBON NANOTUBES
Abstract CoMo/MgO catalysts with low loading of cobalt and molybdenum were prepared by incipient wetness impregnation and the sol-gel method for high yield production of carbon nanotubes (CNT). A detailed characterization of the catalysts, as-produced CNT and purified CNT, indicated a relationship between carbon nanotube properties, synthesis and purificatio
Braz. J. Chem. Eng.. Publicado em: 13/01/2020