Resin
Mostrando 25-36 de 2331 artigos, teses e dissertações.
-
25. Relevance of Resin for Photoelasticity
The goal of this study is to test photoelastic resins for manufacturing models with teeth and/or implants under chewing load. Four commercial brands have been chosen: Araldite (Ciba Chemicals), Flexible GIV-Rigid GIV (Polipox) and PL2 (Measurements Group). Nine discs were manufactured, four of them from each of the photoelastic resin brands and five from dif
Mat. Res.. Publicado em: 20/01/2020
-
26. Evaluation of the physical and antifungal effects of chlorhexidine diacetate incorporated into polymethyl methacrylate
Abstract This study aimed to evaluate the physical properties and antifungal activities of polymethyl methacrylate (PMMA) acrylic resins after the incorporation of chlorhexidine diacetate salt (CDA). Methodology: First, acrylic resin specimens were fabricated with Vipi Cor® and DuraLay® resins with and without the incorporation of 0.5%, 1.0% or 2.0% CDA.
J. Appl. Oral Sci.. Publicado em: 10/01/2020
-
27. Analysis of enamel and material wear by digital microscope: an in-vitro study
Abstract: The objective of the study was to analyze the surface area (SA) of the wear caused by simulated chewing on human enamel and opposing restorative material, namely: composite resin (CR), porcelain fused to metal (PFM), lithium disilicate (LD), or monolithic zirconia (MZr). Forty-eight premolars were selected as enamel specimens and divided randomly i
Braz. oral res.. Publicado em: 10/01/2020
-
28. Resorcinolic Lipids from Yucatecan Propolis
Propolis is a material produced by bees from a combination of plant exudates and wax, used to fill out cracks in the beehive and to defend against intruders and pathogenic microorganisms; it is recognized for its many biological activities and its chemical composition depends on the botanical sources close to the beehive. The objective of this investigation
J. Braz. Chem. Soc.. Publicado em: 2020-01
-
29. Color Stability of Ceramic Veneers Luted With Resin Cements and Pre-Heated Composites: 12 Months Follow-Up
Resumo O objetivo foi avaliar a estabilidade de cor de laminados cerâmicos de fina espessura, após a cimentação com cimentos resinosos e resinas compostas em temperatura ambiente e aquecida (60oC), durante 12 meses; bem como determinar o grau de conversão dos diferentes materiais para cimentação. Foram utilizados dois cimentos resinosos [AllCem Veneer
Braz. Dent. J.. Publicado em: 2020-01
-
30. The control of Maillard reaction in white grape molasses by the method of reducing reactant concentration
Abstract The aim of this study was to investigate the impact of removing sugar and/or amino groups by applying one ion exchange (Dowex 50Wx8) and two adsorbent (Activated Carbon and Amberlite XAD-16) resins to grape juice in the control of Maillard reaction. Grape juices, a control sample and separately applied with each resin, were concentrated up to 50, 60
Food Sci. Technol. Publicado em: 13/12/2019
-
31. Influence of hydrofluoric acid etching time and concentration on shear bond strength of metal brackets to ceramic surfaces
Resumo Introdução O tratamento de superfície prévio a colagem de braquetes a cerâmica com ácido fluorídrico, é indicado devido a sua capacidade de promover alterações morfológicas necessárias para a adesão. Objetivo Avaliar a resistência de união ao cisalhamento (RUC) de braquetes metálicos unidos à superfície cerâmica feldspática sob a
Rev. odontol. UNESP. Publicado em: 13/12/2019
-
32. SYNTHESIS, CHARACTERIZATION, ADSORPTION AND THERMODYNAMIC STUDIES OF PURE AND BINARY CO2-N2 MIXTURES ON OXYGEN ENRICHED NANOSTRUCTURED CARBON ADSORBENTS
Abstract Oxygen enriched porous carbons have been synthesized by a nanocasting technique using mesoporous zeolite as template and epoxy resin as precursor. Characterization results show the effect of the nanocasting technique on the development of heterogeneous surface, high basicity, and high surface area of 686.37 m2g-1, beneficial for CO2 adsorption. Pure
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
33. Aplicações das tecnologias Laser Scan e aerofotogrametria por drone para museus
RESUMO O presente trabalho apresenta alguns conceitos e diversas aplicações da tecnologia Laser Scan 3D (LS3D) para o levantamento de monumentos, peças de museu e esculturas, visando a obtenção de modelos, maquetes virtuais, filmes, exposições virtuais e maquetes em resina. Complementa-se, em alguns casos, com os levantamentos aerofotogramétricos com
An. mus. paul.. Publicado em: 05/12/2019
-
34. Adhesiveness of bulk-fill composite resin in permanent molars submitted to Streptococcus mutans biofilm
Abstract: The aim of the present study was to evaluate the microtensile bond strength and the microleakage of a bulk-fill composite resin compared with a conventional incremental composite resin, in permanent molars and under cariogenic challenge using a Streptococcus mutans model. Permanent human third molars (n = 60) with an occlusal cavity of 5×3×2 mm w
Braz. oral res.. Publicado em: 02/12/2019
-
35. Effect of resin content and pressing temperature on banana pseudo-stem particle boards properties using full factorial design
Abstract: The volume of global gross banana exports reached a record of 117.9 million tonnes in 2015 (FAO 2017), which agro-industrial wastes derived as the pseudo-stem, rachis and leaves do not have an industrial application instead they are discarded. This research study applies full factorial design and response surface methodology to determine the effect
An. Acad. Bras. Ciênc.. Publicado em: 02/12/2019
-
36. Influence of a Retentive Shoulder Design to Prevent Early Failure of Three Core Build-Ups
Resumo Este estudo avaliou a influência de um preparo retentivo em forma de ombro para prevenir a falha precoce de núcleos de preenchimento realizados em molares com 3 diferentes tipos de resina composta. Noventa e seis terceiros molares superiores hígidos extraídos de humanos, foram divididos em dois grupos (n=48) de acordo com o tipo de redução oclus
Braz. Dent. J.. Publicado em: 28/11/2019