Reinforcements
Mostrando 1-12 de 69 artigos, teses e dissertações.
-
1. Lime Addition Effect on Corrosion of Reinforced Mortar
ABSTRACT This study aims to investigate the effect of lime addition in cement mortar on corrosion resistance of carbon and galvanized steel reinforcements. Mixed mortars were studied containing three contents of lime (6.7, 13.3, and 26.3 wt.%). The water retention, incorporated air, and compression strength of reinforced mortars were determined. Immersion te
Matéria (Rio J.). Publicado em: 16/09/2019
-
2. Optimized design of RC deep beams based on performance metrics applied to strut and tie model and in-plane stress conditions
Abstract Deep beams do not behave according to classical beam theory. The nonlinearity of strain distribution within these elements requires application of strut and tie models (STM) or other alternatives to evaluate the complex stress field. Although the design of these elements is a common task for structural engineers, limited research is found on assessi
Lat. Am. j. solids struct.. Publicado em: 22/08/2019
-
3. Evaluation of the resistance of trussed slabs with steel formwork in cold formed U profile
Abstract In the last decades, the modernization in structural engineering has increased the use of steel-concrete composite and hybrid systems for slabs, when the adherence in the interface of the materials is present or not, respectively. In addition to the traditional steel deck, a similar solution for precast trussed slabs has been used for small construc
Lat. Am. j. solids struct.. Publicado em: 12/08/2019
-
4. Influence of temperature on the adhesion of fibre reinforced polymers to timber surface
Resumo Os reforços de compósitos poliméricos com fibras de carbono (CFRP) e de vidro (GFRP) têm sido largamente usados em estruturas de madeira, onde eles podem estar expostos a condições adversas de temperatura. Para serem usados adequadamente, são necessárias informações sobre a sua adesão ao substrato. O objetivo desta pesquisa é avaliar a inf
Ambient. constr.. Publicado em: 10/06/2019
-
5. An efficient mechanical-probabilistic approach for the collapse modelling of RC structures
Resumo As estruturas em concreto armado são largamente utilizadas ao redor do mundo. Entretanto, a modelagem de seu complexo comportamento mecânico por formulações numéricas eficientes tem sido marginalmente apresentada na literatura. As formulações eficientes possibilitam a precisa e realista representação dos fenômenos mecânicos envolvidos e sã
Rev. IBRACON Estrut. Mater.. Publicado em: 20/05/2019
-
6. Nanocomposite Films Based on Flaxseed Gum and Cellulose Nanocrystals
Flaxseed gum (FG)-based films were developed with the addition of glycerol as a plasticizer and glutaraldehyde as a crosslinking agent. HCl was added to improve crosslinking and decrease the hydrophilicity of the matrix. Different cellulose nanocrystal (CN) amounts were used as reinforcements in the optimum FG formulation. The crosslinking process at pH 3.5
Mat. Res.. Publicado em: 22/10/2018
-
7. Monitoring reinforcement corrosion of concretes designed for nuclear facilitie
ABSTRACT The facilities designed for the peaceful activities of nuclear energy are made with different materials, among them, reinforced concrete. This material, in addition to being structural, is a barrier for isolation and confinement from the environment of the radioactive materials. One of its degradation mechanisms is the corrosion of the reinforcement
Matéria (Rio J.). Publicado em: 19/07/2018
-
8. Vida a fatiga de uniones soldadas mediante PAW de aceros microaleados al boro
ABSTRACT In the last years microalloyed boron steels have been adopted in the automotive industry to achieve weight reductions. Namely, they are used as load-bearing elements such as pillars and reinforcements, in a quenched and tempered (QT) condition with tensile strength ranging from 800 to 1300 MPa. Dual-Phase (DP) steels have also been introduced in thi
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Synthesis of Graphene Oxide and Functionalized CNT Nanocomposites Based on Epoxy Resin
ABSTRACT Lately, nanomaterials have been largely studied as reinforcements for epoxy resin. Although their usage is highly promising, the literature has reported some drawbacks regarding the improvement of mechanical properties in nanocomposites. These difficulties are usually due to dispersion of nanomaterials and its adhesion to the polymeric matrix. One a
J. Aerosp. Technol. Manag.. Publicado em: 16/07/2018
-
10. The Influence of Bleached Jute Fiber Filler on the Properties of Vulcanized Natural Rubber
There is growing interest in replacing the synthetic reinforcements used for natural rubber (NR) composites with natural fibers from renewable, environmentally sustainable sources. Jute fibers may be suitable reinforcements for NR because they have a high tensile strength, which is comparable to other fillers such as glass fibers. Thus, we studied the incorp
Mat. Res.. Publicado em: 30/10/2017
-
11. Transverse permeability determination and influence in resin flow through an orthotropic medium in the RTM process
ABSTRACT Resin Transfer Molding (RTM) process is commonly used to produce high quality polymeric composites with simple or complex geometries in small to large sizes. In RTM process a preformed reinforcement is positioned inside the mold cavity. This dry reinforcement is actually a fibrous porous media whereby resin will flow. The mold is then closed and res
Matéria (Rio J.). Publicado em: 20/07/2017
-
12. Microwave Sintering of Aluminum-ZrB2 Composite: Focusing on Microstructure and Mechanical Properties
Abstract Microwave assisted rapid sintering was carried out to fabricate aluminum-ZrB2 metal matrix composites containing 1 wt% cobalt and 10, 15 and 20 wt% ZrB2 as the reinforcements at temperatures of 600, 700 and 800°C. The results showed that the highest values of density and bending strength (97% of theoretical density and 240 MPa, respectively) were o
Mat. Res.. Publicado em: 13/05/2016