Silica Alumina
Mostrando 1-12 de 158 artigos, teses e dissertações.
-
1. Microstructural characteristics, properties, synthesis and applications of mullite: a review
Abstract Mullite, an intermediate phase of the binary alumina-silica system, is one of the most important phases of ceramic products containing alumina and silica in the initial composition. Its stoichiometry ranges from 3Al2O3.2SiO2 (3:2) to 2Al2O3.SiO2 (2:1) and its crystalline structure is orthorhombic, characterized by the presence of octahedral chains o
Cerâmica. Publicado em: 2022
-
2. Use of glass waste in the production of metakaolin-based geopolymer submitted to room temperature and thermal curing
Resumo O metacaulim é a principal matéria-prima utilizada na síntese de geopolímeros, embora a relação entre os teores de sílica e alumina não seja a ideal. Normalmente, o teor de SiO 2 é ajustado com o uso de silicatos presentes na solução ativadora. Uma opção ecoeficiente seria o uso de resíduos de vidro como fonte adicional de sílica. Este
Ambiente Construído. Publicado em: 2022
-
3. Zeólita NaA sintetizada sobre fibra de vidro como estratégia para otimização do abrandamento de águas duras
NaA ZEOLITE SYNTHESIZED OVER FIBERGLASS AS A STRATEGY FOR OPTIMIZING HARD WATER SOFTENING. Zeolite NaA has been successfully synthesized over glass fiber surface previously activated by alkaline treatment. By varying the time of the treatment and the amount of silica and alumina precursors used in the reaction mixture, a sample with higher zeolite concentrat
Química Nova. Publicado em: 2022
-
4. Adsorption of Calcium(II), Cadmium(II) and Copper(II) Ions from Water by Prepared Silicon-Aluminum-Zirconium Oxide Using Sol-Gel Process
Ternary oxide silica-alumina-zirconia (SiO2/Al2O3/ZrO2) obtained by the sol-gel process was applied as novel adsorbent of ions in aqueous solution. Batch isotherms were performed using standard CuII, CdII and CaII solutions at variable pH and different concentrations. Adsorption capacity was best at weakly acidic pH. The maximum adsorption capacities were 2.
J. Braz. Chem. Soc.. Publicado em: 2021-07
-
5. Optimization and Study of the Response Surface of Properties for the Synthesis of ZSM-5 Zeolites with Hierarchical Pore Structure Obtained by Desilication
Hierarchical ZSM-5 zeolites were prepared by alkali treatment (desilication) at two temperatures, two reaction times, and two NaOH concentrations. A 23 factorial design was used to study the effect of these variables on the crystallinity, microporosity, and mesoporosity of the zeolite due to the desilication treatment. The factorial design analysis showed th
J. Braz. Chem. Soc.. Publicado em: 2021-06
-
6. Evaluation of the use of silica-alumina refractory waste as a supplementary cementitious material
Abstract The use of supplementary cementitious materials (SMCs) is one of the three essential factors for the sustainability of the cement industry. To reduce CO2 emissions, several studies have introduced new methods for the utilization of industrial wastes such as the addition into cementitious materials. The objectives of this study were to chemically and
Cerâmica. Publicado em: 2021-06
-
7. Influence of Mn2+ ions on depression of quartz and spessartine in gondite ore
Abstract Low-grade manganese ores that are composed of manganese oxides, wad, quartz, iron oxides, gibbsite, and especially of spessartine (Mn3Al2(SiO4)3) are known as gondite. Spessartine is a mineral with a high content of silica (SiO2) and alumina (Al2O3) that causes a decrease of the enrichment in manganese oxide concentrates by flotation, giving this o
REM, Int. Eng. J.. Publicado em: 2021-01
-
8. Corrigendum
Abstract Reconciliation plays a key role in controlling and analysing mine operations. It consists in comparing model estimates with actual results produced by the plant, being used as an indicator, a monitoring tool. Discrepancies between these values are common in the mining industry and they highlight problems during processing steps. However, these discr
Braz. J. Psychiatry. Publicado em: 2020-12
-
9. Reconciliation of sampling data and heterogeneity analysis of a bauxite mine in Poços de Caldas/MG, in Brazil
Abstract Reconciliation plays a key role in controlling and analysing mine operations. It consists in comparing model estimates with actual results produced by the plant, being used as an indicator, a monitoring tool. Discrepancies between these values are common in the mining industry and they highlight problems during processing steps. However, these discr
REM, Int. Eng. J.. Publicado em: 2020-12
-
10. CATALYTIC OXIDATION OF ISOPROPYL ALCOHOL OVER PLATINUM BASED CATALYST: A STUDY OF THE EFFECT OF METHYL CELLULOSE ON Pt PARTICLES DISPERSION OVER MULLITE
Abstract Isopropyl alcohol (IPA) catalytic oxidation remains one of the most popular techniques to remove volatile organic compounds from indoor places. In our study, catalytic oxidation of IPA was investigated on catalysts based on platinum deposited on mullite (Al6Si2O13), known for its excellent thermal stability. Pt/Al6Si2O13 catalysts were prepared by i
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
11. Síntese de pigmentos de níquel utilizando areia descartada de fundição como fonte de sílica
Resumo Sintetizaram-se pigmentos do sistema Zn2-xNixSiO4 variando a proporção molar de zinco e níquel, partindo da estrutura willemita (Zn2SiO4) à olivina (Ni2SiO4), usando areia descartada de fundição (ADF) e sílica comercial como fontes de SiO2. A ADF foi caracterizada por análise química e DRX. A síntese dos pigmentos seguiu rota cerâmica, com
Cerâmica. Publicado em: 14/11/2019
-
12. Imidazolium-based Ionic Liquids Impregnated in Silica and Alumina Supports for CO2 Capture
Ionic liquids (ILs) physical immobilization in solid materials is a key strategy for developing efficient and low cost CO2 capture processes. In this work, two porous commercial substrates with different characteristics (silica and alumina) were impregnated with ILs by physical wet method. Imidazolium based IL combined with [Br]- and [Tf2N]- anions were used
Mat. Res.. Publicado em: 11/11/2019