Simultaneous Heat And Mass Transfer
Mostrando 1-10 de 10 artigos, teses e dissertações.
-
1. THE COMPLETE MODELLING OF THE FILLING PROCESS OF HYDROGEN ONBOARD VEHICLE CYLINDERS
Abstract Complete modelling of the filling process occurring in a hydrogen-fueled vehicle storage cylinder is examined. A simultaneous modelling of the flow and heat transfer within the cylinder and cylinder wall has not been considered in previous studies. Rapid filling may result to an unexpected temperature rise and breaching of the safety standards. In t
Braz. J. Chem. Eng.. Publicado em: 2016-06
-
2. Modelagem fenomenológica do desempenho de torres de resfriamento de água acopladas e estudo de casos. / Phenomenological modeling of performance of coupled water cooling towers and case studies.
Neste trabalho foi realizada a modelagem fenomenológica do desempenho de uma torre de resfriamento de água e de um sistema de duas torres de resfriamento em série, com temperatura de água de entrada de até 65 ºC. Verificou-se a validade do modelo através de comparação dos resultados previstos com os obtidos em ensaios em uma unidade piloto. Em segui
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 03/06/2011
-
3. Solution of porous media inverse drying problems using a combination of stochastic and deterministic methods
In the present work the inverse problem of simultaneous heat and mass transfer modeled by Luikov equations is studied using a hybrid combination of the Levenberg-Marquardt (LM), Simulated Annealing (SA) and Artificial Neural Network (ANN) methods. The direct and inverse problems are described, formulated and solved. After the use of an experiment design tech
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2011-12
-
4. Numerical study on hygroscopic material drying in packed bed
The paper addresses numerical simulation for the case of convective drying of hygroscopic material in a packed bed, analyzing agreement between the simulated and the corresponding experimental results. In the simulation model of unsteady simultaneous one-dimensional heat and mass transfer between gas phase and dried material, it is assumed that the gas-solid
Brazilian Journal of Chemical Engineering. Publicado em: 2011-06
-
5. Análise da transferência simultânea de calor e massa nos processos de absorção de vapor em soluções binárias via GITT
O fenômeno da transferência simultânea de calor e massa presente nos absorvedores das máquinas de refrigeração por absorção foi estudado pela Técnica da Transformada Integral Generalizada, do inglês Generalized Integral Transform Technique GITT, para três casos de interesse prático com crescente grau de dificuldade em sua formulação matemática
Publicado em: 2010
-
6. Simultaneous heat and mass transfer in packed bed brying of seeds having a mucilage coating
The simultaneous heat and mass transfer between fluid phase and seeds having a mucilaginous coating was studied during packed bed drying. To describe the process, a two-phase model approach was employed, in which the effects of bed shrinkage and nonconstant physical properties were considered. The model took into account bed contraction by employing moving c
Brazilian Journal of Chemical Engineering. Publicado em: 2008-03
-
7. Influência de variáveis de processo do desempenho de torre de resfriamento. / Influence of process variables on the cooling tower performance.
Com base em um modelo fenomenológico e a partir de dados experimentais obtidos numa planta piloto, foi obtida uma correlação entre o desempenho de uma torre de resfriamento em função das principais variáveis de processo: fluxos mássicos do gás e da água pela torre, e temperatura de entrada da água. Os resultados apresentaram boa consistência, comp
Publicado em: 2008
-
8. Desenvolvimento de um secador spray para obtenção de pós finos de precursores de nióbio / Production of oxalate-niobate ammonium powders through spray drying process
O presente trabalho consiste em projetar e construir um secador spray com a finalidade de secar precursores do tipo oxalato-niobato de amônia para obtenção de pós com granulometria controlada e adequados à produção de carbetos de Nióbio policristalino. Este precursor é atualmente obtido com granulometria dispersa, e morfologia não uniforme. A secag
Publicado em: 2007
-
9. Modelling and simulation of drying phenomena with rheological behaviour
Foods have high moisture contents which are lost during the drying process. This water loss can produce important changes in size that hinder the analysis of heat and mass transport. A model of simultaneous heat and moisture transfer in parallelepiped-shaped potato samples was coupled with a model of its elastic behaviour. Governing equations and boundary co
Brazilian Journal of Chemical Engineering. Publicado em: 2005-06
-
10. Secagem em leito fixo de sementes com mucilagem.
Attempting to contribute with the studies on mucilaginous seeds drying, the objective of this work is to study the simultaneous heat and mass transfer during drying in fixed bed of papaya seeds with and without mucilage. The physical-mathematical analysis used to predict the moisture and temperature profiles during drying was based on two-phases model, accor
Publicado em: 2004