Softening Curve
Mostrando 1-7 de 7 artigos, teses e dissertações.
-
1. Experimental study of brass properties through perforation tests using a thermal chamber for elevated temperatures
Abstract Experimental analysis on standard brass alloy has been carried out using a high pressure gas gun. Perforation tests have been performed for a variety of impact velocities from 40 to 120 m/s in order to study the material behaviour and to define failure modes. The main aim of the study has been to provide results using an innovative thermal chamber t
Lat. Am. j. solids struct.. Publicado em: 22/10/2018
-
2. Computational Modelling of RC Slabs Cracking with an Embedded Discontinuity Formulation
Abstract This paper investigates the cracking process of reinforced concrete slabs subjected to vertical load, involving their crack pattern and the load-displacement capacity curve. Concrete was discretized with hexahedral finite elements with embedded discontinuities; whereas steel reinforcement was represented by 3D bar elements, placed along the edges of
Lat. Am. j. solids struct.. Publicado em: 2015
-
3. A characterization for the flow behavior of as-extruded 7075 aluminum alloy by the improved Arrhenius model with variable parameters
In order to perform the numerical simulations of forging response and establish the processing parameters for as-extruded 7075 aluminum alloy, the compressive deformation behavior of as-extruded 7075 aluminum alloy were investigated at the temperatures of 573 K, 623 K, 673 K and 723 K and the strain rates of 0.01 s-1, 0.1 s-1, 1 s-1 and 10 s-1 on a Gleeble15
Mat. Res.. Publicado em: 13/11/2012
-
4. Avaliação do amaciamento em aço inoxidável ferrítico por ensaios de torção a quente
The softening behavior changes that occur during hot deformation of ABNT 430 ferritic stainless steels were analyzed by hot rolling simulation using torsion tests aiming at achieving better microstructure for drawing process. Torsion specimens were machined from hot rolled plates 28mm in thickness after roughing mill. Interrupted deformation torsion tests we
Publicado em: 2008
-
5. Análise numérico-experimental de estruturas de concreto com utilização da energia de fraturamento / Numerical-experimental analysis of concrete structures using the fracture energy
A evolução dos concretos utilizados nas últimas décadas deu origem ao Concreto de Alto Desempenho (CAD), que tem, entre suas características, alta resistência à compressão e baixa permeabilidade. Com o desenvolvimento dos produtos químicos utilizados na construção civil, em especial os superplastificantes e superfluidificantes, a utilização dess
Publicado em: 2007
-
6. Numerical-experimental analysis of concrete structures using the fracture energy / Análise numérico-experimental de estruturas de concreto com utilização da energia de fraturamento
The evolution of the concrete mixes used during the last decades gave birth to the High Performance Concrete (HPC), which, among its main characteristics, presents high strength and low permeability. With the development of chemical products used in civil engineering constructions, mainly the superplasticizers, the use of this kind of concrete has become mor
Publicado em: 2007
-
7. RETRAÇÃO, FLUÊNCIA E FRATURA EM COMPÓSITOS CIMENTÍCIOS REFORÇADOS COM POLPA DE BAMBU / SHRINKAGE, CREEP AND FRACTURE OF CEMENTITIOUS COMPOSITES REINFORCED WITH BAMBOO PULP
The application of cimentitious composites using vegetal fibers in substitution of asbestos is a worldwide fact in the fiber cement industry. Despite their good mechanical properties and durability, the use of asbestos fibers causes well-known health hazards. Although vegetal fibers have relatively poor mechanical properties compared with synthetic fibers, t
Publicado em: 2006