Process Reuse
Mostrando 13-24 de 192 artigos, teses e dissertações.
-
13. First evaluation of semidirect recycling methods for the reclamation of cemented carbides based on a literature survey
ABSTRACT At the moment the industrially applied techniques for cemented carbide reclamation feature several deficiencies. Depending on the process route, obstacles consist in high energy and chemical consumption (indirect recycling methods) or a deterioration of the recycled product in comparison with the primary material (direct recycling approach). Therefo
Matéria (Rio J.). Publicado em: 19/07/2018
-
14. Study of the AISI 52100 Steel Reuse Through the Powder Metallurgy Route Using High Energy Ball Milling
The AISI 52100 is a tool steel used in industry to produce bearings. After the end of its life cycle, it is remelted or discarded in deposits. The powder metallurgy rises as an alternative to recycle this material without any waste. The steps used to produce the AISI 52100 steel by powder metallurgy included: Machining with speed of 45 rpm, high energy ball
Mat. Res.. Publicado em: 06/11/2017
-
15. Extraction of hydrocolloids from Pereskia Aculeata Miller: reuse of process residue as activated carbon for the pigment-removal phase
Abstract Hydrocolloids of Pereskia aculeata Miller (OPNH) are potential ingredients in food industry as emulsifiers and stabilizers. The extraction process of OPNH requires the removal of pigments with activated carbon. Because this step is critical to the quality of the ingredient and has an impact on costs, a new activated carbon has been developed with re
Food Sci. Technol. Publicado em: 26/10/2017
-
16. Influence of SEBS-MA and SBS compatibilizers on properties and morphology of blends of polystyrene/rubber residue (SBRr) from the footwear industry
Abstract The reuse of rubber waste is very important today, both to reduce the harmful effects on the environment, and to reduce the cost of new material development. Considering that most of the studies reported in literature refer to the reuse of tire waste, this article aims to evaluate the influence of styrene-butadiene-styrene (SBS) and styrene-(ethylen
REM, Int. Eng. J.. Publicado em: 2017-06
-
17. Immobilization of lipase on mesoporous molecular sieve MCM-48 obtained using ionic solid as a structure director and esterification reaction on solvent-free
Candida antarctica lipase B (CALB) is an enzyme able to catalyze chemical reaction, however when it is used as a free enzyme, it cannot be recovered from reaction medium. One of the alternatives is to immobilize the enzymes on a support which allows the maintenance of their catalytic activities. The purpose of this paper was to immobilize the CALB on MCM-48
Quím. Nova. Publicado em: 2017-04
-
18. Aplicação da técnica de eletrodiálise no tratamento de efluentes de tingimento de gemas contendo íons nitrato e cromo
The dyeing agate employs large quantities of potentially harmful wastewater to the environment, such as, effluent with chromium and nitrate ions. The aim of the present study was investigate the electrodialysis technique efficiency in the removal of contaminant ions present in wastewater generated by the agate dyeing industry and evaluate the toxicity of the
Quím. Nova. Publicado em: 2016-12
-
19. PRO-ELICERE: A Hazard Analysis Automation Process Applied to Space Systems
ABSTRACT In the last decades, critical systems have increasingly been developed using computers and software even in space area, where the project approach is usually very conservative. In the projects of rockets, satellites and its facilities, like ground support systems, simulators, among other critical operations for the space mission, it must be applied
J. Aerosp. Technol. Manag.. Publicado em: 2016-09
-
20. ESTUDO DA IMOBILIZAÇÃO DE LIPASE EM SÍLICA OBTIDA PELA TÉCNICA SOL-GEL
The objective of this work was the immobilization of the enzyme Candida antarctica lipase B (CAL B) using the sol-gel method of immobilization and three different initiators of the polymerization reaction: one acid (HCl), one basic (NH4OH) and the other nucleophilic (HBr). Tetraethylorthosilicate was used as the silica precursor. The influence of the additiv
Quím. Nova. Publicado em: 2015-03
-
21. Treatment of cattle-slaughterhouse wastewater and the reuse of sludge for biodiesel production by microalgal heterotrophic bioreactors
Microalgal heterotrophic bioreactors are a potential technological development that can convert organic matter, nitrogen and phosphorus of wastewaters into a biomass suitable for energy production. The aim of this work was to evaluate the performance of microalgal heterotrophic bioreactors in the secondary treatment of cattle-slaughterhouse wastewater and th
Sci. agric. (Piracicaba, Braz.). Publicado em: 2014-12
-
22. Characterization of polyurethan skin agglomerates for acoustic insulation from impact noise
Polymeric materials are greatly used in industry due to their versatility in application generating therefore, large quantities of solid waste. Population growth in urban areas, with living quarters mainly in residential buildings, face discomfort caused by noise, particularly by impact noise. Aiming at reducing the amount of polymeric material disposed of i
Mat. Res.. Publicado em: 2014-08
-
23. Epoxidação do β-cariofileno com lipases imobilizadas em gel de ágar
The immobilization of enzymes and microorganisms on solid supports has been developed in recent years. These biocatalysts may be used in organic media allowing their storage and reuse, thus reducing costs of the process. Herein, lipases from various sources were immobilized in agar gel and used as catalysts in the chemo-enzymatic epoxidation of β-caryophyll
Quím. Nova. Publicado em: 2014-07
-
24. Recovery of copper (II) absorbed in biomass of Cladosporium cladosporioides
The biosorption process, characterized by the use of biomass for removing metals from aqueous solutions, is an attractive technology using inactive and dead biomasses to remove heavy metals from aqueous solutions in the absence of metabolic activity necessary for intracellular accumulation. The desorption process, which concentrates the metal previously abso
Sci. agric. (Piracicaba, Braz.). Publicado em: 2013-06