Sisal Fiber
Mostrando 13-24 de 44 artigos, teses e dissertações.
-
13. On the Strengthening of Cement Mortar by Natural Fibers
The purpose of this work is to evaluate mechanical behavior of sisal fiber reinforced cement mortar. The composite material was produced from a mixture of sand, cement and water. Sisal fibers were added to the mixture in two different lengths. Mechanical characterization of the composite and the plain mortar was carried out using three point bend, compressio
Mat. Res.. Publicado em: 2015-02
-
14. Compressive stress-strain behaviour of cement mortar-composites reinforced with short sisal fibre
To design building elements using sisal fibre reinforced mortar composites, the stress-strain curves of the composites both under tensile and compression load is needed. In this study short sisal fibre-cement based composites were developed and their stress-strain behaviour under compression characterized experimentally. The composites consisted of two morta
Mat. Res.. Publicado em: 05/11/2013
-
15. Mechanical characterization of sisal fiber-reinforced recycled HDPE composites
The increasing awareness of the environment protection has contributed to concerns regarding alternative procedures for recycling of plastic wastes. Since chemical processes are high cost, energy and often environment harmful, thermo-mechanical techniques of recycling rises as a good alternative. This research deals with mechanical characterization of thermo
Mat. Res.. Publicado em: 02/08/2013
-
16. Influence of glass and sisal fibers on the cure kinetics of unsaturated polyester resin
The effect of grinded glass and sisal fibers (25 vol%) on the cure kinetics of composites of unsaturated polyester resin (UPR) was investigated by differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). The DSC analysis was carried out at four different heating rates (5, 10, 20 and 40 °C/min), and the cure enthalpy and activation ene
Materials Research. Publicado em: 26/06/2012
-
17. Flexural behavior of Sisal/Castor oil-Based Polyurethane and Sisal/Phenolic Composites
Natural fibers used as reinforcement of polymeric composites are interesting research subjects in polymer technology. Nowadays, these materials are being considered as a way to reinforce timber structures improvement. Fibers with larger structural applications are glass and carbon fibers, however, the use of natural fibers is an economic alternative and pres
Materials Research. Publicado em: 24/02/2012
-
18. Bagaço de cana de açúcar como reforço de matrizes termorrígidas baseadas em macromoléculas de ligninas / Sugarcane bagasse as reinforcement of thermoset matrices based on lignin macromolecules
As resinas do tipo fenólica são amplamente utilizadas devido à sua diversidade de aplicações. Considerando as inúmeras vantagens desta resina (estabilidade térmica e dimensional, alta resistência à chama, etc.), este trabalho teve como um dos objetivos melhorar as propriedades mecânicas do termorrígido fenólico, pois estes são frágeis quando n�
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/07/2011
-
19. Desenvolvimento de um compósito de espuma rígida de poliuretana de mamona e fibras de sisal para isolação térmica
A busca por alternativas tecnológicas sustentáveis e, sobretudo que venham a contribuir para economizar energia, apresenta-se como um crescente desafio no campo dos materiais para isolação térmica. Nesse contexto, os compósitos fabricados com matéria-prima de fontes renováveis surgem como uma alternativa tecnológica. Os principais objetivos deste tr
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 24/03/2011
-
20. Uso de fibra natural de sisal em blocos de concreto para alvenaria estrutural / Use of natural sisal fiber in concrete blocks for structural masonry
A utilização de fibras vegetais como reforço constitui um grande interesse na obtenção de novos materiais para a construção civil produto de seu baixo custo, alta disponibilidade e reduzido consumo de energia para sua produção. Este trabalho avalia a incorporação de fibras de sisal, de comprimento 20 e 40 mm, e fração volumétrica de 0,5 e 1%, e
Publicado em: 2011
-
21. Adsorção de cobre e cromo utilizando fibra de sisal visando o tratamento da água produzida pela indústria petrolífera
A indústria de petróleo é atualmente uma das principais causadoras da poluição ambiental. O objetivo deste trabalho foi reduzir a concentração de cobre e cromo na água produzida pela indústria petrolífera. Foi usado como adsorvente a fibra de sisal natural, tratada com ácido nítrico e hidróxido de sódio. Todas as fibras vegetais possuem caracte
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 19/07/2010
-
22. Sodium lignosulphonate as agent of modification of lignocellulosic fiber surface and formulation of phenolic thermoset / Lignosulfonato de sódio como agente de modificação da superfície de fibras lignocelulósicas e da formulação de termorrígido fenólico
Due to the great current interest in biocomposites because of both the use of lignocellulosic fibers as reinforcers of polymer matrices and the production of matrices prepared from renewable raw material, this study has sought to improve the properties of phenolic thermosets using sodium lignosulphonate as a macromonomer, and the insertion of sisal fibers, e
Publicado em: 2010
-
23. Diameter dependence of tensile strength by Weibull analysis: Part III sisal fiber
Environmental aspects and economical advantages are motivating the use of natural fiber as reinforcement of polymer composites in substitution for synthetic fiber composites such as fiber glass. In particular, the sisal fiber is one of the most investigated and being used in engineering systems. By contrast to synthetic fibers, natural fibers have the disadv
Matéria (Rio de Janeiro). Publicado em: 2010
-
24. A multi-scale investigation of the mechanical behavior of durable sisal fiber cement composites
Durable sisal fiber cement composites reinforced with long unidirectional aligned fibers were developed and their mechanical behavior was characterized in a multi-scale level. Tensile tests were performed in individual sisal fibers. Weibull statistics were used to quantify the degree of variability in fiber strength at different gage lengths. The fiber-matri
Matéria (Rio de Janeiro). Publicado em: 2010