Reaming
Mostrando 1-7 de 7 artigos, teses e dissertações.
-
1. ANTEGRADE X RETROGRADE NAILING IN FEMORAL FRACTURES: A STUDY ON CONSOLIDATION AND INFECTION
RESUMO Objetivo: A osteossíntese com haste intramedular é considerada o método de escolha para tratamento das fraturas diafisárias do fêmur em adultos. O objetivo deste estudo retrospectivo foi avaliar o tempo até a consolidação e a incidência de infecção em pacientes com fratura diafisária do fêmur, operados com haste intramedular retrógrada
Acta ortop. bras.. Publicado em: 04/11/2019
-
2. SUBPRODUTOS DA FRESAGEM FEMORAL OU OSSO ESPONJOSO AUTÓGENO NA OSTEOSSÍNTESE FEMORAL COM HASTES BLOQUEADAS EM CÃES / FEMORAL INTRAMEDULLARY REAMING BYPRODUCTS OR AUTOGENOUS CANCELLOUS BONE IN FEMORAL OSTEOSYNTHESIS WITH INTERLOCKING NAILS IN DOGS
O objetivo desta pesquisa foi avaliar a técnica de hastes bloqueadas na osteossíntese de fraturas femorais em cães e avaliar o uso de subprodutos da fresagem intramedular femoral como adjuvante na cicatrização óssea. Foram utilizados 12 cães, pesando entre 15 e 18 kg, distribuídos aleatoriamente em três grupos iguais de acordo com o tipo de enxerto
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/02/2012
-
3. Influence of a diagonal pre-drilled hole on hole quality during the reaming process using multiblade tools
The requirements of production engineering for a precision hole are to ensure the required quality as well as minimal production costs. The interactions between machine, tool and the pre-drilled hole result in uncertainties during the final reaming process. For this purpose the reaming process itself and the appearance of process faults were focused in a lar
J. Braz. Soc. Mech. Sci. & Eng.. Publicado em: 2012
-
4. Performance evaluation of carbide tools on automotive valve guides reaming / Avaliação do desempenho de ferramentas de metal duro no alargamento de guias de válvulas automotivas
Reaming is a machining process with relatively low cost and suitable when high quality holes are required. The purpose of this work is to evaluate the quality of the holes made in automotive valve guides, fabricated with sintered steel. This study was based on parameters of surface roughness, roundness and cylindricity deviations, obtained with uncoated carb
Publicado em: 2009
-
5. Investigação de desvios geométricos no alargamento de ferro fundido com ferramentas revestidas / Investigation of Geometric Deviation in Reaming of Cast Iron with Coated Tools
Durante a produção de um bloco de motor a execução de furos é a operação de usinagem mais comum, e exige operações posteriores a fim de melhorar a qualidade superficial, a precisão de forma e dimensional. Isso é conseguido empregando‐se, entre outras, a operação de alargamento. Este trabalho utilizou um planejamento de experimentos estatí
Publicado em: 2008
-
6. Avaliação dos resultados do uso de haste inflavel auto blocante intramedular (HEIA) para o tratamento de fraturas e falhas de fixação ossea dos ossos longos / Clinical and radiological results from the of a self-locking intramedullary expanding nailing system (SLINS) fixion trade mark for treating failures in long bone fractures
We present a self-locking intramedullary nailing system (Fixion®) for treatment of long bones fractures and failed fixation systems. The features of this system and the advantages of the technique include: fixation along the entire length of the nail, lack of proximal and distal interlocking screws, optional reaming, reduced exposure of the surgeon X-Ray an
Publicado em: 2008
-
7. Crack Revision Improves Fixation of Uncemented HA-coated Implants Compared with Reaming: An Experiment in Dogs
The crack procedure is a surgical technique for preparing the implant cavity at revision of loose joint replacement components. It disrupts the neocortical bone shell that typically forms around the cavity. Using an animal model, we compared the crack technique with reaming. Twenty micromotion implants were inserted bilaterally into the knees of 10 dogs acco
Springer-Verlag.