Semiconductor Devices
Mostrando 1-12 de 101 artigos, teses e dissertações.
-
1. Estudio Ab-initio de propiedades estructurales, elásticas y electrónicas de nanohilos core/shell
ABSTRACT This Zinc oxide (ZnO) is widely used in different electronic devices due to its thermal, electronic, and piro-piezoelectric properties. Some of these properties are noticeable improvement at the nanoscale, specially when ZnO together with other material create heterostructures. Recently, core/shell nanowires have been synthesized in order to raise t
Matéria (Rio J.). Publicado em: 19/07/2018
-
2. Calibration of TLM Model for Semiconductor Optical Amplifier by Heuristic Parameters' Extraction
Abstract The systemic behavior of a Semiconductor Optical Amplifier model was optimized through extensive simulations, reaching reasonable approximation to experimental obtained from commercial devices for the optical gain versus bias current, for different optical inputs powers (-25 up to 0 dBm), and for the gain saturation profile for different I-bias (0 u
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2018-06
-
3. Performance Evaluation of Titanate Nanotubes and Nanoribbons Deposited by Electrophoresis in Photoelectrodes of Dye-Sensitized Solar Cells
Nanoparticles of TiO2 have been the main semiconductor applied in Dye-sensitized solar cells (DSSCs). In this work, titanate nanotubes (NaTiNT) and nanoribbons, were obtained by the hydrothermal method from TiO2 anatase. These materials were deposited on conductive substrate by electrophoresis, with and without thermal treatment, sensitized by ruthenium-base
Mat. Res.. Publicado em: 28/05/2018
-
4. PONTOS QUÂNTICOS AMBIENTALMENTE AMIGÁVEIS: DESTAQUE PARA O ÓXIDO DE ZINCO
Semiconductor nanocrystals with sizes in the quantum confinement regime (2-10 nm) present special physical and chemical properties. Additionally, environment-friendly quantum dots (QDs), as zinc oxide and zinc sulfide, offer many practical usages. Herein the ZnO semiconductor nanocrystals properties will be preferentially explored, such as its luminescence,
Quím. Nova. Publicado em: 2017-10
-
5. Ba-DOPED ZnO MATERIALS: A DFT SIMULATION TO INVESTIGATE THE DOPING EFFECT ON FERROELECTRICITY
ZnO is a semiconductor material largely employed in the development of several electronic and optical devices due to its unique electronic, optical, piezo-, ferroelectric and structural properties. This study evaluates the properties of Ba-doped wurtzite-ZnO using quantum mechanical simulations based on the Density Functional Theory (DFT) allied to hybrid fu
Quím. Nova. Publicado em: 2016-04
-
6. Low-intensity red and infrared laser effects at high fluences on Escherichia coli cultures
Semiconductor laser devices are readily available and practical radiation sources providing wavelength tenability and high monochromaticity. Low-intensity red and near-infrared lasers are considered safe for use in clinical applications. However, adverse effects can occur via free radical generation, and the biological effects of these lasers from unusually
Braz J Med Biol Res. Publicado em: 28/07/2015
-
7. CARACTERIZAÇÃO DE NANOFIOS DE GERMÂNIO SINTETIZADOS UTILIZANDO COBRE COMO CATALISADOR
This paper presents reliable synthesis of germanium nanowires by the vapor-liquid-solid method using copper as an alternative catalyst to gold, the most commonly used metal. The morphological study showed long range single-crystalline germanium nanowires with diamond structure and diameters ranging from 20 nm to 80 nm and lengths in tenths of a micrometer
Quím. Nova. Publicado em: 2015-07
-
8. Thermal inkjet printing of copper tetrasulfonated phthalocyanine (CuTsPc) as a semiconducting layer on flexible MIS capacitors
Thermal inkjet-printing of copper tetrasulfonated phthalocyanine (CuTsPc) films containing polyvinyl alcohol (PVA) plasticizer were used to fabricate flexible metal-insulator-semiconductor (MIS) capacitors using anodic aluminum oxide (Al2O3) as the insulating layer. The Al2O3 layer and printed CuTsPc+PVA films were characterized individually and in a MIS str
Mat. Res.. Publicado em: 2014-12
-
9. Celdas solares fotoelectroquímicas basadas en Bi2WO6
In this study, photoelectrochemical solar cells based on bismuth tungstate electrodes were evaluated. Bi2WO6 was synthesized by a hydrothermal method and characterized by scanning electron microscopy, UV-Vis reflectance spectroscopy, and X-ray powder diffraction. For comparison, solar cells based on TiO2 semiconductor electrodes were evaluated. Photoelectroc
Quím. Nova. Publicado em: 2014-04
-
10. Determining the Fixed Pattern Noise of a CMOS Sensor: Improving the Sensibility of Autonomous Star Trackers
ABSTRACT: Autonomous star trackers are optical-electronic devices used for attitude determination of artificial satellites, having as a reference for this computation the positions of stars. There is one autonomous star tracker in development at the Aerospace Electronics Division of the Brazilian National Institute for Space Research. The autonomous star tra
J. Aerosp. Technol. Manag.. Publicado em: 2013-06
-
11. Photo-Induced conductivity of heterojunction GaAs/Rare-Earth doped SnO2
Rare-earth doped (Eu3+ or Ce3+) thin layers of tin dioxide (SnO2) are deposited by the sol-gel-dip-coating technique, along with gallium arsenide (GaAs) films, deposited by the resistive evaporation technique. The as-built heterojunction has potential application in optoelectronic devices, because it may combine the emission from the rare-earth-doped transpa
Mat. Res.. Publicado em: 23/04/2013
-
12. Aplicações de corrosão por plasma usando reatores ICP e RIE para tecnologia MEMS / Plasma etching applications using ICP and RIE reactors for MEMS technology
This thesis is based on etching processes applications in cold plasmas (room temperature) using RIE (Reactive Ion Etching) and ICP (Inductively Coupled Plasma), as reactors, applied to specific areas of microelectronics and MEMS devices in semiconductors industries and laboratories. Five applications are presented: Thinning gate CMOS Transistor - conventiona
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/08/2012