Sintering
Mostrando 13-24 de 346 artigos, teses e dissertações.
-
13. Cold sintering and electric characterization of ZnO-BaTiO3 composites
Abstract The sintering is an essential step in the processing of ceramics materials. A number of researchers have reported new techniques for sintering. However, in general, the process still demands high temperatures. This paper reports the results of the cold sintering of ZnO-BaTiO3 composites. The microstructural, structural, and electric properties of th
Cerâmica. Publicado em: 2021-03
-
14. Thermal decomposition and reaction sintering for synthesis of mullite-zirconia composite using kaolin, γ-alumina and zirconia
Abstract The refractory materials used in the wall of the furnaces for glass melting can be prepared from mullite-zirconia composite material. The composite of mullite/zirconia was synthesized from Iraqi kaolin, γ-alumina, and zirconia using thermal decomposition with reaction sintering at 1600 °C. Several batches were prepared with various ratios of kaoli
Cerâmica. Publicado em: 2021-03
-
15. Influence of sintering parameters on the microstructure and mechanical properties of nanosized 3Y-TZP ceramics
Abstract The fracture toughness of 3Y-TZP ceramics obtained from a nanocrystalline powder with an optimized microstructure and highly transformable tetragonal grains was investigated. Samples of ZrO2-3 mol% Y2O3 were sintered at temperatures between 1250 and 1400 °C, with isothermal holding times of up to 16 h. Samples sintered at 1250 °C exhibited relativ
Cerâmica. Publicado em: 2021-03
-
16. Effects of sintering temperature on microstructure and properties of sanitaryware ceramic produced with waste material
Abstract This paper aims at exploring the possibility of using a great percentage of recycled materials into vitreous china (VC), thus, contributing to urban waste decrease while lowering the industry’s buying costs, previously optimized, for the sanitaryware production. The recycled blend was introduced in the ceramic slip, Sanitser VC, and used in three
Cerâmica. Publicado em: 2021-03
-
17. Unified comprehension of the kinetics of isothermal ceramic processes under field-free and resonant wave-field conditions
Abstract This paper proposes a unified comprehension of the isothermal ceramic process kinetics stemming from mesoscopic irreversible thermodynamics. Accordingly, a unified process kinetic equation (UPKE) is derived, which predicts that the global isothermal process rate of any ceramic process is, in general, nonlinearly related both to its activation energy
Cerâmica. Publicado em: 2021-03
-
18. INCORPORAÇÃO DE RODAMINA B EM MEMBRANA DE POLIAMIDA PELO MÉTODO DA ADSORÇÃO
We have incorporated rhodamine into polyamide membranes by additive manufacture selective laser sintering technology. Incorporation into 0.5 cm2 membranes was conducted at different pH values and constant temperature of 25 oC. The amounts of incorporated dye were determined by a calibration curve, and analyses showed rhodamine incorporation in the order of 1
Quím. Nova. Publicado em: 2021-02
-
19. Effect of LZSA glass-ceramic addition on the erosive wear of pressureless sintered alumina
Abstract This study aims to evaluate the influence of the 11.6Li2O-16.8ZrO2-68.2SiO2-3.4Al2O3 (mol%) glass-ceramic addition (LZSA, 7 to 21 vol%) on the erosive wear of alumina in comparison to values of pure alumina obtained from the literature. Thus, composites were prepared from three commercial alumina of different initial particle sizes. Specimens were o
REM, Int. Eng. J.. Publicado em: 2020-06
-
20. Preparation and characterization of yttria stabilized zirconia (YSZ) films deposited by dip-coating on LSM-YSZ substrate with different proportions
ABSTRACT In this work, sol-gel/dip-coating process for obtaining yttria stabilized zirconia (YSZ, ZrO2–8% Y2O3) films deposited onto LSM-YSZ (lanthanum strontium manganite (LSM, La0.7Sr0.3MnO3) mixed with YSZ) with different proportions (20/80, 50/50, 80/20) was investigated. The films were deposited on substrate varying the number of layers deposited. LSM
Matéria (Rio J.). Publicado em: 25/11/2019
-
21. Glass-ceramic produced with recycled glass
ABSTRACT The objective of this work is the production and characterization of glass-ceramic with recycled glass powder and 4% (w/w) of cerium dioxide. Eleven groups were defined with conformation pressure of 11.6 and 25.8 MPa, and cerium dioxide addition. The sintering temperatures of 650, 675, 700 and 750 °C were used. The raw material was formed into a mo
Matéria (Rio J.). Publicado em: 25/11/2019
-
22. Phase and microstructural analysis of NdTi0.8M0.2O3.4 (M = Al, Ga) microwave ceramics
ABSTRACT In this paper, we report the characterization of NdTi0.8M0.2O3.4 (M = Ga, Al) ceramics prepared via mixed oxide solid state sintering route. X-ray diffraction analysis of the samples revealed the formation of single phase for NdTi0.8Ga0.2O3.4 sample while secondary phase was formed in the case of NdTi0.8Al0.2O3.4. Microstructural analysis of the sam
Matéria (Rio J.). Publicado em: 25/11/2019
-
23. Study of Structural and Electric Properties of the PZT 52/48 Doped With Er+3
The scientific community has shown a growing interest in relating to the ferroelectric materials and it has made an effort to develop them. Among these several ferroelectric materials, we proposed to investigated Pb(ZrTi)O3 doped with distinct Er+3 concentrations. Our aim was to investigate how the erbium affects the PZT electrical properties. To determine t
Mat. Res.. Publicado em: 25/11/2019
-
24. Utilização de casca de ovo como fonte alternativa de cálcio na obtenção de titanato de cálcio (CaTiO3)
RESUMO No presente trabalho, detalha-se o estudo do reaproveitamento da casca de ovo como fonte alternativa mineral de calcita na síntese de titanato de cálcio (CaTiO3). As matérias-primas foram caracterizadas por difração e fluorescência de raios X e as composições foram formuladas e sinterizadas em diferentes condições. Após a sinterização, as
Matéria (Rio J.). Publicado em: 25/11/2019