Resin
Mostrando 13-24 de 2331 artigos, teses e dissertações.
-
13. Lignin-modified road marking paint: weathering aging studies
Abstract The accelerated artificial aging with ultraviolet radiation, viscosity, density, no-pick-up time, flexibility, and abrasion resistance of lignin-modified road marking paint were evaluated. The addition of lignin did not cause significant changes in the physical chemistry, flexibility and no-pick-time test compared to the precursor paint. The additio
REM, Int. Eng. J.. Publicado em: 2021-06
-
14. MODIFICAÇÃO QUÍMICA DO POLIPROPILENO ATRAVÉS DA INTRODUÇÃO DE GRUPOS SULFÔNICOS PARA APLICAÇÃO COMO CATALISADOR EM REAÇÕES DE ESTERIFICAÇÃO
In this work, the chemical modification of pristine polypropylene was carried out through sulfonation reactions with concentrated sulfuric acid (PPS1) and fuming sulfuric acid (PPS2), for production of heterogeneous catalysts used in esterification reactions. Fourier transform infrared spectroscopy, elemental analysis, degree of substitution and ion exchange
Quím. Nova. Publicado em: 2021-04
-
15. USE OF RESIDUES FROM THE CELLULOSE INDUSTRY AND SUGARCANE BAGASSE IN PARTICLEBOARDS
ABSTRACT The use of alternative materials such as lignocellulosic residues in the production of particleboards has increased considering that these residues are produced in large volumes and often do not have an appropriate destination. This research studied the use of residues from cellulose industries, sugarcane bagasse, and castor oil-based polyurethane r
Eng. Agríc.. Publicado em: 2021-02
-
16. o-DGT Devices for the Determination of Emerging Contaminants in Aqueous Matrices
Samplers based on the diffusive gradients in thin films for organics (o-DGT) were developed and applied in Brazilian aqueous matrices for the determination of four emerging contaminants (EC): 4-octylphenol, 4-nonylphenol, triclosan, and bisphenol A. The OASIS HLB resin used as the binding phase presented a high sorption capacity and the extraction associated
J. Braz. Chem. Soc.. Publicado em: 2021-01
-
17. Anatomical background of ovine kidney for use as animal model: analysis of arterial segmentation, proportional volume of each segment and arterial injury after cranial pole partial nephrectomy
ABSTRACT Objective To study the arterial segments of ovine kidney, present a proportional volume analysis of each kidney arterial segment, and analyze arterial injuries caused by simulated partial nephrectomy of cranial pole. Materials and Methods Forty-eight ovine kidneys injected with polyester resin into the renal arteries and collecting system were u
Int. braz j urol.. Publicado em: 2020-12
-
18. Method for Cleaning Back-Produced Water from Polymer Flooding Operations to Determine Polymer Molar Mass Using Size-Exclusion Chromatography
One of the methods used by the oil industry to increase production is to inject water, containing polymer, into the reservoir. The viscosity of the aqueous solution is primarily responsible for the efficiency of this method, and is achieved using polymers with high molar mass. However, polymer degradation can occur during pumping and fluid displacement in th
J. Braz. Chem. Soc.. Publicado em: 2020-12
-
19. IAO Systematic Review Award 2020
Abstract Background: Cosmetics are part of the daily life of the population, and their use can lead to allergic contact dermatitis. Objectives: To assess the profile of patients diagnosed with allergic contact dermatitis to cosmetics treated at a referral center for 13 years, as well as the characteristics of the clinical picture and allergens involved. M
Int. Arch. Otorhinolaryngol.. Publicado em: 2020-12
-
20. Allergic contact dermatitis to cosmetics: retrospective analysis of a population subjected to patch tests between 2004 and 2017,
Abstract Background: Cosmetics are part of the daily life of the population, and their use can lead to allergic contact dermatitis. Objectives: To assess the profile of patients diagnosed with allergic contact dermatitis to cosmetics treated at a referral center for 13 years, as well as the characteristics of the clinical picture and allergens involved. M
An. Bras. Dermatol.. Publicado em: 2020-12
-
21. High Conversion of Palm Olein to Ethyl Esters Using a Strong Anion Exchange Resin: Study of the Operational Parameters
Biodiesel, known as a mixture of fatty acid ethyl/methyl esters, is seen as an alternative, ecofriendly, biodegradable and renewable non-fossil fuel. The use of heterogeneous catalysts for biodiesel synthesis can solve several problems associated with the homogeneous alkaline catalyzed-transesterification. Therefore, this work reports the evaluation of the c
J. Braz. Chem. Soc.. Publicado em: 2020-07
-
22. The control of Maillard reaction in white grape molasses by the method of reducing reactant concentration
Abstract The aim of this study was to investigate the impact of removing sugar and/or amino groups by applying one ion exchange (Dowex 50Wx8) and two adsorbent (Activated Carbon and Amberlite XAD-16) resins to grape juice in the control of Maillard reaction. Grape juices, a control sample and separately applied with each resin, were concentrated up to 50, 60
Food Sci. Technol. Publicado em: 2020-06
-
23. PHYSICAL AND MECHANICAL PROPERTIES OF PARTICLEBOARD FROM Eucalyptus grandis PRODUCED BY UREA FORMALDEHYDE RESIN WITH SiO2 NANOPARTICLES
ABSTRACT The use of nanoparticles appears to be a feasible option for improving the quality of a range of wood-based products. Studies show that they can improve both the physical and mechanical properties of wood and wood-based products. This preliminary study aimed to analyze the influence of SiO2 nanoparticles on the physical and mechanical properties of
Eng. Agríc.. Publicado em: 2020-06
-
24. Physical-Mechanical Properties of a Resin-Modified Calcium Silicate Material for Pulp Capping
Resumo O objetivo deste estudo foi investigar e comparar as propriedades físico-mecânicas de um material à base de silicato de cálcio modificado por resina (TheraCal LC) ao MTA (Angelus) e um cimento de hidróxido de cálcio (Dycal). Espécimes de cada material (n=12) foram fabricados em moldes de Teflon (3,58 mm x 3 mm) e medidos antes e após imersão
Braz. Dent. J.. Publicado em: 2020-06