Shear Zone
Mostrando 1-12 de 92 artigos, teses e dissertações.
-
1. Structure and tectonic significance of high- and low-temperature deformation along the lateral escape-related Guaçuí and Batatal shear zones, southern Araçuaí Orogen (southeastern Brazil)
Abstract The Guacuí and Batatal lineaments in the southern region of the state of Espírito Santo (southeastern Brazil) can be traced from satellite images for tens of kilometers. They are considered shear zones associated to the final tectonic stages of the Araçuaí-West Congo (A-WC) Orogen during the Ediacaran-Cambrian period. In order to understand thei
REM, Int. Eng. J.. Publicado em: 2020-12
-
2. O Que Faz um Artigo ser Mais Citado?
Abstract The Guacuí and Batatal lineaments in the southern region of the state of Espírito Santo (southeastern Brazil) can be traced from satellite images for tens of kilometers. They are considered shear zones associated to the final tectonic stages of the Araçuaí-West Congo (A-WC) Orogen during the Ediacaran-Cambrian period. In order to understand thei
Rev. adm. contemp.. Publicado em: 2020-12
-
3. Effect of Welding Heat Input on the Microstructure and Mechanical Properties of Dissimilar Friction Stir-Welded Copper/Brass Lap Joint
Dissimilar lap welded joints of copper and brass metals were fabricated by friction stir welding (FSW) method at various welding heat inputs. The effect of welding heat inputs on the microstructure and mechanical properties of overlap welded joints at at two different join configurations (i.e. Advancing side and Retreating side joint configurations) was inve
Mat. Res.. Publicado em: 26/08/2019
-
4. The role of airborne geophysics in the investigation of gold occurrences in the Itapetim Region, Borborema Province, Northeast Brazil
Abstract We present a combined analysis of airborne geophysical data (magnetics and gamma-ray spectrometry) and field aspects of Itapetim lode gold district region, aiming to identify structurally deformed and hydrothermally altered zones, which are suggestive of gold mineralized sectors. The main geophysical lineaments are oriented in the NE-SW and E-W dire
Braz. J. Geol.. Publicado em: 22/08/2019
-
5. Mineralogical and gemological characterization of emerald crystals from Paraná deposit, NE Brazil: a study of mineral chemistry, absorption and reflectance spectroscopy and thermal analysis
Abstract The Paraná deposit, located at Southwestern Rio Grande do Norte state, in Brazil, is one of the few emerald deposits found at Borborema Province. The mineralization occurs in phlogopite schists and actinolite-phlogopite schists associated with pegmatites and albitites within the Portalegre Shear Zone. Unlike other well-known Brazilian emerald depos
Braz. J. Geol.. Publicado em: 22/08/2019
-
6. Effect of Annealing Process on the Microstructures and Mechanical Properties of AZ31B/A356 Composite Plate Fabricated by Cast Rolling
The effect of annealing process on the microstructures and mechanical properties of Mg/Al composite plates fabricated by cast-rolling was investigated in this study. The results show that the interfacial transition zone can be divided into three regions: a Mg transition region, an Al transition region, and an intermediate region, respectively. The microhardn
Mat. Res.. Publicado em: 10/07/2019
-
7. The Cristalino IOCG deposit: an example of multi-stage events of hydrothermal alteration and copper mineralization
Abstract The Cristalino deposit is located 40 km east of Sossego mine, Carajás. The orebody lies along a NW-SE-striking shear zone and is mainly hosted by the Neoarchean bi-modal volcanics of the Grão Pará Group. Field work and petrographic data seconded by SEM-EDS analysis allowed recognizing an early sodic metasomatism that was followed by calcic-ferric
Braz. J. Geol.. Publicado em: 15/04/2019
-
8. Microfacies and diagenetic evolution of the limestones of the upper part of the Crato Formation, Araripe Basin, northeastern Brazil
Abstract This paper presents the results of a petrographic and diagenetic study of the laminated limestones of the upper part of the Aptian to Albian Crato Formation, northeast of Brazil. The applied techniques were optical microscopy, cathodoluminescence and scanning electron microscopy (SEM) coupled to a wavelength-dispersive spectrometer (WDS). Petrograph
Braz. J. Geol.. Publicado em: 08/04/2019
-
9. Favorability potential for IOCG type deposits in the Riacho do Pontal Belt: new insights for identifying prospects of IOCG-type deposits in NE Brazil
ABSTRACT: Archean iron oxide-copper-gold (IOCG) deposits have been systematically described in the world class Carajás IOCG district, Amazonian region of Brazil. More recently, several Neoproterozoic (ca 1.13 to 0.96 Ga) IOCG deposits have been identified in the Riacho do Pontal mobile belt situated in the Borborema Province on the northern border of the S�
Braz. J. Geol.. Publicado em: 06/12/2018
-
10. Microstructure and Properties of 3D Printed Inconel 718 Joint Brazed with BNi-2 Amorphous Filler Metal
Three dimensional (3D) printing technology has been widely used in metal manufacturing industry. This study focused on the vacuum brazing of 3D printed Inconel 718 superalloy with BNi-2 amorphous filler metal. Interfacial microstructure and element distribution revealed excellent wettability and spreadability of the filler metal as well as favorable brazabil
Mat. Res.. Publicado em: 14/11/2018
-
11. Optimización del proceso RSW para acero DP 1000
ABSTRACT In recent times new materials have been introduced in automobiles construction in order to reduce their weight and consequently fuel consumption and emissions level. Among them are Dual Phase (DP) steels, constituted by a ferritic matrix with martensite islands. Resistance Spot Welding (RSW) is the most commonly used welding process in the automotiv
Matéria (Rio J.). Publicado em: 19/07/2018
-
12. Laboratory study of dynamic mechanical characteristic of granite subjected to confining pressure and cyclic blast loading
Abstract To investigate the deformation characteristic of deep rock under cyclic blasting, the static-dynamic loading experimental equipment was set up. The dynamic strain gauges and high-speed (HS) camera were adopted to obtain strain field and the crack propagation of rock under confining pressure of 0 MPa, 5 MPa and 10 MPa. Under the one-time loading fro
Lat. Am. j. solids struct.. Publicado em: 28/06/2018