Scanning Electron Transmission
Mostrando 1-12 de 637 artigos, teses e dissertações.
-
1. Transmission electron microscopy of pili annulati
Abstract Background: Little is known about the ultrastructure of pili annulati. Objectives: To examine with transmission electron microscopy affected hairs of a family, whose diagnosis had been confirmed in five individuals with scanning electron microscopy, which showed surface undulations with ‘‘curtain-like’’ folding of the hair cuticula and to
Anais Brasileiros de Dermatologia. Publicado em: 2022
-
2. Study of nanocomposites with carbon nanotubes and their tendency for carbon organization
Abstract The carbon derived from the thermal treatment of modified phenolic resins (PR) tends to organize into graphitic lamellae or turbostratic carbon and is commonly considered non-graphitizable. In this study, nanocomposites were synthesized with modified phenolic resin (Novolac) used as the matrix and oxidized multi-walled carbon nanotubes (NTox) in amo
Cerâmica. Publicado em: 2022
-
3. X-ray line profile analysis and magnetic and optical properties of FexZn0.95-xCr0.05O nanoparticles fabricated by sol-gel route
Abstract FexZn0.95-xCr0.05O nanoparticles have been obtained for the different concentrations of Fe ions by using the sol-gel method. The hexagonal wurtzite structure of all the samples was confirmed by Rietveld refined X-ray diffraction patterns. The addition of Fe ions decreased lattice constants a and c from 3.2487 to 3.2474 Å and 5.2043 to 5.2029 Å, re
Cerâmica. Publicado em: 2022
-
4. Graphite-Polyurethane Composite Electrode Modified with Molecularly Imprinted Polymer for Determination of Diclofenac
A molecularly imprinted polymer (MIP) was prepared using the anti-inflammatory diclofenac (DCF) as a template. A non-imprinted polymer (NIP) was also prepared as a control. These MIP and NIP were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Brunauer-Emmett-Teller (BET), revealing a higher porosity in the fir
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
5. EFFECT OF REACTION CONDITIONS ON PARTICLE SIZE OF ZNO NANOPARTICLES VIA CONTROLLED PRECIPITATION METHOD AND IN-VITRO ANTIBACTERIAL CAPACITY
High-yield ZnO spheroidal nanoparticles with an average diameter around 23 nm (≈ 25% frequency) and 30 nm (≈ 28% frequency) were obtained by controlled semicontinuous precipitation at low temperatures. This synthesis was obtained from hydrozincite (Zn5(CO3)2(OH)6) as primary nanoparticles. The Zn5(CO3)2(OH)6 nanoparticles were synthesized by hydrolysis o
Química Nova. Publicado em: 2022
-
6. Transmission and scanning electron microscopy of cutis rhomboidalis
Abstract Cutis rhomboidalis nuchae was assessed in a 65-year-old patient. Optical microscopy showed basophilic agglomerations in the reticular dermis with decreased elastic fibers. Trans- mission electron microscopy showed elongated, curved and fragmented structures, and in their interior the presence of electron-dense lumps was reduced and irregular, simila
An. Bras. Dermatol.. Publicado em: 2021-06
-
7. Reusable Heterogeneous SnO2/ZnO Catalyst for Biodiesel Production from Acidified/Acid Oils
A catalyst comprised of SnO2 impregnated on ZnO nanowires, which presented remarkable ability to catalyze fatty acid esterification/transesterification reactions, is reported. For optimization of reaction conditions, artificially acidified soybean oil with 10 wt.% oleic acid was used as a model feed. The optimized conditions were: 150 °C, 6 h, 5 g of oil, c
J. Braz. Chem. Soc.. Publicado em: 2021-01
-
8. Preparation of Fluorescent Carbon-Based Dots from Waste Tire Pyrolysis
The pyrolysis of waste tire has been proposed as an alternative route to its recycling producing residual oils that can be used as fuels. In this work, a physicochemical process to obtain carbon-based dots (CBD) from carbon black (CBL) derivatives of tires is described. For this, the CBL was treated with different acids to produce CBL1 and CBL2 particles sus
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
9. New Strategy for Streptavidin Detection Using AuNRs/PAAm Hydrogel Composites
Localized surface plasmon resonance (LSPR) is a collective oscillation of free electrons induced by the incident light in nanometric surfaces of conductive materials. Gold nanorods (AuNRs) have been studied for plasmonic devices due to their anisotropic properties. Herein, we report the construction of a specific biosensor using polyacrylamide (PAAm) as the
J. Braz. Chem. Soc.. Publicado em: 2020-09
-
10. Antimicrobial High-Density Polyethylene (HDPE)/ZnO Nanocomposites Obtained by in situ Polymerization
Nanostructured zinc oxide (ZnO) prepared by combustion in solution was used to obtain nanocomposites. The ZnO particles were characterized by Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), and scanning electron microscopy (SEM), showing crystallite size of 32 nm and a superficial area of 32.6 m2 g-1. Nanocomposites with 1, 3, and 5 wt.% of ZnO in the
J. Braz. Chem. Soc.. Publicado em: 2020-08
-
11. New Magnetic Fe Oxide-Carbon Based Acid Catalyst Prepared from Bio-Oil for Esterification Reactions
In this work, bio-oil (an organic matrix rich in oxygen functionalities) was used to efficiently dissolve and disperse Fe3+ which upon thermal treatment produced a carbon containing dispersed and encapsulated Fe oxide magnetic nanoparticles. These materials were prepared by dissolution of 8, 16 and 24 wt.% Fe3+ salt in bio-oil followed by treatment at 400, 4
J. Braz. Chem. Soc.. Publicado em: 2020-08
-
12. Dielectric and Magnetic Properties of Epoxy with Dispersed Iron Phosphate Glass Particles by Microwave Measurement
Abstract This paper investigates the dielectric properties and magnetic properties of epoxy composites with different amount of powdered iron phosphate glass (IPG) at 8.2 GHz to 12.4 GHz using microwave technique. IPG composed of 60P2O5-40Fe2O3 (mol%) was produced by conventional melt and quenching method and crushed into powder. The IPG powder was character
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-06