Quadrature
Mostrando 1-12 de 88 artigos, teses e dissertações.
-
1. Large Displacement Static Analysis of Composite Elliptic Panels of Revolution having Variable Thickness and Resting on Winkler-Pasternak Elastic Foundation
Abstract Nonlinear static response of laminated composite Elliptic Panels of Revolution Structure(s) (EPRS) having variable thickness resting on Winkler-Pasternak (W-P) Elastic Foundation is investigated in this article. Generalized Differential Quadrature (GDQ) method is utilized to obtain the numerical solution of EPRS. The first-order shear deformation th
Lat. Am. j. solids struct.. Publicado em: 20/12/2019
-
2. Existence, Uniqueness, and Approximation for Solutions of a Functional-integral Equation in Lp Spaces
RESUMO Neste trabalho estabelecemos condições que garantem existência e unicidade de solução da equação integral-funcional geral y ( t ) = f ( t , ∫ 0 1 k ( t , s ) g ( s , y ( s ) ) d s ) , t ∈ [ 0 , 1 ] , em L p ( [ 0 , 1 ] ), com 1 p ∞. Utilizamos o Teorema de Ponto Fixo de Banach e aplicamos o método de aproximações sucessi
TEMA (São Carlos). Publicado em: 13/12/2019
-
3. QUADRATURE ALGORITHMS FOR PHASE EQUILIBRIUM OF CONTINUOUS MIXTURES
Abstract Several methods for computing the Gauss-Christoffel quadrature used for the adaptive characterization of continuous mixtures were compared as to their efficiency and robustness. Two mixtures with molar fraction distribution given by truncated gamma distributions were used. We analyzed the Product-Difference, the Golub-Welsch, the Long Quotient-Modif
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
4. An Extended Linear Discontinuous Method for One-group Fixed Source Discrete Ordinates Problems with Isotropic Scattering in Slab Geometry
RESUMO Atualmente, a obtenção de uma solução numérica precisa para problemas de fonte fixa em ordenadas discretas é relevante em muitas áreas da engenharia e das ciências. Neste trabalho, estendemos o método híbrido Elementos Finitos-Espectro Nodal (FEM-SGF), que foi originalmente desenvolvido para resolver problemas de autovalores de difusão, par
TEMA (São Carlos). Publicado em: 30/05/2019
-
5. A numerical study on the aerodynamic performance of building cross-sections using corner modifications
Abstract A numerical investigation is performed in this work in order to evaluate the aerodynamic performance of building cross-section configurations by using corner modifications. The CAARC tall building model is utilized here as reference geometry, which is reshaped considering chamfered and recessed corners. The numerical scheme adopted in this work is p
Lat. Am. j. solids struct.. Publicado em: 30/07/2018
-
6. Free vibration analysis and design optimization of SMA/Graphite/Epoxy composite shells in thermal environments
Abstract Composite shells, which are being widely used in engineering applications, are often under thermal loads. Thermal loads usually bring thermal stresses in the structure which can significantly affect its static and dynamic behaviors. One of the possible solutions for this matter is embedding Shape Memory Alloy (SMA) wires into the structure. In the
Lat. Am. j. solids struct.. Publicado em: 23/04/2018
-
7. Modeling and FPGA-based implementation of an efficient and simple envelope detector using a Hilbert Transform FIR filter for ultrasound imaging applications
Abstract Introduction Although the envelope detection is a widely used method in medical ultrasound (US) imaging to demodulate the amplitude of the received echo signal before any back-end processing, novel hardware-based approaches have been proposed for reducing its computational cost and complexity. In this paper, we present the modeling and FPGA impleme
Res. Biomed. Eng.. Publicado em: 15/01/2018
-
8. Ultrasonic method of microvibration detection: part II - additional processing method and applications
Abstract Introduction In the last 28 years, the scientific community has been using elastography to evaluate the mechanical properties of biological tissue. The aim of this work was the optimization of the UDmV method, presented in Part I of the series, by means of modifying the technique employed to generate the reference sine and cosine functions, used fo
Res. Biomed. Eng.. Publicado em: 17/08/2017
-
9. Free Vibration Analysis of Reinforced Composite Functionally Graded Plates with Steady State Thermal Conditions
Abstract The present paper deals with free vibration of functionally graded fiber reinforced rectangular plates subjected to thermal loads. The rectangular plates are assumed orthotropic. The continuous grading fiber reinforced plates have a smooth variation in matrix volume fraction in the thickness direction. Two different types of volume fraction profiles
Lat. Am. j. solids struct.. Publicado em: 2017-06
-
10. Dynamic Instability of Beams Under Tip Follower Forces Using Geometrically Exact, Fully Intrinsic Equations
Abstract In this study, the dynamic instability of beams under tip follower forces are considered. The beam is modeled by using the geometrically exact, fully intrinsic beam equations which is subjected to an inclined tip follower force. Generalized differential quadrature method is employed to solve the governing equations. The effect of different parameter
Lat. Am. j. solids struct.. Publicado em: 2016-12
-
11. A Differential Quadrature Procedure with Direct Projection of the Heaviside Function for Numerical Solution of Moving Load Problem
Abstract Owing to its particular characteristics, the direct discretization of the Dirac-delta function is not feasible when point discretization methods like the differential quadrature method (DQM) are applied. A way for overcoming this difficulty is to approximate (or regularize) the Dirac-delta function with simple mathematical functions. By regularizing
Lat. Am. j. solids struct.. Publicado em: 2016-09
-
12. Aerothermoelastic Analysis of Functionally Graded Plates Using Generalized Differential Quadrature Method
Abstract In the present paper, the aerothermoelastic behavior of Functionally Graded (FG) plates under supersonic airflow is investigated using Generalized Differential Quadrature Method (GDQM). The structural model is considered based on the classical plate theory and the von Karman strain-displacement relations are utilized to involve the nonlinear behavio
Lat. Am. j. solids struct.. Publicado em: 2016-04